1. Fire Training
Fire Marshals

2. What to do when the Fire Alarm sounds
Fire Marshals
What to do when the Fire Alarm sounds

3. Step 1- Assemble at the reception area

4. Step 2- Open the Fire Box and hand out Fire Cards and Hi-Vis vests

5. Check Fire panel, make note of alarm zone and time of activation
Step 3- Fire Card 1 – Take charge of the evacuation (You are now the Fire Manager)
Check Fire panel, make note of alarm zone and time of activation
Hand out Fire Cards and give clear instructions on what to do
Record all Report Back information
Meet Fire department and hand over all information collected

6. If someone is missing, ask about where they were last seen
Step 4- Fire Card 2 – Take sign-in book to assembly point and perform a roll call (Report back to the Fire Manager)
Ensure you do a complete Roll Call including Employees, Volunteers, Riders, Carers, Visitors and Contractors
If someone is missing, ask about where they were last seen
Report back to Fire Manager

7. Only Sweep a area if instructed to do so by the Fire Manager
Step 5- Fire Card 3 – Sweep the viewing area, if safe to do so ( Report back to Fire manager)
Only Sweep a area if instructed to do so by the Fire Manager
Do not fully enter the viewing area but rather call out from the entrance
Close all doors behind you as you leave
Report back to the Fire Manager

8. Step 6- Assemble at the designated Fire Assembly Point and await further instructions