1. Introduction to Electrical: Safety
Module 1

2. Always wear BW approved safety glasses in all production areas
PROTECTION FROM
Flying debris
Dust
Protruding objects
Chemicals

3. Always use caution while entering and exiting boat
Make sure stairways are secured and undamaged before entering boat
CONTACT GROUP LEAD OR SUPERVISIOR IMMEDIATELY IF A HAZARD EXISTS
Trip and fall hazards
Always use handrails for stability
Do not carry heavy loads up stairways, ask for help
Use cranes for heavy loads if certified

4. Always use caution while moving thru-out the boat
Multiple trip and fall hazards
Unsecured parts or components could create unsecure footing causing a potential fall hazard
Make sure hatches and guards are in place to eliminate fall hazards
Never work under an unsupported load, always use jack stands when working under loads is unavoidable

5. NEVER USE ANY TOOLS OR OVERHEAD CRANES THAT YOU ARE NOT CERTIFIED to use
You could cause serious injury to yourself or other team members
You could also cause damage to the boat you are working on or around

6. ALWAYS REPORT Potential SAFETY HAZARDS TO TEAM LEADER OR SUPERVISOR IMMEDIATELY
Avoid injury to yourself or your team members
Hazards left unreported could injure unsuspecting team members

7. Always use the proper tools for the task at hand
Not using the proper tool for the job could cause injury
Not using the proper tool for the job could cause damage to the component that you are working on or cause injury to yourself
Be aware of the effect of your actions on other nearby workers