Presentation is loading. Please wait.

Presentation is loading. Please wait.

Mask fit process. Mask fit process. The mask fit process begins with 3-dimensional surface images of the subject's face (A). Three-dimensional scans are.

Published byDeddy Kusuma Modified over 5 years ago

Similar presentations

Presentation on theme: "Mask fit process. Mask fit process. The mask fit process begins with 3-dimensional surface images of the subject's face (A). Three-dimensional scans are."— Presentation transcript:

1 Mask fit process. Mask fit process. The mask fit process begins with 3-dimensional surface images of the subject's face (A). Three-dimensional scans are obtained of noninvasive mask types and sizes. Using the software (3dMD Vultus), the images are rotated, aligned (B), and registered to achieve contact between face and mask (C). Panel D shows a top down view of the mask fitted to the face. Portions of the mask come through the face to achieve fit, indicating that the mask pushes into the face. Marty O Visscher et al. Respir Care 2015;60: (c) 2012 by Daedalus Enterprises, Inc.

Download ppt "Mask fit process. Mask fit process. The mask fit process begins with 3-dimensional surface images of the subject's face (A). Three-dimensional scans are."

Similar presentations

Effect of nasal positive expiratory pressure (PEP) on 6-min walk test (6MWT) distance and pre- to post-exercise increase in lung volumes in each individual.

Effect of nasal positive expiratory pressure (PEP) on 6-min walk test (6MWT) distance and pre- to post-exercise increase in lung volumes in each individual.
The changes in peak flow and inspiratory time between a minimum rise time (first 2 breaths) and a maximum rise time (last 2 breaths), with the Servo-i.

The changes in peak flow and inspiratory time between a minimum rise time (first 2 breaths) and a maximum rise time (last 2 breaths), with the Servo-i.
Relationship between the recruited volume and the arithmetic mean of the ratios of lung density at PEEP 15 cm H2O to lung density at PEEP 5 cm H2O (μP15/P5)

Relationship between the recruited volume and the arithmetic mean of the ratios of lung density at PEEP 15 cm H2O to lung density at PEEP 5 cm H2O (μP15/P5)
Spearman rank correlation between absolute humidity and the patient's core temperature with the Humid-Heat device. Spearman rank correlation between absolute.

Spearman rank correlation between absolute humidity and the patient's core temperature with the Humid-Heat device. Spearman rank correlation between absolute.
Representative images of 5 subjects are shown.

Representative images of 5 subjects are shown.
Matrix used to calculate the kappa statistic.

Matrix used to calculate the kappa statistic.
Trigger delays and leaks.

Trigger delays and leaks.
Picture of bubble PEP devices.

Picture of bubble PEP devices.
Noninvasive ventilation-neurally adjusted ventilatory assist (NIV-NAVA) where each patient effort is captured but support is insufficient (maximum electrical.

Noninvasive ventilation-neurally adjusted ventilatory assist (NIV-NAVA) where each patient effort is captured but support is insufficient (maximum electrical.
Differences in the distribution of lung densities in a patient with ARDS on a computed tomography scan between supine position (top) and prone position.

Differences in the distribution of lung densities in a patient with ARDS on a computed tomography scan between supine position (top) and prone position.
A 13-month-old subject had a deep tissue injury on the nose bridge when a nasal mask was used as a full face mask. A 13-month-old subject had a deep tissue.

A 13-month-old subject had a deep tissue injury on the nose bridge when a nasal mask was used as a full face mask. A 13-month-old subject had a deep tissue.
A: Computed tomogram shows bilateral dependent consolidation in a patient with ARDS, as well as ground-glass opacities in the non-dependent lung. A: Computed.

A: Computed tomogram shows bilateral dependent consolidation in a patient with ARDS, as well as ground-glass opacities in the non-dependent lung. A: Computed.
A: The Parker Flex-Tip tube (left) has a flexible tip pointing toward the center of the distal lumen. A: The Parker Flex-Tip tube (left) has a flexible.

A: The Parker Flex-Tip tube (left) has a flexible tip pointing toward the center of the distal lumen. A: The Parker Flex-Tip tube (left) has a flexible.
Indications for ventilation in adults

Indications for ventilation in adults
Sensitivity, Specificity, Positive Predictive Value, Negative Predictive Value, Area Under the Curve, and 95% CIs for the 0, 10, 25, 50, and 100 SatSeconds.

Sensitivity, Specificity, Positive Predictive Value, Negative Predictive Value, Area Under the Curve, and 95% CIs for the 0, 10, 25, 50, and 100 SatSeconds.
Comparison of airway pressure release ventilation (APRV) (blue curve) and biphasic positive airway pressure (BIPAP) (black curve). Comparison of airway.

Comparison of airway pressure release ventilation (APRV) (blue curve) and biphasic positive airway pressure (BIPAP) (black curve). Comparison of airway.
Trigger and synchronization windows.

Trigger and synchronization windows.
Whisker plot of expiratory pressure-time product: Direct comparison of expiratory pressure-time product (PTPEXP) in face mask versus helmet in all tested.

Whisker plot of expiratory pressure-time product: Direct comparison of expiratory pressure-time product (PTPEXP) in face mask versus helmet in all tested.
Typical pressure-time curves during forced expiration against an occluded airway in cystic fibrosis (CF) patients and healthy controls. Typical pressure-time.

Typical pressure-time curves during forced expiration against an occluded airway in cystic fibrosis (CF) patients and healthy controls. Typical pressure-time.
Top: Stress index (SI) in a patient early in the course of ARDS

Top: Stress index (SI) in a patient early in the course of ARDS

Similar presentations

Ads by Google