Presentation is loading. Please wait.

Presentation is loading. Please wait.

Brief Introduction to (VUV/)Soft X-ray FELs

Similar presentations


Presentation on theme: "Brief Introduction to (VUV/)Soft X-ray FELs"— Presentation transcript:

1 Brief Introduction to (VUV/)Soft X-ray FELs
ICFA Workshop on Future Light Sources March 5th-9th, 2012 Thomas Jefferson National Accelerator Facility Newport News, VA Brief Introduction to (VUV/)Soft X-ray FELs R. P. Walker Diamond Light Source, UK

2 Status of VUV/Soft X-ray FELs
Working definition: VUV: ~200 nm – ~20 nm (5 eV – 50 eV) Soft X-ray: ~20 nm – ~1 nm (50 eV – 1 keV) Operating FLASH (Germany) - so far the only operating soft X-ray User facility (Italy) - call for proposals issued; 1st external users later this year Planned NGLS (US): 0.28 – 1.2 keV WiFEL (US): 5 – 900 eV SPARX-FEL (Italy) : 30 eV – 2 keV JLAB VUV FEL (JLAMP) (US): 600 MeV cw recirculating linac, oscillator FEL eV

3 Note that X-ray FEL facilities may also operate in the soft X-ray range, or contain specific soft-X-ray FELs e.g. LCLS: has operated down to 400 eV European XFEL SASE3: 4.7 nm – 0.4 nm (260 eV to 3 keV) SwissFEL “Athos” at 2.4/3.1 GeV: 7 – 0.7 nm, variable polarization, HHG seeding + single-stage HGHG (or other scheme) PAL-XFEL SXFEL1 at 3 GeV: 1-10 nm

4 Many (X)FEL test facilities are in the soft X-ray range
Operating SCSS (Japan): 250 MeV SPARC (Italy): 200 MeV Shanghai Deep-UV FEL (SDUV): 150 MeV Construction Shanghai Soft X-ray FEL (SXFEL) approved in Feb. 2011; construction started early 2012 840 MeV normal conducting S-band + C-band linac possible future upgrade to 1.3 GeV for soft X-ray user facility Planned CLARA (UK) LUNEX5 (France) See separate session on test facilities

5 Not to mention several projects that have “fallen by the wayside ..”
4GLS BESSY FEL LUX Arc-en-ciel NLS … technically not dead, just not proceeding at the moment .. Fallen by the Wayside, E.Bundy, 1886.

6 FLASH Radiation Parameters 2011
Wavelength range (fundamental) 4.1 – 45 nm Average single pulse energy 10 – 400 μJ Pulse duration (FWHM) 50 – 200 fs Peak power 1 – 3 GW Average power (example for 3000 pulses/sec) ~ 300 mW Spectral width (FWHM) ~ % Average Brilliance – 1021 * Peak Brilliance – 1031 * * photons/s/mrad2/mm2/0.1%bw > 150 publications on photon science, many in high impact journals 3740 hours of SASE delivery Sep – Sep. 2011 Accelerator up-time ~ 96% SASE delivery to experiments ~ 75% (rest is tuning, set-up etc.)

7 FLASH-II Construction has started Commissioning May 2013 SASE: 4-60 nm
HHG seeded: nm (at 100 kHz)

8 FERMI@Elettra S-band linac 1.2 GeV (later 1.5 GeV)
FEL-1: HGHG down to 10nm Status: operating nm FEL2: two stage HGHG with fresh bunch technique, to 4 nm (1.5 GeV) Status: install & commission in 2012 8

9 FERMI@ELETTRA Photon Beam Parameters to date
Photon energy range 19‐62 eV (20‐65 nm) Tunability ~ 5% Polarization LV/LO/LC/RC Energy/pulse 20‐ 30 μJ Estimated pulse length <150 fs Repetition rate 10 Hz FEL mode TEM00 FEL bandwidth 30‐90 meV n(FWHM) FEL bandwidth ΔE/E= 6x10‐4 (rms) Photon energy fluctuations ~1.1 meV (rms) FEL bandwidth fluctuations ~ 3% (rms)

10 Wisconsin FEL (WiFEL) 100 200 Beam switchyard with RF separators 300
100 200 Beam switchyard with RF separators Experimental Areas 300 400 500 600 700 m Undulators Monochromators SRF gun Bunch compressors Superconducting L- band electron linear accelerator 1.7 GeV 2.2 GeV 2.2 GeV CW SC linac with RF separation for many high-rep-rate beamlines Low charge bunches (200 pC) Seeding with High Harmonic Generation sources Cascaded harmonic generation without “fresh bunch” Development of a superconducting cw 200MHz electron gun is underway

11 NGLS High rep. rate soft X-ray FEL facility; 2.4 GeV cw s/c linac
Up to 106 pulses per second Seeded Ultrashort pulses from 250 as – 250 fs Narrow energy bandwidth to 50 meV Adjustable photon energy from 280 eV – 1.2 keV Polarization control 3 initial beamlines: Seeded or self-seeded 2 color seeded SASE or self-seeded 10 μs 5 – 150 fs ~10–100 fs 0.25 – 25fs ≤1 μs 5 – 250 fs Up to 100 kHz High resolution ~Time-bandwidth limited 1011 – 1012 photons/pulse 10-3 – 5x10-5 ∆w/w Highest rep rate, MHz High flux photon/pulse 100 W Up to 100 kHz Ultra-fast 250 as pulses Two color 108 ph/pulse Diffractive imaging (at highest rate) Photon correlation spectroscopy High-resolution spectroscopy Diffractive imaging (with harmonics) Multidimensional X-ray spectroscopy

12 NGLS LBNL submitted a proposal to DoE in December 2010
DOE approved CD-0: “Mission Need” for a Next Generation Light Source in April 2011 Currently no DOE budget to pursue a Project LBNL is Performing Accelerator and Detector R&D Performing feasibility studies which will inform a Conceptual Design

13 Users’ Requirements high pulse energy transverse coherence
fs pulses (or less) polarization control easy tunability multiple, simultaneous users high repetition rate regularly spaced pulses THz radiation in synchronism with FEL two-colour FEL pulses longitudinal coherence / pulse uniformity* high degree of amplitude stability* small linewidth* precise synchronism with lasers for pump-probe expts.

14 Users’ Requirements high pulse energy transverse coherence
fs pulses (or less) polarization control easy tunability multiple, simultaneous users high repetition rate regularly spaced pulses THz radiation in synchronism with FEL two-colour FEL pulses longitudinal coherence / pulse uniformity* high degree of amplitude stability* small linewidth* precise synchronism with lasers for pump-probe expts. Most requirements not specific to soft X-rays … Especially for soft-X-ray FELs (?) .. that was the view, but now XFEL users are starting to demand such properties

15 Users’ Requirements high pulse energy transverse coherence
fs pulses (or less) polarization control easy tunability multiple, simultaneous users high repetition rate regularly spaced pulses THz radiation in synchronism with FEL two-colour FEL pulses longitudinal coherence / pulse uniformity* high degree of amplitude stability* small linewidth* precise synchronism with lasers for pump-probe expts. SASE Seeded * or oscillator

16 Users’ Requirements high pulse energy transverse coherence
fs pulses (or less) ……………………………….many different schemes polarization control …………… APPLE/DELTA/crossed undulator etc. easy tunability …………………………………… variable gap undulator multiple, simultaneous users ………… electron switchyard schemes high repetition rate ………………………………… superconducting RF regularly spaced pulses ………………………. cw superconducting RF THz radiation in synchronism with FEL ……………… (pre)/afterburner two-colour FEL pulses ………………………………..… various schemes longitudinal coherence / pulse uniformity* high degree of amplitude stability* small linewidth* precise synchronism with lasers for pump-probe expts.

17 Technical Issues Seeding:
- laser sources for shorter wavelength and higher rep. rate - seeding / modulation / harmonic generation schemes - modelling thereof Electron beam optimisation: Bunch compression – how many? Seeded FELs in particular require: - e- pulse shape control: flat slice parameters  flat gain length over length of seed pulse + timing jitter; even more for “fresh-bunch” schemes - timing jitter reduction due to linac phase and voltage fluctuations  careful optimisation of gun + linac parameters to meet these requirements

18 Technical Issues Electron sources
- development of a low emittance, high rep rate injector, is still an an area of active R&D (see session on Electron Sources) Electron beam switching schemes for multiple FELs - magnetic or RF separation ? tolerances … Diagnostics (electron & photon) for low charge, short pulses

19 In addition, a big issue is COST particularly for high repetition rate FELs, SCRF technology, especially cw SCRF, is very expensive: cw SCRF (NLS, NGLS, WiFEL) Science driven “Cost” pulsed SCRF (FLASH, EXFEL) ~ 1 kHz NCRF currently no demand, but is there a “niche” ? ~ 100 Hz NCRF (LCLS, SACLA, PAL XFEL, SwissFEL etc.) “Rep. rate”

20 Given the wavelength range and type of machine,
how to reduce costs ? …… reduce electron beam energy BUT: Science driven Shorter period undulators  higher field new designs, materials …SCUs ?  lower gap – what really is the limit ?? Higher harmonics - schemes to enhance harmonic output (e.g. phase jumps) - seeding and harmonic generation schemes Ultra-low emittance guns - “conventional” guns at low charge - novel electron sources Could be an interesting combination.. But reduced pulse energy ..

21 Thanks for your attention


Download ppt "Brief Introduction to (VUV/)Soft X-ray FELs"

Similar presentations


Ads by Google