1. Explosions and Explosives
Discussion
Explosions and Explosives

2. Explosions and Explosives
An explosion is a chemical or mechanical action caused by combustion, accompanied by creation of heat and rapid expansion of gases.
The distinguishing characteristic of an explosion is the rapid rate of reaction.
The sudden buildup of expanding gas pressure at the origin of the explosion produces the violent physical disruption of the surrounding environment.

3. Explosions and Explosives
Explosives are substances that undergo a rapid exothermic oxidation reaction, producing large quantities of gases.
This sudden buildup of gas pressure constitutes an explosion.
Detonation occurs so rapidly that oxygen in the air cannot participate in the reaction, so many explosives must have their own source of oxygen.

4. Explosions and Explosives
Detonation refers to the creation of a supersonic shock wave within the explosive charge.
This shock wave breaks the chemical bonds of the explosive charge, leading to the instantaneous buildup of heat and gases.

5. Low Explosives
Low Explosives decompose relatively slowly at rates up to 3000 ft/sec.
Examples include black powder, smokeless powder, and gas-air mixtures.
The only ingredients required for a low explosive is fuel and a good oxidizing agent.

6. High Explosives
High Explosives decompose very rapidly at rates from fps to over fps.
Examples include dynamite, TNT, PETN, and RDX.
There are two groups: primary and secondary.

7. Primary High Explosives
Primary High Explosives are very sensitive to heat, shock or friction, and normally detonate violently instead of burning.
They are used to detonate other explosives and are referred to as “primers.”

8. Secondary High Explosives
Secondary High Explosives are relatively insensitive to heat, shock or friction, and normally burn rather than detonate in small quantities in open air.
These are the high explosives used in commercial and military blasting.