Presentation is loading. Please wait.

Presentation is loading. Please wait.

ECE 477 Final Presentation Team 4  Fall 2010

Similar presentations


Presentation on theme: "ECE 477 Final Presentation Team 4  Fall 2010"— Presentation transcript:

1 ECE 477 Final Presentation Team 4  Fall 2010
Mike Williams Chris Cadwallader Andrew Sydelko Craig Pilcher

2 Outline Project overview Block diagram Design challenges
Individual contributions Project demonstration Questions / discussion

3 Project Overview A child safety-system that prevents parents and caretakers from accidentally leaving children in vehicles. Average number of U.S. child hyperthermia fatalities per year since 1998: 37 49 so far in 2010 alone (8 since start of project) Goal is to prevent as many deaths as possible System tracks presence of children in safety seats and can control the car’s systems to save the child’s life

4 Statistics Source: http://ggweather.com/heat/
“Hyperthermia Deaths of Children in Vehicles”

5 Car Side Block Diagram

6 Child Side Block Diagram

7 Design Challenges Detection of vehicle state varies widely across car models from 1996 to 2010. SWCAN, J1850, ISO9141, etc. supported Required simultaneous CAN control, audio playback, vehicle state detection, and wireless monitoring Control of vehicle depends on imitation of internal components and keyfob Non-linear memory layout

8 Individual Contributions
Team Leader – Mike Williams Team Member 2 – Chris Cadwallader Team Member 3 – Craig Pilcher Team Member 4 – Andrew Sydelko

9 Team Leader – Mike Williams
Board and Software Design Initial Component Selection and Schematic Soldering (poorly)

10 Team Leader – Mike Williams

11 Member 2 - Chris Cadawallader
Software Design Drivers CAN communication Child side detection State Machine Verification

12 Member 3 - Craig Pilcher Software Design Organization Development
Debugging Audio, CAN fxns Component Selection

13 Member 4 - Andrew Sydelko
Software/hardware troubleshooting PWM audio, FLASH access from CodeWarrior Packaging design and implementation Software design

14 Project Demonstration
An ability to determine the operating state of the vehicle via the OBD-II port.  An ability to determine the presence of a child in a safety seat.  An ability to use multiple safety seats in one vehicle.  An ability to sound an audible alarm when the ignition is turned off.  An ability to interface directly to the internal vehicle CAN.

15 Movie

16 Questions / Discussion


Download ppt "ECE 477 Final Presentation Team 4  Fall 2010"

Similar presentations


Ads by Google