Presentation is loading. Please wait.

Presentation is loading. Please wait.

RR-TAG Liaison Report IEEE

Similar presentations


Presentation on theme: "RR-TAG Liaison Report IEEE"— Presentation transcript:

1 RR-TAG Liaison Report IEEE 802.18 - 802.22
November 2007 doc.: IEEE /00xxr0 May 2008 RR-TAG Liaison Report IEEE Authors: Name Company Address Phone Peter Murray TMG, Inc. New Jersey >. Peter Murray, TMG, Inc. Peter Murray, TMG, Inc.

2 November 2007 doc.: IEEE /00xxr0 May 2008 IMT-Advanced Call for IMT-Advanced/Next Generation Networks Technology Proposals from IEEE 802 Working Groups See call-for-IMT-Advanced-technology-proposals.doc Peter Murray, TMG, Inc. Peter Murray, TMG, Inc.

3 November 2007 doc.: IEEE /00xxr0 May 2008 UWB IEEE L /030d1- Public consultation on Draft ECC Report 120 (“Technical requirements for UWB DAA (Detect And Avoid) devices to ensure the protection of radiolocation in the bands GHz and GHz and BWA terminals in the band GHz”) This document was approved by for transmission to the ECC Peter Murray, TMG, Inc. Peter Murray, TMG, Inc.

4 November 2007 doc.: IEEE /00xxr0 May 2008 Hearing Aids presentation was made on Hearing Aids by Starkey Laboratories Joel Solum on their need to have (a)(2) section modified by rule making. Currently there is a Waiver on this section for MHz. Peter Murray, TMG, Inc. Peter Murray, TMG, Inc.

5 60 GHz conference calls 802.19 April 2008
November 2007 doc.: IEEE /00xxr0 May 2008 60 GHz conference calls April 2008 Joel T. Johnson from IEEE Geoscience and Remote Sensing Society (FARS committee) and Ohio State University raised concern regarding potential for interference from 60 GHz 802 devices to passive microwave systems on earth observing satellites conducting meteorological observations In initial coexistence analysis he showed that the satellite can only tolerate one device per square kilometer transmitting with EIRP of 1 Watt Comments on the call included: Satellite measurement bandwidth is 100 MHz, where as c is ~2GHz. Difference in bandwidth needs to be accounted for Calculation assumed device on the ground pointing directly up to satellite, need to adjust for gain in the direction of the satellite Calculation assumed device on the ground has 100% duty cycle There was no account for attenuation from indoor to outdoor Whether this is a regulatory issue or standards issue Peter Murray, TMG, Inc. Peter Murray, TMG, Inc.

6 60 GHz conference calls 802.19 May 2008
November 2007 doc.: IEEE /00xxr0 May 2008 60 GHz conference calls May 2008 Minutes from the 2008 conference calls are contained in Follow up presentation on May 8th Corrected a significant equation error: satellite can tolerate 1000 devices per square kilometer transmitting with EIRP of 1 Watt Modified equations to include parameters for difference in bandwidth between transmitter and satellite passive receiver; tolerable density becomes 20000 expected transmit antenna properties as well as through wall-attenuation, roofing, scattering Peter Murray, TMG, Inc. Peter Murray, TMG, Inc.


Download ppt "RR-TAG Liaison Report IEEE"

Similar presentations


Ads by Google