Presentation is loading. Please wait.

Presentation is loading. Please wait.

Current Development State at Samsung Electro-Mechanics

Similar presentations


Presentation on theme: "Current Development State at Samsung Electro-Mechanics"— Presentation transcript:

1 Current Development State at Samsung Electro-Mechanics
B l u e t o o t h Current Development State at Samsung Electro-Mechanics Nov., 17, 2000

2 Contents Bluetooth in SEM Bluetooth Target Specification
Latest Output of SEM’s Bluetooth Characteristics of SEM’s Bluetooth Technical Datasheet 1.General ; 2.Schematic ; 3.RF Block ; 4.BB Block ; 5.Radio ; 6.BaseBand ; 7.Etc Bluetooth H/W Roadmap Bluetooth S/W Roadmap Appendix RF Test Conditions Radio Frequency Tolerance Tx Power RF Carrier Modulation In-Band Spurious Emissions Out-of-Band Spurious Emissions Receiver Sensitivity Interference Performance Out-of-Band Blocking Intermodulation Characteristics

3 Bluetooth in SEM Preparing SEM’s own competitive RF modules to meet the customers’ needs such as high speed wireless goods and personal area network environment (e.g : between PC to PDA) from April, 2000. SEM has already started to participate in the upcoming and blooming the wireless technology, Bluetooth and planned to launch the manufacturing by the 1st half of 2001.

4 Bluetooth Target Specification
Rx sensitivity Typ. : -80 dBm (Spec. : -70 <= 0.1% BER Tx power Class 1(+20 dBm), Class 2(+4 dBm), Class 3(+0dBm) Size 30 x 16 x 3(with BB) , 16 x 13 x 2.4(without BB) on MLB Software Protocol Stacks : HCI, L2CAP, SDP, RFCOMM, ME Application API: Dialup Networking, Headset, etc Together with SEM’s strategic partners. Others Bluetooth V1.0B spec. has been satisfied and FCC, ETSI will be

5 Latest Output of SEM’s Bluetooth
MAIN SPEC. Freq. Band : 2.402GHz ~ 2.480GHz (2.4GHz ISM) Data Rate : 1Mbps Coverage : 10 m (optional 100M) RF Power : 1 mW (optional 100mW) SS Type : FHSS (1600 Hop/s, 3200 Inquiry&Page states) Current : Average 60mA Dimension : 30 x 16 x 3 mm MAIN FUNCTIONS Coverage : Min. -70dBm (Max. 120m w/ HV1 packet) Rx sensitivity : Typical <= 0.1% BER Piconet Available(1 Master with up to 7 Slaves) FEATURES Near Zero IF VCO Embedded ACL/SCO Packets Supported External EEPROM & Flash ROM UART, PCM Interface

6 Characteristics of SEM’s Bluetooth
Fewer RF External Components No IF SAW Filter(Near Zero IF  1MHz) Fully Integrated Frequency Synthesizer with Internal VCO Size : 16 ×13 ×2.4mm(w/out BaseBand Chip) Baseband ACL & SCO Packets Supported UART(~430kbps) & PCM Supported Size : 30 ×16 × 3mm(w/ BB Chip) Firmware & Application API Firmware(Security Available, Hold Mode Supported) Protocol Stacks (HCI, L2CAP, SDP, RFCOMM, ME) Application API (Dial-up Networking, Ultimate Headset, Vcard, etc)

7 Technical Datasheet (1. General)
Class 3, +0 dBm Output Power Built-in Shielding 70dB Limiter and RSSI Dynamic Range Power Supply Range of 3.0V to 3.6V w/ Typ. 65 mA Frequency Adjustment of X-tal Osc. via HCI No Need for a Modulator Input ; BB signal is generated internally) Multiple Interface for Different Applications ; UART, PCM, USB(Ext. Circuitry Needed)

8 Technical Datasheet (2. Schematic)

9 Technical Datasheet (3. RF Block)

10 Technical Datasheet (4. BB Block)

11 Technical Datasheet (5. Radio - a)
Features Bluetooth Spec. SEM Performances Operating Frequency Range 2402~2480MHz Channel Bandwidth 1MHz Unwanted Emission FCC , , Modulation GFSK, BT=0.5, Fd=160kHz Duplex Type TDD Channel Switching Time 220us Tx Power Level +0dBm Frequency Accuracy 75kHz Tx Spectrum Shape ACP –25dBc Tx Ramp Periods 30us Locking Time Rx Sensitivity -70dBm Typ. –80dBm Input Signal Range -20dBm TBD Co-Channel < 11dB Rx Radiation < |-47dBm|

12 Technical Datasheet (5. Radio - b)
Output Power Flatness Channel Frequency[MHz] Power[dBm] #01 2402 -0.87 #09 2410 0.30 #19 2420 0.63 #29 2430 -0.03 #39 2440 -1.87 #49 2450 -2.70 #59 2460 -3.37 #69 2470 #79 2480 -2.03

13 Technical Datasheet (5. Radio - c)
Output Power Sample No. Output Level [dBm] Ch. #01 Ch. #45 Ch. #79 1 0.0 -2.2 -1.5 2 -0.4 -2.5 3 -1.7 -0.9 4 -2.7 -2.0 5 -1.0 -2.9 6 -0.5 -3.2 7 -1.9 8 9 -1.4 -2.4 10 -0.7

14 Technical Datasheet (6. BaseBand - a)
Usage Packet Type Available? Link Control ID O NULL POLL FHS DM1 ACL DH1 DM3 DH3 DM5 DH5 AUX1 Not yet SCO HV1 HV2 HV3 DV Available Packets

15 Technical Datasheet (7. Etc)

16

17

18 RF Test Conditions Appendix

19 Radio Frequency Tolerance(1)
Appendix

20 Radio Frequency Tolerance(2)
Appendix

21 Radio Frequency Tolerance(3)
Appendix

22 T x P o w e r Appendix

23 RF Carrier Modulation Appendix

24 In-Band Spurious Emissions
Appendix

25 Out-of-Band Spurious Emissions
Appendix

26 Receiver Sensitivity Appendix

27 Interference Performance
Appendix

28 Out-of-Band Blocking Appendix

29 Intermodulation Characteristics
Appendix


Download ppt "Current Development State at Samsung Electro-Mechanics"

Similar presentations


Ads by Google