1. Light
Reflection – the “bouncing” of light off of a surface. The light does not pass through the surface (called a medium),
Refraction – is the “bending of light as it passes from one medium to another
Dispersion – is the “splitting” of light into it various colours and
Absorption – is the complete transmission of light into a medium (the light enters but does not exit)

2. Reflection
One law of reflection is that the incident ray, the reflected ray and the normal all lie in the same plane

3. Reflection
Another law of reflection is that the angle of incidence is equal to the angle of reflection. For example if the incident ray “hits” the mirror at 45°, then the reflected ray bounces off the mirror at a 45° angle. (° - this is the degree symbol)

4. Reflection An image formed in a (plane) mirror is
not real (it is called Virtual)
It is the same distance it is from the front of the mirror as the back of the mirror
It is upright

5. Curved mirrors
Convex mirrors – parallel incident rays are spread out after reflection…divergent . So this can be used for making rear view mirrors
Concave mirrors – parallel incident rays are to more than one focus after reflection…converge

6. The diagram presented below in Figure 4 illustrates the reflection patterns obtained from both concave and convex mirrors. The concave mirror on the left has a reflecting surface that curves inwards that resembles a portion of the interior of a sphere. When light rays that are parallel to the principal, or optical axis, reflect from the surface of a concave mirror, in this case, the rays leading from the soldier's hat and feet, they converge on the focal point in front of the mirror. The distance from the reflecting surface to the focal point is termed the mirror's focal length. The size of the image depends upon the distance of the object from the mirror and it's position with respect to the mirror's surface. In this case, the soldier is placed at the center of curvature and the reflected image is upside down and in front of the mirror's center of curvature.
The convex mirror on the right-hand side of Figure 4, however, has a reflecting surface that curves outward, which resembles a portion of the exterior of a sphere. Light rays parallel to the optical or principal axis are reflected from the surface in a manner that diverges from a focal point that is behind the mirror. Images formed with convex mirrors are always right side up and reduced in size. These images are also termed virtual images because when they occur reflected rays appear to diverge from a focal point behind the mirror.

7. Characteristics of an image
Virtual image – cannot be produced on a screen
Real image – can be produced on a screen
Image distance (v) is equal to object distance (u)
Image has the same size as the object (magnification= 1)
Image is erect/laterally inverted with respect to the object