Presentation is loading. Please wait.

Presentation is loading. Please wait.

Active Directory Replication

Similar presentations


Presentation on theme: "Active Directory Replication"— Presentation transcript:

1 Active Directory Replication
2.3 Plan Active Directory Active Directory Replication TestOut Server Pro 2016: Identity

2 Section Skill Overview
Configure intersite replication. TestOut Server Pro 2016: Identity

3 Key Terms File Replication Service (FRS)
TestOut Server Pro 2016: Identity

4 Key Definitions Site Link Cost: A number assigned to a site link that identifies the overall relative cost of using that site link. The cost is used to select the optimal path between sites when more than one path exists. TestOut Server Pro 2016: Identity

5 Key Definitions File Replication Service (FRS): Used for replicating the Distributed File System folder (SYSVOL) for Microsoft Server preceding Windows Server 2008 R2. TestOut Server Pro 2016: Identity

6 Site Link Objects IP site links: SMTP site links:
Support all types of replication. Must allow RPC traffic through firewall to replicate. Are used in nearly all cases (99.9%). SMTP site links: Are used between sites without reliable, persistent links. Have several drawbacks: Only transfers schema, configuration, and application partition data. Do not transfer domain data. Require an Enterprise Certification Authority and an SMTP server at each end of the link. TestOut Server Pro 2016: Identity

7 Site Link Cost An arbitrary number used to favor faster connections.
Slower connections are avoided by using a higher cost number. Active Directory always chooses the least cumulative cost. TestOut Server Pro 2016: Identity

8 Replicating from Site A to Site D
TestOut Server Pro 2016: Identity

9 Site Link Cost Comparison
TestOut Server Pro 2016: Identity

10 Site Link Schedules Define when Active Directory replication can occur. May be set to avoid replication during peak traffic of limited bandwidth. TestOut Server Pro 2016: Identity

11 Site Link Schedules Define when Active Directory replication can occur. May be set to avoid replication during peak traffic of limited bandwidth. Should overlap between sites with no direct connections. TestOut Server Pro 2016: Identity

12 Site Link Schedule Overlap
TestOut Server Pro 2016: Identity

13 Site Link Frequency Determines how often to replicate Active Directory. Has a default value of 180 minutes (3 hours). Has a valid range of 15 to 10,080 minutes. Increases traffic and lowers latency if it is lowered. Decreases traffic and increases latency if it is increased. TestOut Server Pro 2016: Identity

14 Site Link Bridges TestOut Server Pro 2016: Identity

15 Site Link Bridges TestOut Server Pro 2016: Identity

16 Site Link Bridges TestOut Server Pro 2016: Identity

17 Replication Types – Intrasite
Replication between two or more domain controllers located in the same site. Completed by Knowledge Consistency Checker (KCC). Runs every 15 minutes by default. Chooses replication partners according to the rule of three. 1 2 3 Rule of Three TestOut Server Pro 2016: Identity

18 Replication Types – Intrasite
Replication between two or more domain controllers located in the same site. Completed by Knowledge Consistency Checker (KCC). Runs every 15 minutes by default. Chooses replication partners according to the rule of three. Creates automatic connection objects. Stops creating automatic connections if manual connection objects are created. TestOut Server Pro 2016: Identity

19 Replication Types – Intersite
Replication that occurs between sites. Replication occurs only between bridgehead servers. The ISTG selects the bridgehead servers. Updates between bridgehead servers use intersite. Updates from bridgehead servers to other domain controllers uses intrasite. Bridgehead server can be manually assigned. If manually assigned, ISTG will stop designating bridgehead servers for the site. If manually assigned, Microsoft suggests selecting at least two preferred bridgehead servers. Bridgehead Servers Site A Site B Intersite Intrasite TestOut Server Pro 2016: Identity

20 Viewing and Troubleshooting Replication
Repadmin can be used to: View the replication topology. Troubleshoot logon issues and replication problems. Force all domain controllers to replicate with all other domain controllers: repadmin /syncall Verify replication: repadmin /showrepl TestOut Server Pro 2016: Identity

21 SYSVOL Replication Facts
TestOut Server Pro 2016: Identity

22 SYSVOL Replication Facts
TestOut Server Pro 2016: Identity

23 In-Class Practice Do the following labs:
2.3.6 Configure Intersite Replication TestOut Server Pro 2016: Identity

24 Class Discussion During which migration stages are you able to roll back the migration? TestOut Server Pro 2016: Identity


Download ppt "Active Directory Replication"

Similar presentations


Ads by Google