1. AP Physics Chapter 6 Momentum and Collisions

2. Chapter 6: Momentum and Collisions
6.1 Linear Momentum 6.2 Impulse 6.3 The Conservation of Linear Momentum 6.4 Elastic and Inelastic Collisions Not Covered

3. Homework for Chapter 6 Read Chapter 6
HW 6.A : p. 203: 3, 6, 7, 10, 11, 13, 18, 26, 29, 31, 33, 34, 35.
HW 6.B: p. 205: 38, 40, 41, 43-46, 49. p.206: 54-56, 62, 65, 66.

4. 6.1 Linear Momentum 6.2 Impulse

5. Loosen Up! II
Physics Daily WarmUps # 91
Impulse is found by multiplying the force acting on an object by the amount of time the force acts. The amount of impulse that an object experiences is equal to the amount that its momentum changes. This means that the same change in momentum can be accomplished by exerting a large force for a short amount of time or a small force for a longer amount of time. Seat belts are designed to give a little when they are properly fastened. If not, they would not work as well at keeping you from injury in an accident or sudden stop. Use the concept of impulse equaling the change in momentum to explain why they need to give.
Solution: The time to bring a person to stop is increased, thereby decreasing the force exerted on the person by the belt.

6. 6.1 Linear Momentum

7. 6.1 Linear Momentum i The SI unit of momentum is the kg∙m/s.
The total linear momentum of a system is the vector sum of the momenta of the individual particles.
P = p1 + p2 + p3 + … = ∑ pi i

8. 6.1 Linear Momentum Example 6.1: Which has more linear momentum:
a) a 1500 kg car moving at 25.0 m/s or
b) a 40,000 kg truck moving at 1.00 m/s?

9. 6.1 Linear Momentum
Example 6.2: Two identical 1500 kg cars are moving perpendicular to each other. One moves with a speed of 25.0 m/s due north and the other moves at 15.0 m/s due east. What is the total linear momentum of the system?

10. 6.1 Linear Momentum: Check for Understanding

11. 6.1 Linear Momentum: Check for Understanding

12. 6.1 Linear Momentum: Check for Understanding

13. 6.1 Linear Momentum: Check for Understanding

14. 6.2 Impulse J J

15. 6.2 Impulse
● In fact, Newton used the momentum form of his second law when he first started formatting the law. J
● For a system in which mass is not a constant, such as rocket propulsion, the momentum form should be used.

16. 6.2 Impulse
Example 6.3: A 0.10 kg ball is dropped onto a table top. The speeds of the ball right before hitting the table top and right after hitting the table top are 5.0 m/s and 4.0 m/s respectively. If the collision between the ball and the tabletop lasts 0.15 s, what is the average force exerted on the ball by the table top?

17. Change in momentum
The change in momentum is given by the difference in momentum vectors.
a) Here the vector sum is zero, but the difference, or change in momentum, is not.
b) The change in momentum is found by computing the change in the components.
Fig. 6.3 in text, p. 177

18. 6.2 Impulse: Check for Understanding1.

19. 6.2 Impulse: Check for Understanding

20. 6.2 Impulse: Check for Understanding2.

21. 6.2 Impulse: Check for Understanding
Answer: b J

22. 6.2 Impulse: Check for Understanding3.

23. 6.2 Impulse: Check for UnderstandingJ

24. Homework for Sections 6.1 & 6.2
HW 6.A : p. 203: 3, 6, 7, 10, 11, 13, 18, 19, 22, 26, 29, 31, 33, 34, 35.

25. 6. 3 The Conservation of Linear Momentum 6
6.3 The Conservation of Linear Momentum 6.4 Elastic and Inelastic Collisions

26. Collision Conservation
Physics Daily WarmUps # 97
Momentum is always conserved in any collision, as is energy. However, energy usually transformed into several different types as a result of the collision. In most collisions, a significant amount of the kinetic energy is converted into other forms, and the colliding objects’ movements are greatly affected. These are called inelastic collisions. There are some collisions, like the colliding steel balls suspended by strings in a Newton’s Cradle, in which kinetic energy is almost conserved. Since so little energy is lost in each collision, they seem to just go on bouncing. These collisions represent elastic collisions. Elastic collisions always seem to catch our attention. Because they are so rare, they seem unusual to us. Write down a personal experience where you witnessed an elastic collision.

27. 6.3 The Conservation of Linear Momentum

28. 6.3 The Conservation of Linear Momentum

29. Momentum is conserved in an isolated system
Momentum is conserved in an isolated system. The motion in two dimensions may be analyzed in terms of the components of momentum, which is also conserved.
If m1 and m2 are equal, they will split apart at a 90 degree angle.

30. Conservation of Momentum
Before the rifle is fired, the total momentum of the rifle and the bullet is zero.
During firing, there are equal and opposite internal forces, and the instantaneous total momentum of the rifle-bullet system remains zero.
When the bullet leaves the barrel, the total momentum of the system is still zero.

31. 6.3 The Conservation of Linear Momentum
Example 6.4: A 50 kg pitching machine (excluding the baseball) is placed on a frozen pond. The machine fires a 0.40 kg baseball with a speed of 35 m/s in the horizontal direction. What is the recoil velocity of the pitching machine? (Assume negligible friction.)

32. 6.3 The Conservation of Linear Momentum
Example 6.5: A 10 gram bullet moving at 300 m/s is fired into a 1.0 kg block. The bullet emerges (does not stay embedded in the block) with half of its original speed. What is the velocity of the block right after the collision?

33. 6.3 The Conservation of Linear Momentum: Check for Understanding

34. 6.3 The Conservation of Linear Momentum: Check for Understanding

35. 6.3 The Conservation of Linear Momentum: Check for Understanding

36. 6.3 The Conservation of Linear Momentum: Check for Understanding

37. 6.4 Elastic and Inelastic Collisions

38. 6.4 Elastic and Inelastic Collisions

39. 6.4 Elastic and Inelastic Collisions

40. 6.4 Elastic and Inelastic Collisions

41. 6.4 Elastic and Inelastic Collisions
• In inelastic collisions, momentum is conserved but kinetic energy is not.
• Collisions like the ones shown here, in which the objects stick together , are called completely inelastic collisions.
• The maximum amount of kinetic energy lost is consistent with the conservation of momentum.
6.4 Elastic and Inelastic Collisions

42. 6.4 Elastic and Inelastic Collisions
Example 6.6: While standing on skates on a frozen pond, a student of mass 70.0 kg catches a 2.00 kg ball travelling horizontally at 15.0 m/s toward him.
What is the speed of the student and the ball immediately after he catches it?
How much kinetic energy is lost in the process?

43. 6.4 Elastic and Inelastic Collisions
Example 6.7: A rubber ball with a speed of 5.0 m/s collides head on elastically with an identical ball at rest. Find the velocity of each object after the collision.

44. 6.4 Elastic and Inelastic Collisions: Check for Understanding

45. 6.4 Elastic and Inelastic Collisions: Check for Understanding

46. 6.4 Elastic and Inelastic Collisions: Check for Understanding

47. 6.4 Elastic and Inelastic Collisions: Check for Understanding

48. 6.4 Elastic and Inelastic Collisions: Check for Understanding

49. 6.4 Elastic and Inelastic Collisions: Check for Understanding

50. 6.4 Elastic and Inelastic Collisions: Check for Understanding
(Hint: See Special Case b)

51. 6.4 Elastic and Inelastic Collisions: Check for Understanding

52. 6.4 Elastic and Inelastic Collisions: Check for Understanding

53. 6.4 Elastic and Inelastic Collisions

54. Homework for Sections 6.3 & 6.4
HW 6.B: p. 205: 38, 40, 41, 43-46, 49. p.206: 54-56, 62, 65, 66.