1. Electrical System P09045: Membrane Characterization Test Stand
1/2/2019

2. Current System The current code is in two programs
One program to control the motor driver
One program to measure the displacement and the force
Both were created by John Wellin
P09045: Membrane Characterization Test Stand
1/2/2019

3. Load Cell Program Front Panel
P09045: Membrane Characterization Test Stand
1/2/2019

4. Load Cell Program Block Diagram
P09045: Membrane Characterization Test Stand
1/2/2019

5. Motor Controller Front Panel
P09045: Membrane Characterization Test Stand
1/2/2019

6. Motor Controller Block Diagram
P09045: Membrane Characterization Test Stand
1/2/2019

7. Proposed Changes Remove encoder input Add second load cell input
Add camera trigger (TTL) output
If trigger does not work, may simply measure sync out signal from camera
Manually synchronize images with data
P09045: Membrane Characterization Test Stand
1/2/2019