Presentation is loading. Please wait.

Presentation is loading. Please wait.

Dr. John P. Abraham Professor UTPA

Similar presentations


Presentation on theme: "Dr. John P. Abraham Professor UTPA"— Presentation transcript:

1 Dr. John P. Abraham Professor UTPA
21-IP addressing Dr. John P. Abraham Professor UTPA

2 Lecture notes I would strongly suggest you pay close attention to my lecture and take good notes. I go far beyond the textbook on this topic.

3 Addressing Physical Will Discuss more later Logical – see next slide
MAC addresses do not suffice because the Internet can include multiple network technologies and each technology defines its own MAC addresses. Will Discuss more later Logical – see next slide

4 Logical Address The advantage of IP addressing lies in uniformity: an arbitrary pair of application programs can communicate without knowing the type of network hardware or MAC addresses being used

5 IP address 32 bits Hierarchy – prefix and suffix
Prefix identifies the network – given by IANA In classful addressing, the network address (the first address in the block) is the one that is assigned to the organization. The range of addresses can automatically be inferred from the network address. Suffix identifies the computer –given locally No two computers can have the same public IP

6 Octets IP address is written in 4 octets with separating dots.
One of the UTPA CS address is: What is this address in decimal notation?

7 Classful IP addressing
Divided IP address space into three primary classes A, B, C and also there exist class D (multicasting) and E. First four (MSB) bits will determine its class

8 Size of Network Number Bit field
Class Leading Bits Size of Network Number Bit field Size of Rest Bit field Number of Networks Addresses per Network Start address End address Class A     0     8     24     128 (27)     16,777,216 (224) Class B    10     16     16,384 (214)     65,536 (216) Class C  110     2,097,152 (221)     256 (28) Class D (multicast) 1110     not defined Class E (reserved) 1111

9 Finding the address class

10 Figure 4.5 Finding the class in decimal notation

11 Find the class of each address:
a b c d e Solution a. The first byte is 227 (between 224 and 239); the class is D. b. The first byte is 193 (between 192 and 223); the class is C. c. The first byte is 14 (between 0 and 127); the class is A. d. The first byte is 252 (between 240 and 255); the class is E. e. The first byte is 134 (between 128 and 191); the class is B.

12 LAN The network portion of all IP addresses should be the same on all machines within a LAN You can use VLAN to put machines from different networks together artificially. All computers within a LAN can be made visible to others in the LAN Machines in two different LANs can communicate using a Bridge.

13 LAN One should be able to share files with others within the LAN
An user of the file should be able to MAP the directory and give a drive letter (in windows) Anyone wanting to connect to machine that does not belong the LAN must go through a routing table (usually located within the Router)

14 Transition to IPv6 When IP4 was defined only few computer networks existed Each year the networks are nearly doubling Changing IP addressing scheme is very costly. So, IPV4 is still used.

15 Authority for IP addresses
Internet Corporation for Assigned Name and Numbers (ICANN) Authorizes a set of registrars to assign domains and related network address. Registrars make large blocks of addresses available to major ISPs

16 Subnet Addressing The network address is the beginning address of each block. It can be found by applying the default mask to any of the addresses in the block (including itself). It retains the netid of the block and sets the hostid to zero.

17 Subnets Makes smaller networks for better security and easy management
Mask is used by routers to find the network portion of the address. AND operation.

18 Creating subnet masks Determine how many subnets you need
How many bits would be required to create that many subnets? For example you need 8 subnets, need 3 bits set aside. Certain addresses are reserved, so all subnets can’t be used. Turn those bits (msb) to 1. For example class C, default subnet is , if you decided to subnet it to 8 subnets, then you would use the subnet I will explain in class.

19 Example 12 Given the address , find the beginning address (network address). Solution The default mask is , which means that only the first byte is preserved and the other 3 bytes are set to 0s. The network address is

20 Example 15 What is the subnetwork address if the destination address is and the subnet mask is ? Solution We apply the AND operation on the address and the subnet mask. Address ➡ Subnet Mask ➡ Subnetwork Address ➡

21 Figure 4.25 Comparison of a default mask and a subnet mask

22 Table 4.3 Special addresses
Private IPs

23 CIDR notation Classless Inter-Domain routing (CIDR)
Ddd.ddd.ddd.ddd/m /26 Used for subnetting and supernetting An ISP can now subdivide a larger blocks and hand out 1, 2, 4, 8,.. (power of 2) to the customers. These are called variable length bocks and we use a slash notation.

24 Slash notation In classless addressing we need to include the prefix length to each address if we need to find the block of the address. Given the address /27 the netmask is (27 ones).

25 Calculations Given the address /20 find the number of address, the first and last address in the block There are 20 1s. So ? is The mask is Number of addresses is 32-20, so 212 or 4096 To find the first address AND the given address with the mask AND = (third octet AND To find the last address: OR the address with the complement of the mask (also we can keep all the left most bits of the IP and change the 12 rightmost to 1s.

26 /22 Mask is First IP AND = = Number of IP is = =1024 Last

27 Block Assignment The number of IP addresses requested should be power of 2 The requested block needs to be allocated where there are a contiguous number of unallocated addresses in the address space. Suppose a block of 1000 IP requested. Power of 2 is 210 which is 1024. Prefix length is which is 22. From the available address space, say /22 (which is divisible by 1024) is given. Last address is

28 Special addresses All zeros – When a device does not know its on IP address, it requests one using this address as the source and sends a limited broadcast asking for an IP. Therefore, all zeros means, me. All ones. Limited broadcast address in the current network. Loopback address is localhost. Used to test a software on a machine.


Download ppt "Dr. John P. Abraham Professor UTPA"

Similar presentations


Ads by Google