1. Multi-Piece Rim Assembly Component Matching

2. DOT Identifications Found on weather side of each component
Stamped into components
Visually inspect each component to identify markings
Ensure component compatibility using markings found on components and OSHA wall chart

3. Example of Markings
I.D. Stampings

4. Review OSHA Wall Chart to Ensure Component Compatibility
Compatibility Information

5. If Mismatched Components Are Identified
Evacuate trajectory zones - - do not handle assembly
Immediately report to supervisor

6. Trajectory Zones

7. Supervisor Actions Ensure trajectory zones are evacuated
Barricade effected areas
Install temporary barriers
Contact tire specialist to mitigate and remove hazard