1. Technically above the Rest
GENERAL BRIEFING PSM 1 & PSM 2 FACULTY OF MECHANICAL & MANUFACTURING ENGINEERING UNIVERSITI TUN HUSSEIN ONN MALAYSIA
Technically above the Rest

2. Content; FKMP PSM Committee Important Date PSM Work Schedule
PSM Seminar
PSM Process Flow
Thesis Submission
PLO Survey

3. FKMP PSM Committee 2017/2018 A/PROF. DR SALIHATUN BINTI MD SALLEH
DEPUTY DEAN (ACADEMIC)
PSM COORDINATOR
DR MOHD NORIHAN BIN IBRAHIM
A KAMPUS BANDAR /
JKBR
A/PROF. DR HAMIMAH BINTI ABD RAHMAN E
JKM
DR. ZAMRI BIN NORANAI
D1-210
JKT
MD NOR ANUAR BIN MOHAMAD
Aras 5 Bilik PM 17 FSKTM
TN HJ. SAIFUL FAZAD BIN AHMAD
PUSAT SUMBER, FKMP
BLOCK C6
JKPI
ZAZULI BIN MOHID
D1-314
JKA
A/PROF DR. ZAMRI BIN OMAR C
FKMP

4. Important Date Always refer to PSM 1 & PSM 2 WORK SCHEDULE
Remind your supervisor about the date
Don’t do last minute work
YOUR PROJECT YOUR REPONSIBILITY !!

5. PSM Work Schedule Work Schedule – PSM 1 Work Schedule – PSM 2
Effective Presentation Workshop – 30/11/2017
Display Seminar Schedule - * 30/11/2017
Pre-PSM briefing for future std - *7/12/2017
PSM 1 Seminar – 19/12 – 21/12/2017**
Work Schedule – PSM 2
PSM 2 Seminar – 27/ /12/2017**
* Prior to changes
**Always refer to the latest Seminar PSM schedule by department.

6. PSM Seminar
Refer to seminar schedule daily as there is always changes.
Please come at the beginning of session, and wait until all student finish
Not attending seminar= FAIL

7. Related Forms PSM 1 FORMS PSM 2 FORMS
D8a Borang Penilaian Seminar – Panel
D6a Borang Penilaian Draf Akhir – Penyelia
D7 Borang Pengesahan Penyerahan Laporan PSM 1
D5 Borang Tuntutan PSM
PSM 2 FORMS
D8b Borang Penilaian Seminar – Panel
D6b Borang Penilaian Draf Akhir – Penyelia
D7 Borang Pengesahan Penyerahan Laporan PSM 2 & Kertas Kerja Seminar
D9 Borang Penyerahan Tesis
Borang Pengesahan Status Tesis – Dalam Tesis

8. PSM 1 Process Flow Week 1-3 Week 3 – Week 4 Start Week 4 – Week 10
Choose title
Submit proposal – D Form
Discuss with SV
Prepare PSM 1 report
Submit draft to SV
Prepare Final Report
Submit final report to supervisor
SV verify report
Submit final report to panels
Submit D7 form to PSM representative
PSM 1 seminar
Start
Week 4 – Week 10
Week 11- Week 12
Week 12- Week 13
End
Week 13
Week 14

9. PSM 2 Process Flow Start Prepare thesis draft Discuss with SV
Conduct Experiment or simulation
Prepare thesis draft
Discuss with SV
Submit final thesis to supervisor
SV verify final thesis
Submit thesis to the panel
Submit D7 form to PSM representative
PSM seminar
Prepare thesis according to panel comments
Check plagiarism
Prepare hard bound thesis
Submit to Pusat Sumber FKMP with D9 form
(W1 – W10)
(W1 – W10)
(W1 – W10)
Preliminary Plagiarism Check (W10-W14)
(W15)
End
(W16 – W17)
(W16 – W19)
Conduct Experiment or simulation
Prepare thesis draft
Discuss with SV
Submit final thesis to supervisor
SV verify final thesis
Submit thesis to the panel
Submit D7 form to PSM representative
PSM seminar
Prepare thesis according to panel comments
Check plagiarism
Prepare hard bound thesis
Submit to Pusat Sumber FKMP with D9 form
Conduct Experiment or simulation
Prepare thesis draft
Discuss with SV
Submit final thesis to supervisor
SV verify final thesis
Submit thesis to the panel
Submit D7 form to PSM representative
PSM seminar
Prepare thesis according to panel comments
Check plagiarism
Prepare hard bound thesis
Submit to Pusat Sumber FKMP with D9 form
Conduct Experiment or simulation
Prepare thesis draft
Discuss with SV
Submit final thesis to supervisor
SV verify final thesis
Submit thesis to the panel
Submit D7 form to PSM representative
PSM seminar
Prepare thesis according to panel comments
Check plagiarism
Prepare hard bound thesis
Submit to Pusat Sumber FKMP with D9 form
Conduct Experiment or simulation
Prepare thesis draft
Discuss with SV
Submit final thesis to supervisor
SV verify final thesis
Submit thesis to the panel
Submit D7 form to PSM representative
PSM seminar
Prepare thesis according to panel comments
Check plagiarism
Prepare hard bound thesis
Submit to Pusat Sumber FKMP with D9 form
Conduct Experiment or simulation
Prepare thesis draft
Discuss with SV
Submit final thesis to supervisor
SV verify final thesis
Submit thesis to the panel
Submit D7 form to PSM representative
PSM seminar
Prepare thesis according to panel comments
Check plagiarism
Prepare hard bound thesis
Submit to Pusat Sumber FKMP with D9 form

10. PSM 2
Plagiarism Check
Student need to SUBMITT For Plagiarism Checking Using “Turn It In” Software BEFORE SEMINAR PRESENTATION.
(WEEK 10 – WEEK 14).
Tun It In Application,
Class ID :
Enrollment Key : SEM

11. Thesis Submission
Minimum 3 copy (supervisor, 2 copy submit at Pusat Sumber, FKMP)
CD should content:
All thesis content according to chapter (either by chapter or whole thesis)
Seminar paper
Appendix (data, figure, calculation, etc.)
Write name, matrix number and project title on the CD
Student who FAIL to submit their thesis by 25 January 2017 will FAIL this course.

12. Seminar Paper
ALL PSM 2 STUDENTS are REQUIRED to prepare the SEMINAR PAPER using The International Journal of Integrated Engineering (IJIE), UTHM format.
IJIE is a single blind peer reviewed journal which publishes 3 times a year since 2009.
The journal is dedicated to various issues focusing on 3 different fields which are:-
Mechanical, Materials and Manufacturing Engineering.
Electrical and Electronic Engineering.
Civil and Environmental Engineering.  

13. IJIE FORMAT – seminar paper
Open the IJIE website as follows;
url:
Go to AUTHOR GUIDELINES
 Please use this paper as a template for your SEMINAR PAPER;
IJIE Template

14. PLO Survey Form (Compulsory)
Student are required to submit PLO Survey Form during the submission of hardbound thesis.
FKMP Alumni Database as follows:

15. GOOD LUCK &
ALL THE BEST!!
With Wisdom We Explore