Presentation is loading. Please wait.

Presentation is loading. Please wait.

Jib Transfer Bench The Concept: Create a bench that assists a paraplegic in trimming the jib sail How: make the transition from port to starboard easier.

Similar presentations


Presentation on theme: "Jib Transfer Bench The Concept: Create a bench that assists a paraplegic in trimming the jib sail How: make the transition from port to starboard easier."— Presentation transcript:

1 Jib Transfer Bench The Concept: Create a bench that assists a paraplegic in trimming the jib sail How: make the transition from port to starboard easier – less force, less time

2 Customer Needs and Problems
Importance Description CN1 1 Make it easier (require less force) for the jib trimmer to get from port to starboard CN2 2 Make it take less time for the jib trimmer to get from port to starboard given they have no use of their legs and limited to no core strength CN3 light weight CN4 3 eliminate the need for the person to make contact with the "floor" of the boat CN5 Provide access to jib lines CN6 Mechanical solution CN7 easy to use CN8 provide support for legs and core CN9 Easy to install CN10 Adjustable to different boats CN11 Move between port and starboard CN12 Corrosion resistant Areas of difficulty Mounting the system to the boat with minimal modification to the boats hull. Finding light weight materials that are not infeasible due to cost.

3 Preliminary Metrics

4 Potential/Existing solutions
Track system between seats Magnus Liljedahl from Team Paradise has a swiveling lazy Susan design. This puts the point of rotation in the center of the floor. There is a lever arm that goes out from the lazy susan at an angle to avoid contact with the bench seats in the boat. The lever arm is designed to put the seat on, therefore it holds the weight of the person and the seat. There is molded leg support on top of the lazy susan, in front of the lever arm. Straps hold the persons legs in place. Both the seat attached, and the leg support, are made of molded carbon fiber. A harness can be incorporated in the seat to provide additional core support. Original design would need modification for incorporation in boats other than a Sonar. Magnus Liljedahl’s lazy Susan design. Primarily made of marine plywood and molded carbon fiber. $

5 Type & Amount of Support Committed
Finance Name/Organization Contact Info. Type & Amount of Support Committed RIT TBD NSF RAPD grant The seat components of Richard Ramos’ chair came to $


Download ppt "Jib Transfer Bench The Concept: Create a bench that assists a paraplegic in trimming the jib sail How: make the transition from port to starboard easier."

Similar presentations


Ads by Google