Download presentation
Presentation is loading. Please wait.
1
6.02 Flight Controls References: FTGU pages 30-31
Theory of Flight 6.02 Flight Controls References: FTGU pages 30-31
2
6.02 Flight Controls MTPs: Axes of an Airplane Movements
Function of the Controls Flutter Balancing Controls
3
Review Label the airplane!
4
Review What kind of construction are these?
5
Review How would you describe these aircraft?
6
Review What do the following terms mean? Wingspan Chord Planform
Aspect Ratio Angle of Incidence Relative Airflow Angle of Attack Airfoil Camber
7
Axes of an Airplane
8
Movements
9
Movements Roll – movement around longitudinal axis
Pitch – movement around lateral axis Yaw – movement around vertical/normal axis
10
Function of the Controls
Ailerons cause movement around the longitudinal axis This movement is called roll.
11
Function of the Controls
Ailerons are controlled using the control column Control column RIGHT = right wing down Control column LEFT = left wing down
12
Function of the Controls
The elevator controls movement about the lateral axis This movement is called pitch.
13
Function of the Controls
Elevators are controlled using the control column Control column FORWARD = nose down Control column BACK =nose up
14
Function of the Controls
An alternative to the elevator is the stabilator It is controlled the same way the elevator is The entire horizontal stabilizer moves to act as an elevator
15
Function of the Controls
The rudder controls movement around the vertical axis. This movement is called yaw.
16
Function of the Controls
The rudder is controlled using the rudder pedals Right rudder pedal = yaw right Left rudder pedal = yaw left
17
Flutter What is flutter?
Rolling or weaving motion arising from deflection of a part of the airplane structure that causes the air forces on it to change in synchronism with its natural period of vibration Control surfaces must be balanced properly to prevent flutter!
18
Balancing Controls Balancing control surfaces to help pilots move them
Examples: Inset hinge balance Rudder horn Aileron hinge axes
19
Balancing Controls
20
Balancing Controls Addition of mass (usually made of lead) to control surfaces to prevent flutter Example: Lead mass added to rudder horn of glider
21
Balancing Controls A control surface has balance about it’s centre of gravity without airflow over it Improper weight distribution can cause flutter Static balance must be checked when control surface is repainted
22
Confirmation Draw and label the three aircraft axis.
Which movement occurs around each axis? Which control surface is used for each movement?
23
F-35B Hovering
Similar presentations
© 2024 SlidePlayer.com Inc.
All rights reserved.