Presentation on theme: "TECHNO CANADA INC. 607,CHERITON CRESCENT EDMONTON,ALBERTA,"— Presentation transcript:
1 TECHNO CANADA INC. 607,CHERITON CRESCENT EDMONTON,ALBERTA, CANADA T6R 2N3Tel:Fax:Webpage:
2 OUR VISION OUR MISION COMPANY PROFILE To be the most preferred independent Oil field service provider in the industry with world class standards of Health, Safety, Environment and Quality.OUR MISIONTo make world class Health, Safety, Environment and Quality a way of life within the company. To create a working environment in which our work force can achieve job satisfaction and career development. To provide our clients professional oil field services with the most qualified personnel and equipment.COMPANY PROFILETechno Canada Inc. (TCI) is a company incorporated in Alberta under the laws of Canada in the year May 2002.TCI has been formed by professionals with a core background in the oil & gas upstream industry. Our experience ranges acrossthe board from Well Testing, Nitrogen Services, Production Operations, Wireline Logging, Coil Tubing, Drill Stem Testing(Open Hole & Cased Hole) TCI personnel have been involved in major projects on shore and offshore.
3 Surface Testing Mission Statement TCI is a Canadian Production Testing company currently operating in S E ASIA. Our equipment has been broughtinto the region. It is our aim to provide International Quality Testing Operations in SEA, fully compliant with SafetyStandards, Business Management to Canadian business standards, at a realistic total project cost.The equipment list is as per the attached document which gives the ratings and Technical data on the different Surfacetest Equipment we have in the region. The test packages are suitable for onshore and offshore application. Anyadditional equipment or equipment not already brought into SEA can be mobilised from yards in Canada, India,Singapore or from Stockists in the Middle East depending upon the time frame of the project.TCI’s method of operation is to have the Crew Chief and Supervisors brought in from Canada and have the operatorsas local experienced testers. This we believe will provide the optimum value to our clients. We will have an Operations Co-ordinator who will be co-ordinating all the day to day operational requirements with the local clients at their HO. He shall behaving single point responsibility for all non testing related issues like Logistics, Administration, Movement, LocalProcurement etc. This enables the Crew Chief to focus on the critical testing related issues, and provides anoptimum level of performance.We provide well test analysis using Fekete Field notes which is globally accepted, and AEUB compliant.Our equipment is rated to API, ASME, NACE, ANSI, and BIS standards as applicable. Each and every component of our testspread has fully traceable OEM documentation. Unless otherwise stated our equipment is NACE compliant.HSE is monitored by our General Manager with field level documentation for Near Miss, Field Level Risk Assessment(FLRA), Incident Reporting, Root Cause Analysis, and Tool Box Talk.
4 ACCURACYTCI Production Services design and selection of test equipment, no matter how elaborate, is based upon certain fundamentalrequirements. All components should be sized so that anticipated maximum and minimum production will lie within the peakaccuracy range of the equipment. .Career In TciCareers Success without boundaries A tradition of excellenceEach day, we help our customers find and produce oil and gas with respect for the environment. We're looking for men and women to join our global family in this effort. We know the work is tough. But, if you're ambitious, innovative, and hard working, a TCI career may be for you. We will require trained field hands as well as operators, logistics & administration personnel to help streamline our expanding operations.We hope you'll read more about what we have to offer and contact us for more information.
5 INTRODUCTION AND SCOPE Techno Canada Inc. is a Canadian Company incorporated in Edmonton providing Oil Field Services, (Well Testing, Slick line,) to the oil patch .This Q.C. manual outlines the basic QC/QA practices and procedures necessary for the execution of turnkey projects as per international codes and standards and adopted. Conformance to quality standards shall also be assured as per the quality procedures / standards which may be mandated by purchaser contract.--CODESAll TCI Equipment being purchased, owned, operated, leased, hired and utilized for oil well services shall meet as a minimum, the following CODES as applicable.This list is non-exhaustive.API-6A,14A, 6D,ASME-B31.3, SECVIII DIV-1, 16.5,NACE-MR-01-75,DNV-271, A-60,SI-289,SI-913,SI-2932,ABSA,NPDHSE POLICY STATEMENTTCI embraces a 100% safe culture and places the protection of people from injury or illness above all other management considerations. No employee will be expected, directed or encouraged to expose themselves or others to uncontrolled risk in order to satisfy a work related requirement.TCI recognizes and accepts its moral obligation to society and therefore will create work places that preserve the environment for future.All TCI employees are expected to embrace these values and nurture the 100% safe culture. Those whose work ethic conflicts with TCI’s philosophy in these critical areas will be coached into compliance or encouraged to find alternative employment.TCI will not waiver in its commitment to its values and principles.
6 OIL FIELD SERVICES Surface Well Testing / Early Production Slickline Drill Stem TestingWorkover RigBottom Hole SamplingTubular RentalWell DeliverabilityAir CompressorSeismic Data Acquisition
8 EMERGENCY SHUT DOWN VALVE (ESDV) WELL TEST EQUIPMENTS30” THREE PHASE SEPARATORCHOKE MANIFOLDTEST FLOWHEADEMERGENCY SHUT DOWN VALVE (ESDV)
9 EQUIPMENT SPECIFICATIONS Flow HeadHydraulically open flow wing valve, Bottom connection: 2 7/8” & 3 ½” tubingMinimum Id: 2.25”, 3 1/16”, 10,000 Psi Gate valve. Co-flexip HoseLength: 33 & 45 feet, Pressure Rating: 10,000 psi, Service : Sour3” 1502 End Connections Fitted with Saver Subs to Protect Threads Choke ManifoldRating : 10,000 Psi / 5,000 Psi, Service : SourAPI 6a, PSL 2, PR 3, Solid Block Gate Valve Fixed & Adjustable chokes, 5 Valve Configuration.4. Data HeaderA) 10,000 Psi, 5,000 Psi, Data Headers complete with PG, TG, Injection points.B) Barton 10,000 Psi, 5,000 Psi Pressure Recorder, Dead Weight Tester.C) Methanol / PPD / glycol dosing pump.5. 3 Phase, 1440 psi SeparatorSizes : 30”, 36”, 42”, 1,440 psiRating : 600 Class ANSI, Service : SourDaniel Senior Flow Meter, Halliburton Turbine FlowmeterASME U Code Vessel, Dual Safety Relief System
10 PIPINGSAND SEPARATORGROUND FLARE3 HEAD SEA SNAKE BURNER
11 ESDV + ESDP System3”, 10,000 Psi / 5,000 Psi Hydraulic Operated Gate Valve, Air Fail Safe Closed, Hydraulic Single Circuit Control / ESD Panel complete with Hi-Lo Pilots, Remote Push Button Station, Hydraulic Actuator Quick Exhaust. Operating Air Pressure: 150 PsigIndirect HeaterFire box rating : 1.5 / 2.5mm BTU/hr, Tube size : 20” NPS SCH 10Test pressure : 5,000 Psig, Tube Test Temperature : -50°C to 200°C BBL Storage TanksFlexible hose connections, 2” steam circulation header insulated inlet,C/w recirculation pump for crude circulationBBL Surge TankPressure rating : 50Psi, Flexible hoses rating : 150 Psi & 300 PsiDual Compartment with level gauges.BBL Gauge TankDouble compartment with level gaugesPressure rating : Atmospheric, Flexible hoses rating : 150 Psi & 300 Psi Crude Oil Transfer PumpsEx-proof motor, starter, SS Internals with manifoldDischarge Pressure : 100 Psi, Discharge Volume : 5,000 BPDOil and Gas Diverter ManifoldsTo Divert Oil And Gas To Burner, Pressure Rating : 150 Psi & 300 Psi. Air CompressorsTotal minimum 750 SCFM capacity, to be supplied by two units hose length: 400ft. 14. Flare Ignition System with Ground Flare Capacity – 5 MMSCFD.Multi Head Burner, Auto Electric Ignition System
12 COFLEXIP HOSE48” THREE PHASE SEPARATORINDIRECT HEATER
13 Piping10,000Psi, 5,000 Psi & 2,000 Psi API 6a Piping With 1502, 602 & 206 Hammer Unions, Elbow’s Complete with all X-Overs. Service – Sour Service: SweetChemical Injection PumpOperating Pressure: 50 to 100 psiSuitable for methanol, de-emulsifier, pour point depressant etc.Sand Detector2” 1502 hammer unions 10,000 psi rated to be suited upstream of choke manifoldElectronic detection system with sand concentration outputSample BottlesHigh pressure, Oil and GasGas : 3,000 Psi, 20 Ltrs. Oil : 10,000 Psi, 600 CC, IATA confirming19. Mobile LaboratoryCapable of crude oil volumetric calculations.Gas flow & gas gravity calculations.Salinity, H2S / CO2 analysis.Gas & Oil sampling system.20. Safety EquipmentFire extinguishers, Gas SniffersPortable CO2 and H2S Detection EquipmentsHand held Radios and spare batteries
16 SLICKLINE (DOUBLE DRUM) UNIT SPECIFICATION Basic configuration:Power Pack, 4-Cylinder,Diesel Driven, EX Zone 2Operating Temperature: -20ºc to 40ºcTransport Dimension: 1865 X 1200 X 1420Transport Weight: 1750 Kgs.Maximum Rating: 2500 Kgs.Drive System:Compressor, Belt Driven, Air ReceiverDiesel Engine 4 Cylinder, ( RPM)Liquid Cooled Engine, Natural Aspirated, Zone 2Starting System Spring (Ex Zone 2 With Hand Crank, Suitable For 6Liter Displacement Engine)Features:4 Cylinders Diesel Engine 79 2,500 RPMZone 2 Rated EngineAir Operated Non-Asbestos Brake System375 Bar (5,438 Psi) Closed Loop Hydraulic SystemSuitable For All Wire Sizes With Same Hydraulic System CreatingExtreme Flexibility.Superior Sound Proofing And Thermal Insulation Properties.Easy to Maintain.
17 SLICKLINE MEMORY LOGGING TOOL The Mini Logging Tool (MLT) is a compact version of a production logging tool. Designed with four sensors, the MLT can provide correlated data on pressure, temperature, depth and flow rates.The MLT is designed to be a modular tool. The 3 main modules are the platinum Resistant Temperature Detector (RTD) module, the Casing Collar Locator (CCL), and the Pressure/Flow module.The Platinum RTD provides a fast and high resolution temperature profile along the wellbore. The RTD module uses dual Platinum RTD's to measure temperature. Using dual RTD’s increases the sensitivity of the module, and negates the chances of the RTD being shielded by the MLT not being centred within the tubing string.The electromagnetic CCL measures depth by measuring the change in electromagnetic field that occurs at each casing, or tubing collar. Since the length of each joint is known, tool depth can be inferred from this depth, and correlated with the rest of the data. The Pressure/Flow module is economical in design. The external housing is universal. Different calibrated modules are then inserted into the external housing, depending on what pressure range the tool will be encountering.The MLT also uses a replaceable memory module. The memory module us connected to the top module within the string. Modules can be interchanged, allowing for the module to be changed out, and a second survey to be done with a new module, while the first module is downloaded. Any combination of modules can be used at one time. The only restraint is that only 1 Pressure/Flow module can be used at once, and it must be run at the bottom of the string.
18 DST TOOLS WITH SPECIFICATION FULL BORE DST TOOL STRINGS ARE AVAILABLE IN 3.125” OD & 5.000” ODFULL BORE ONSHORE DST SCHEMATICFULL BORE TEST PACKER
19 DST TOOLS WITH SPECIFICATION FULL BORE BELOW PACKER SAFETY JOINTFULL BORE CIRCULATING VALVE
20 DST TOOLS WITH SPECIFICATION FULL BORE GAUGE CARRIERFULL BORE HYDRAULIC JAR
21 Seismic Data Acquisition Specification Line Telemetry SystemGround ElectronicsPeripheral EquipmentCableGeophonesField Data ProcessingPlotter (s)PrintersShooting SystemUphole (LVL Surveys)SurveyDrillingMechanized Equipment: ArdcoBuggy Drills (4x4 wheeled),depth metersManual Rotary: SS 175 manportable ( modular), depth 50-60metersManual Hand Drill: PH5000 hand auger, depth 3-5 meters
22 Bottom Hole SamplingTCI provides for bottom hole sampling to taking of representative reservoir fluid samples. The sampler can also be operated to take Single Phase Samples (SPS) from which samples are maintained at a pressure above the reservoir pressure, back to the PVT laboratory. Samples, when analyzed, provide data vital for the economic and technical evaluation of the reservoir.The sampler is run on wire line (slick or electric) and can be triggered by amechanical firing device or surface firing via an electric line. Multiple samplerscan also be run simultaneously.For transportation of samples, a range of cylinders (700 ml) can be suppliedwith pressure ratings of 5,000, 10,000 and 15,000 psi. For the USA market,DOT-approved cylinders are also available.OPERATION PARAMETERS:The material of construction of the sampling tool and transportation cylinders isNACE (National Association of Corrosion Engineers) approved for"SOUR GAS" service.Sample Volume : 600 ml, Max. Working Pressure : 15,000 psi at 180°C (356°F)Length : PDS: 12' 1" (3,680 mm), SPS: 16' 7" (5,054 mm)Weight : PDS: 61.6 lb (28 kg), SPS: 74.8 lb (34kg),Outside Diameter : 1-11/16 " (43 mm)
23 BOTTOM HOLE SAMPLING Description: P.D.S. S.P.S. MK II, Sampling tool is a device for taking in-situ reservoir samples. The purpose of the is to provide a high quality representative sample which is maintained in single phase (using nitrogen gas). Subsequent PVT analysis of sample can provide data for economic and technical evaluation of a reservoir. The tool has been designed to operate in most environments and consistently produce representative samples regardless of the or conditions. Transportation box available.Volume:600 ml Sample, 450 ml NitrogenM.A.W.P: 1035 Bar 180 Deg C, (15, Deg F)Material: 17-4 PH STSTL (AISI 630), Aluminium Bronze CA104. All conform to N.A.C.E. MRO 175 latest review.Net weight: 34 kg (75 lb) Dimensions: Diameter: 1 11/16”(43 mm)Length: 16’ 7” (5054 mm)
24 Well Deliverability Well Deliverability: Accurate forecasting of Gas Productionrequires integrating reservoir volumes(reserve), Sand Face and WellheadDeliverability, Well Bore Hydraulic,Pipeline and compression capacity andother factors such as sales contracts.This is achieved by the understandingthe inter-relationship between Reserves,Deliverability and Gas GatheringSystems.
25 WELL DELIVERABILITY Well Deliverability: Reserves Evaluation Reservoir Engineering & SimulationProduction OptimizationDeliverability (IPR Curves)Open Flow Potential
26 Premium Tubular Rental Services TCI are also providing our clients with the added facility of renting of Premium Tubular Connections for Well Testing.Specially required in the case of HPHT wells these Premium Tubulars are Gas Tight to pressure in excess of 10,000 psi with two step threads.Our inspectors will be available at site, to inspect the tubulars running services to ensure it’s done in the optimum means, with minimum Tripping and POOH operations for the specific services.