1. Unit 6 #2.3
Engineering/CAD

2. Engineering/CAD
1. List two international accepted standards.

3. 2. Engineering/CAD
2. List 9 types of lines, and create examples of these line using a drawing program…

4. 3. Engineering/CAD
3. Define the following terms commonly used for engineering components: “Housing,” “Bearing,” “Boss,” “Curved Slot,” “Rib,” “Fillet,” “Key,” “Key Way,” “Tee Groove.” and “Flat.”

5. 4. Engineering/CAD
4. Explain what a split cotter pin is used for.

6. 5. Engineering/CAD
5. Explain what a cotter pin is used for.

7. 6. Engineering/CAD
6. Describe what a dowel pin and taper pin does.

8. 7. Engineering/CAD
7. List 5 features relating to components turned on a lathe.

9. 8. Engineering/CAD
8. Define the following types of holes: drilled, reamed, counterbore, countersunk & spotface.

10. 9. Engineering/CAD
9. Explain how the following threads are created: Female thread-through, Female thread-blind & Male thread.

11. 10. Engineering/CAD
10. List and describe two types of springs.

12. 11. Engineering/CAD
11. List and describe two types of Knurling.

13. 12. Engineering/CAD
12. List 4 types of bearings.

14. 13. Engineering/CAD
13. List and describe three types of gears.

15. 14. Engineering/CAD
14. List and define three types of shaft ends.

16. 15. Engineering/CAD
15. List and define two types of belt drives.