Presentation is loading. Please wait.

Presentation is loading. Please wait.

Professor John Canny Spring 2004

Similar presentations


Presentation on theme: "Professor John Canny Spring 2004"— Presentation transcript:

1 Professor John Canny Spring 2004
CS 160: Lecture 16 Professor John Canny Spring 2004 4/3/2019

2 Outline More on user testing Basics of quantitative methods
Choosing participants Designing the test Basics of quantitative methods Collecting data Analyzing the data 4/3/2019

3 Why do User Testing? Can’t tell how good or bad UI is until?
people use it! Other methods are based on evaluators who: may know too much may not know enough (about tasks, etc.) Summary Hard to predict what real users will do Jakob Nielsen 4/3/2019

4 Choosing Participants
Representative of eventual users in terms of job-specific vocabulary / knowledge tasks If you can’t get real users, get approximation system intended for doctors get medical students system intended for electrical engineers get engineering students Use incentives to get participants 4/3/2019

5 Incentives Paying every subject a fixed amount can be too expensive.
A small chance at a large reward is a good incentive – e.g. subjects get a 1/n chance to receive an MP3 player. Offer to tell them the results of the study. Free software for software companies. Some courses require participation as research subjects. 4/3/2019

6 Ethical Considerations
Sometimes tests can be distressing users have left in tears (embarrassed by mistakes) You have a responsibility to alleviate make voluntary with informed consent avoid pressure to participate will not affect their job status either way let them know they can stop at any time stress that you are testing the system, not them make collected data as anonymous as possible 4/3/2019

7 Ethical Considerations
Get human subjects approval if needed – typically if results are going to be published. Universities always have human subjects panels, so do government agencies. 4/3/2019

8 User Test Proposal A report that contains
objective description of system being testing task environment & materials participants methodology tasks test measures Get approved & then reuse for final report 4/3/2019

9 Qualitative vs. Quantitative Studies
Qualitative: What we’ve been doing so far: Contextual Inquiry: trying to understand user’s tasks and their conceptual model. Usability Studies: looking for critical incidents in a user interface. In general, we use qualitative methods to: Understand what’s going on, look for problems, or get a rough idea of the usability of an interface. 4/3/2019

10 Qualitative vs. Quantitative Studies
Use to reliably measure something. Requires us to know how to measure it. Examples: Time to complete a task. Average number of errors on a task. Users’ ratings of an interface *: Ease of use, elegance, performance, robustness, speed,… * - You could argue that users’ perception of speed, error rates etc is more important than their actual values. 4/3/2019

11 Quantitative Methods Very often, we want to compare values for two different designs (which is faster?). This requires some statistical methods. We begin by defining some quantities to measure - variables. 4/3/2019

12 Variable types Independent Variables: the ones you control
Aspects of the interface design Characteristics of the testers Discrete: A, B or C Continuous: Time between clicks for double-click Dependent variables: the ones you measure Time to complete tasks Number of errors 4/3/2019

13 Deciding on Data to Collect
Two types of data process data observations of what users are doing & thinking bottom-line data summary of what happened (time, errors, success…) i.e., the dependent variables 4/3/2019

14 Process Data vs. Bottom Line Data
Focus on process data first gives good overview of where problems are Bottom-line doesn’t tell you where to fix just says: “too slow”, “too many errors”, etc. Hard to get reliable bottom-line results need many users for statistical significance 4/3/2019

15 The “Thinking Aloud” Method
Need to know what users are thinking, not just what they are doing Ask users to talk while performing tasks tell us what they are thinking tell us what they are trying to do tell us questions that arise as they work tell us things they read Make a recording or take good notes make sure you can tell what they were doing 4/3/2019

16 Thinking Aloud (cont.) Prompt the user to keep talking
“tell me what you are thinking” Only help on things you have pre-decided keep track of anything you do give help on Recording use a digital watch/clock take notes, plus if possible record audio and video (or even event logs) 4/3/2019

17 Break 4/3/2019

18 Some statistics Variables X & Y A relation (hypothesis) e.g. X > Y
We would often like to know if a relation is true e.g. X = time taken by novice users Y = time taken by users with some training To find out if the relation is true we do experiments to get lots of x’s and y’s (observations) Suppose avg(x) > avg(y), or that most of the x’s are larger than all of the y’s. What does that prove? 4/3/2019

19 Significance The significance or p-value of an outcome is the probability that it happens by chance if the relation does not hold. E.g. p = 0.05 means that there is a 1/20 chance that the observation happens if the hypothesis is false. So the smaller the p-value, the greater the significance. 4/3/2019

20 Significance For instance p = means there is a 1/1000 chance that the observation would happen if the hypothesis is false. So the hypothesis is almost surely true. Significance increases with number of trials. CAVEAT: You have to make assumptions about the probability distributions to get good p-values. There is always an implied model of user performance. 4/3/2019

21 Normal distributions Many variables have a Normal distribution
At left is the density, right is the cumulative prob. Normal distributions are completely characterized by their mean and variance (mean squared deviation from the mean). 4/3/2019

22 Normal distributions The difference between two independent normal variables is also a normal variable, whose variance is the sum of the variances of the distributions. Asserting that X > Y is the same as (X-Y) > 0, whose probability we can read off from the curve. 4/3/2019

23 Analyzing the Numbers Example: prove that task 1 is faster on design A than design B. Suppose the average time for design B is 20% higher than A. Suppose subjects’ times in the study have a std. dev. which is 30% of their mean time (typical). How many subjects are needed? 4/3/2019

24 Analyzing the Numbers Example: prove that task 1 is faster on design A than design B. Suppose the average time for design B is 20% higher than A. Suppose subjects’ times in the study have a std. dev. which is 30% of their mean time (typical). How many subjects are needed? Need at least 13 subjects for significance p=0.01 Need at least 22 subjects for significance p=0.001 (assumes subjects use both designs) 4/3/2019

25 Analyzing the Numbers (cont.)
i.e. even with strong (20%) difference, need lots of subjects to prove it. Usability test data is quite variable 4 times as many tests will only narrow range by 2x breadth of range depends on sqrt of # of test users This is when online methods become useful easy to test w/ large numbers of users (e.g., Landay’s NetRaker system) 4/3/2019

26 Lies, damn lies and statistics…
A common mistake (made by famous HCI researchers *) Increasing n (number of trials) by running each subject several times. No! the analysis only works when trials are independent. All the trials for one subject are dependent, because that subject may be faster/slower/less error-prone than others. * - making this error will not help you become a famous HCI researcher . 4/3/2019

27 Statistics with care: What you can do to get better significance:
Run each subject several times, compute the average for each subject. Run the analysis as usual on subjects’ average times, with n = number of subjects. This decreases the per-subject variance, while keeping data independent. 4/3/2019

28 Measuring User Preference
How much users like or dislike the system can ask them to rate on a scale of 1 to 10 or have them choose among statements “best UI I’ve ever…”, “better than average”… hard to be sure what data will mean novelty of UI, feelings, not realistic setting, etc. If many give you low ratings -> trouble Can get some useful data by asking what they liked, disliked, where they had trouble, best part, worst part, etc. (redundant questions) 4/3/2019

29 B A Using Subjects Between subjects experiment
Two groups of test users Each group uses only 1 of the systems Within subjects experiment One group of test users Each person uses both systems 4/3/2019

30 Between subjects Two groups of testers, each use 1 system Advantages:
Users only have to use one system (practical). No learning effects. Disadvantages: Per-user performance differences confounded with system differences: Much harder to get significant results (many more subjects needed). Harder to even predict how many subjects will be needed (depends on subjects). 4/3/2019

31 Within subjects One group of testers who use both systems Advantages:
Much more significance for a given number of test subjects. Disadvantages: Users have to use both systems (two sessions). Order and learning effects (can be minimized by experiment design). 4/3/2019

32 Example Same experiment as before: Within subjects: Between subjects:
System B is 20% slower than A Subjects have 30% std. dev. in their times. Within subjects: Need 13 subjects for significance p = 0.01 Between subjects: Typically require 52 subjects for significance p = 0.01. But depending on the subjects, we may get lower or higher significance. 4/3/2019

33 Experimental Details Order of tasks Training
choose one simple order (simple -> complex) unless doing within groups experiment Training depends on how real system will be used What if someone doesn’t finish assign very large time & large # of errors Pilot study helps you fix problems with the study do 2, first with colleagues, then with real users 4/3/2019

34 Reporting the Results Report what you did & what happened
Images & graphs help people get it! 4/3/2019

35 Summary Use real tasks & representative participants
Be ethical & treat your participants well Want to know what people are doing & why i.e., collect process data Using bottom line data requires more users to get statistically reliable results 4/3/2019


Download ppt "Professor John Canny Spring 2004"

Similar presentations


Ads by Google