1. API RP 16AS June 2017
Recommended Practice for Integration of Subsea BOP Equipment Systems for Drilling Wells – Update

2. GOAL:
Develop a schematic of the systems in the 16AS scope to identify other specifications that already sufficiently cover sections
1220 L Street, NW • Washington, DC •

3. First Meeting Summary:
Which API documents will be included or not included?
Stay with Drilling, not CWO operations at this point
Capping Stack interface must be considered
Start generally with S53 scope and look at delineations
Included
Not Include
Interface
16A, 16C, 16D, 16F, 16Q, Q1, MPD, 7K, 8C, S53, S64
16B, 16 ST, RP 59
17W, 17G
1220 L Street, NW • Washington, DC •

4. First Meeting Summary:
Acknowledged that some things can’t be done until systems are integrated in the field
Should cathodic protection for subsea be included?
Should bolting be included?
Should stainless in subsea application and coatings be included?
What else is missing?
1220 L Street, NW • Washington, DC •

5. First Meeting Notes: Reviewed the S53 Scope
Do we target BOP Stack first and then expand to the rest of the system?
WG agreed yes, otherwise the scope will become broad and difficult to manage
The workgroup agreed to start at Wellhead Connector, “build stack” conceptually, and see what the gaps are for the system
Given the expertise in the room, it was decided to begin with a subsea stack
1220 L Street, NW • Washington, DC •

6. Path Forward:
Perform Gap Analysis for a Subsea Stack from the wellhead up
This will be put into Excel Spreadsheet which identifies API document which applies and develop a gap matrix
Next meeting: Wednesday, July 12, 2017
1220 L Street, NW • Washington, DC •