1. Sound set-up/ Power-up/ Tear Down (Strike)
Session Two:
Sound set-up/ Power-up/ Tear Down (Strike)

2. Set-up! *Make all connections before adding power
Mics/ inputs
Amp
Speakers
Power cable
Plug in all components to outlets
Power up
Turn on the amp(s) last
Set all levels

3. Tear Down (Strike)! In Reverse Order: Power down all equipment
Turn off Amp(s) first
Unplug all components from outlets
Disconnect all components
Mics/ inputs
Speakers
Amps
Etc.
Put everything away correctly
Wrap all cables loosely

4. Set-up/ Strike Review Make all connections before adding power.
Turn on the amps last.
Strike in reverse order.
Turn off the amps first.
Put everything away neatly and correctly.
Wrap all cables loosely.

5. Microphones/ Channels/ Sections of the Mixer
Session Three:
Microphones/ Channels/ Sections of the Mixer

6. Microphones:

7. Pick-up Patterns:
Uni-Directional (Cardioid)- Picks up sound from one direction
Bi-Directional- Picks up from two directions
Omni-Directional-Picks up in all directions

8. Channels: Input Section (Mic or Line) Gain EQ Hi Mid Lo FX Pan
Level (volume)
Monitor????
Etc.

9. Sections of the Mixer:
Channels- organization and mixing of the input devices.
Master- Control for the whole mixer.
Outputs- Interface out to the speakers/ monitors/ amps/ etc..