1. FlySpy Packaging Consideration
Jeremy Tillman
William Ehlhardt
Heather Barrett
Daeho Hong

2. Consideration
Every component should not ruin the balance of the air plane
Main PCB circuit board should be smaller than 1.5” * 5” * 1”
Camera and Ultrasonic Range Finder will only attached outside of the fuselage

3. Component
Range Finder sensor and camera will be placed under the plane body and connected to the board via cables
Tri-Axis Accelerometer, pressure sensor, and Gyro sensor will be on the board with microcontroller and micro SD.
GPS, RF-receiver, and Servos will be connected to the microcontroller via cables.
PIC
Gyro Sensor
Tri-Axis
Accelerometer
Pressure Sensor
Micro SD 5” 1”
Cables to Camera
Cables to GPS
Cables to RF-Receiver
Cables to Servos
Cables to Range Finder

4. Similar Products Micro Pilot Kestrel Autopilot
Weight: 28grams
Size: 4” * 1.5”
Price: $2,000
Kestrel Autopilot
Weight: grams
Size: 2” x 1.37” x .47”
Price: $5,000
Our System costs about $300