Presentation is loading. Please wait.

Presentation is loading. Please wait.

Topic 5 NavierStokes Equations

Published byAde Chandra Modified over 5 years ago

Similar presentations

Presentation on theme: "Topic 5 NavierStokes Equations"— Presentation transcript:

1 Topic 5 NavierStokes Equations
AE/ME 339 Computational Fluid Dynamics (CFD) K. M. Isaac Professor of Aerospace Engineering 2/24/2019 Topic 5 NavierStokes Equations

2 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR “ in the phrase ‘computational fluid dynamics’ the word ‘computational’ is simply an adjective to ‘fluid dynamics.’ ” -John D. Anderson 2/24/2019 Topic 5 NavierStokes Equations

3 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR Equations of Fluid Dynamics, Physical Meaning of the terms, Forms suitable for CFD Equations are based on the following physical principles: .Mass is conserved .Newton’s Second Law: F = ma .The First Law of thermodynamics: De = dq - dw, for a system. 2/24/2019 Topic 5 NavierStokes Equations

4 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR The form of the equation is immaterial in a mathematical sense. But in CFD applications, success or failure often depends on in what form the equations are formulated. This is a result of the CFD techniques not having firm theoretical foundation regarding stability and convergence, von Neumann’s stability analysis notwithstanding. Recall that von Neumann stability analysis is applicable only for linear PDEs. The Navier-Stokes equations are non-linear. 2/24/2019 Topic 5 NavierStokes Equations

5 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR An important associated topic is the treatment of the boundary conditions. This would depend on the CFD technique used for the numerical solution of the equations. Hence the term, “numerical boundary condition.” Control Volume Analysis The governing equations can be obtained in the integral form by choosing a control volume (CV) in the flow field and applying the principles of the conservation of mass, momentum and energy to the CV. 2/24/2019 Topic 5 NavierStokes Equations

6 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR The resulting PDE and the original integral form are in the “conservation form.” If the equations in the conservation form are transformed by mathematical manipulations, they are said to be in the “non-conservation” form. see Figure (next slide) 2/24/2019 Topic 5 NavierStokes Equations

7 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR 2/24/2019 Topic 5 NavierStokes Equations

8 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR Consider a differential volume element dV in the flow field. dV is small enough to be considered infinitesimal but large enough to contain a large number of molecules for continuum approach to be valid. dV may be: fixed in space with fluid flowing in and out of its surface or, moving so as to contain the same fluid particles all the time. In this case the boundaries may distort and the volume may change. 2/24/2019 Topic 5 NavierStokes Equations

9 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR Substantial derivative (time rate of change following a moving fluid element) Insert Figure 2.3 2/24/2019 Topic 5 NavierStokes Equations

10 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR The velocity vector can be written in terms of its Cartesian components as: where u = u(x, y, z, t) v = v(x, y, z, t) w = w(x, y, z, t) r = r (x, y, z, t) 2/24/2019 Topic 5 NavierStokes Equations

11 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR @ time t1: @ time t2: Using Taylor series 2/24/2019 Topic 5 NavierStokes Equations

12 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR The time derivative can be written as shown on the RHS in the following equation. This way of writing helps explain the meaning of total derivative. 2/24/2019 Topic 5 NavierStokes Equations

13 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR We can also write 2/24/2019 Topic 5 NavierStokes Equations

14 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR where the operator can now be seen to be defined in the following manner. 2/24/2019 Topic 5 NavierStokes Equations

15 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR The operator in vector calculus is defined as which can be used to write the total derivative as 2/24/2019 Topic 5 NavierStokes Equations

16 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR Example: derivative of temperature, T 2/24/2019 Topic 5 NavierStokes Equations

17 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR A simpler way of writing the total derivative is as follows: 2/24/2019 Topic 5 NavierStokes Equations

18 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR The above equation shows that and have the same meaning, and the latter form is used simply to emphasize the physical meaning that it consists of the local derivative and the convective derivatives. Divergence of Velocity (What does it mean?) ( Section 2.4) Consider a control volume moving with the fluid. Its mass is fixed with respect to time. Its volume and surface change with time as it moves from one location to another. 2/24/2019 Topic 5 NavierStokes Equations

19 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR Insert Figure 2.4 2/24/2019 Topic 5 NavierStokes Equations

20 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR The volume swept by the elemental area dS during time interval Dt can be written as Note that, depending on the orientation of the surface element, Dv could be positive or negative. Dividing by Dt and letting gives the following expression. 2/24/2019 Topic 5 NavierStokes Equations

21 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR The LHS term is written as a total time derivative because the fluid element is moving with the flow and it would undergo both the local acceleration and the convective acceleration. The divergence theorem from vector calculus can now be used to transform the surface integral into a volume integral. 2/24/2019 Topic 5 NavierStokes Equations

22 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR If we now make the moving control volume shrink to an infinitesimal volume, dv, the above equation becomes When the volume integral can be replaced by on the RHS to get the following. The divergence of is the rate of change of volume per unit volume. 2/24/2019 Topic 5 NavierStokes Equations

23 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR 2/24/2019 Topic 5 NavierStokes Equations

24 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR Continuity Equation (2.5) Consider the CV fixed in space. Unlike the earlier case the shape and size of the CV are the same at all times. The conservation of mass can be stated as: Net rate of outflow of mass from CV through surface S = time rate of decrease of mass inside the CV Net rate of 2/24/2019 Topic 5 NavierStokes Equations

25 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR The net outflow of mass from the CV can be written as Note that dS by convention is always pointing outward. Therefore can be (+) or (-) depending on the directions of the velocity and the surface element. 2/24/2019 Topic 5 NavierStokes Equations

26 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR Total mass inside CV Time rate of increase of mass inside CV (correct this equation) Conservation of mass can now be used to write the following equation  See text for other ways of obtaining the same equation. 2/24/2019 Topic 5 NavierStokes Equations

27 Topic 5 NavierStokes Equations
Computational Fluid Dynamics (AE/ME 339) K. M. Isaac MAEEM Dept., UMR Integral form of the conservation of mass equation thus becomes 2/24/2019 Topic 5 NavierStokes Equations

Download ppt "Topic 5 NavierStokes Equations"

Similar presentations

Integration Relation for Control Volume

Integration Relation for Control Volume
Continuity Equation. Continuity Equation Continuity Equation Net outflow in x direction.

Continuity Equation. Continuity Equation Continuity Equation Net outflow in x direction.
Equations of Continuity

Equations of Continuity
AE/ME 339 Computational Fluid Dynamics (CFD) K. M. Isaac Professor of Aerospace Engineering.

AE/ME 339 Computational Fluid Dynamics (CFD) K. M. Isaac Professor of Aerospace Engineering.
1 MECH 221 FLUID MECHANICS (Fall 06/07) Tutorial 6 FLUID KINETMATICS.

1 MECH 221 FLUID MECHANICS (Fall 06/07) Tutorial 6 FLUID KINETMATICS.
CE 1501 CE 150 Fluid Mechanics G.A. Kallio Dept. of Mechanical Engineering, Mechatronic Engineering & Manufacturing Technology California State University,

CE 1501 CE 150 Fluid Mechanics G.A. Kallio Dept. of Mechanical Engineering, Mechatronic Engineering & Manufacturing Technology California State University,
Method to Use Conservations Laws in Fluid Flows…… P M V Subbarao Professor Mechanical Engineering Department I I T Delhi Mathematics of Reynolds Transport.

Method to Use Conservations Laws in Fluid Flows…… P M V Subbarao Professor Mechanical Engineering Department I I T Delhi Mathematics of Reynolds Transport.
Instructor: André Bakker

Instructor: André Bakker
ME 231 Thermofluid Mechanics I Navier-Stokes Equations.

ME 231 Thermofluid Mechanics I Navier-Stokes Equations.
Chapter 9: Differential Analysis of Fluid Flow SCHOOL OF BIOPROCESS ENGINEERING, UNIVERSITI MALAYSIA PERLIS.

Chapter 9: Differential Analysis of Fluid Flow SCHOOL OF BIOPROCESS ENGINEERING, UNIVERSITI MALAYSIA PERLIS.
Introduction to Fluid Mechanics

Introduction to Fluid Mechanics
Louisiana Tech University Ruston, LA 71272 Momentum Balance Steven A. Jones BIEN 501/CMEN 513 Monday, March 19, 2007.

Louisiana Tech University Ruston, LA Momentum Balance Steven A. Jones BIEN 501/CMEN 513 Monday, March 19, 2007.
A conservative FE-discretisation of the Navier-Stokes equation JASS 2005, St. Petersburg Thomas Satzger.

A conservative FE-discretisation of the Navier-Stokes equation JASS 2005, St. Petersburg Thomas Satzger.
ME 254. Chapter I Integral Relations for a Control Volume An engineering science like fluid dynamics rests on foundations comprising both theory and experiment.

ME 254. Chapter I Integral Relations for a Control Volume An engineering science like fluid dynamics rests on foundations comprising both theory and experiment.
1 MAE 5130: VISCOUS FLOWS Conservation of Mass September 2, 2010 Mechanical and Aerospace Engineering Department Florida Institute of Technology D. R.

1 MAE 5130: VISCOUS FLOWS Conservation of Mass September 2, 2010 Mechanical and Aerospace Engineering Department Florida Institute of Technology D. R.
Reynolds Transport Theorem We need to relate time derivative of a property of a system to rate of change of that property within a certain region (C.V.)

Reynolds Transport Theorem We need to relate time derivative of a property of a system to rate of change of that property within a certain region (C.V.)
Dr. R. Nagarajan Professor Dept of Chemical Engineering IIT Madras

Dr. R. Nagarajan Professor Dept of Chemical Engineering IIT Madras
Abj1 1.System, Surroundings, and Their Interaction 2.Classification of Systems: Identified Volume, Identified Mass, and Isolated System Questions of Interest:

Abj1 1.System, Surroundings, and Their Interaction 2.Classification of Systems: Identified Volume, Identified Mass, and Isolated System Questions of Interest:
Scalar-Vector Interaction in Animating but non-alive Fields …… P M V Subbarao Professor Mechanical Engineering Department I I T Delhi Special Vector Calculus.

Scalar-Vector Interaction in Animating but non-alive Fields …… P M V Subbarao Professor Mechanical Engineering Department I I T Delhi Special Vector Calculus.
A Mathematical Frame Work to Create Fluid Flow Devices…… P M V Subbarao Professor Mechanical Engineering Department I I T Delhi Development of Conservation.

A Mathematical Frame Work to Create Fluid Flow Devices…… P M V Subbarao Professor Mechanical Engineering Department I I T Delhi Development of Conservation.

Similar presentations

Ads by Google