1. Structural Drafting
Assignment S-3

2. Part Plan
Dimensions
Beam designations
End reactions
Title and Scale

3. Connection Detail Beam designations Center to Center dimension
Gage outstanding leg (GOL) dimension
Hole spacing dimension
Assembly clearance dimension (C)
Setback dimension (1/2”)
Edge distance dimension for 3/4” diameter
fastener
Title and Scale

4. Shop Drawing (W12 x 35 Beam) Cope cut dimensions
Hole spacing dimension
Assembly clearance dimension
(C)
Setback dimension (1/2”)
Edge distance dimension for 3/4”
diameter fastener
Beam length dimensions
Angle dimensions
Gage outstanding leg (GOL)
dimension
Center to Center dimension
Title and Scale

5. Shop drawing (W18 x 60 beam) Hole spacing dimension
Beam length dimensions
Center to Center dimension
The term Orthographic is derived from the word “orthos” meaning perpendicular or 90o

6. Erection Plan
Beam designations
Erection marks
Title and Scale

7. Bill of Materials
Each principle view has it’s own “point of sight”

8. General Notes