1. Automatic Single Sided Test Sequence of ELQ 30A+
ELQ 30A+ provides single sided test sequences to estimate the data transfer capacity of the tested lines used for different xDSL systems without the aid of far end device or a second operator.
Numerous test parameter sets are pre-programmed containing:
■ Tolerance masks for Loss, LCL, Return Loss, Impedance measurement
■ Principal system parameters for VDSL2, VDSL1, ADSL2 +, ADSL, ADSL G LITE
READSL2, ADSL G LITE, ADSL G.LITE2, SHDSL, HDSL, ISDN systems.
Using the pre-programmed test parameters ELQ 30A+ provides immediate PASS/FAIL qualification and detailed information about the reasons of failure.
After selecting the cable type and xDSL system ELQ 30A+ launches an automatic test sequence performing unilateral measurements
Selectable xDSL Systems
Selectable Test Programs
Results of the Automatic test
To learn more click on the selected topic!
ELEKTR NIKA

2. Selectable xDSL Systems
ELEKTR NIKA

3. Selectable Test Programs
Short Program means
measurement of:
■ Loss
■ Noise
Notice:
Loss and Noise measurements
are mandatory for data transfer speed calculation
Long Program means
measurement of:
■ Loss
■ Noise
■ Return Loss
■ Impedance
■ Balance
Free Program means:
Any combination
of measurements
ELEKTR NIKA

4. Detailed Results of VDSL and ADSL Qualification
ELEKTR NIKA

5. THANK YOU FOR YOUR ATTENTION!