1. <month year>
doc.: IEEE a
Jan 2007
Project: IEEE P Working Group for Wireless Personal Area Networks (WPANs)
Submission Title: [TG 3c Channel Model Status Report]
Date Submitted: [16 Jan, 2007]
Source: [Su-Khiong Yong]
Company [Samsung Advanced Institute of Technology (SAIT)]
Address [P. O. Box 111, Suwon , Korea]
Voice:[ ], FAX: [ ],
Re : [Progress Report for TG3c Channel Model]
Abstract: []
Purpose:[This document discusses the propagation issues and parameters for IEEE c]
Notice :This document has been prepared to assist the IEEE P It is offered as a basis for
discussion and is not binding on the contributing individual(s) or organization(s). The material in
this document is subject to change in form and content after further study. The contributor(s)
reserve(s) the right to add, amend or withdraw material contained herein.
Release:The contributor acknowledges and accepts that this contribution becomes the property of IEEE
and may be made publicly available by P
Su-Khiong Yong, Samsung-SAIT
<author>, <company>

2. TG3c Channel Model Status Report
Jan 2007
TG3c Channel Model Status Report
Channel model document 06/195r5 has was approved in Dallas meeting (Nov 06)
A comment was received to include a antenna pattern of the reference antenna used in CMD.
06/195r6 will be uploaded and will need to approve it.
Su-Khiong Yong, Samsung-SAIT

3. TG3c CM Matlab Code Status Report
Jan 2007
TG3c CM Matlab Code Status Report
Latest CM release is 1.0 (06/527) was on the server
Merger of TSV engine and SV engine into a single package.
No specific comments/bugs have been reported so far for version 1.0
07/533r0 will discuss the latest CM release 1.0
Su-Khiong Yong, Samsung-SAIT

4. Open issue in Jan. 16 2007 and comments
<month year>
doc.: IEEE a
Jan 2007
Open issue in Jan and comments
CM1.5 is missing in the MATLAB code
The version 1.1 code includes the missing CM in the flow of TSV model.
How beam-width of RX antenna changes?
You can input the beam-width from Menu.m in Ver 1.1 code
Does the code do any limitation if power of ray before the multiplication by antenna gain is higher than free space loss + 6dB ?
No, the code does not use any limitation.
When changed beam-width of TX antenna, why the number of rays did not decrease ?
This is a channel model issue not MATLAB code issue
For CM2 and CM4, how to steer the direction of antenna
The direction to antenna is that to get maximum total power. Version 1.1 does not include the model. Next version will include it. The modified code will be released by Jan. 31 (in TSV flow)
In the version 1.1, the two antennas are faced to each other.
When Version 1.1 is released?
On Jan.16 the code will be released
Su-Khiong Yong, Samsung-SAIT
<author>, <company>

5. Jan 2007
Motion
Motion by S. K. Yong to approve the updated channel model document 06/195r6 subject to the condition that the HPBW of the antenna pattern is less than 80 degrees. Seconded by I. Lakkis.
Yes - 17
No - 0
Abstain – 8
Motion passed
Su-Khiong Yong, Samsung-SAIT

6. Jan 2007
Motion
Motion by S. Kato to approve the Matlab Code Release 1.1 (07/566r0). Seconded by S. K. Yong.
Motion by J. Barr to postpone the motion until Thursday AM2. Seconded by E. Grass
Yes - 6
No - 17
Abstain – 7
Motion to postpone failed
Chair postponed the motion until Wednesday AM1
Yes -16
No -1
Abstain – 5
Motion passed
Su-Khiong Yong, Samsung-SAIT

7. Jan 2007
Motion
Motion to approve IEEE c “TG3c Channel Modeling Sub-committee Final Report”
Moved by S. K. Yong
Seconded by S. Kato
Yes - 25
No - 0
Abstain - 2
Motion passed
Su-Khiong Yong, Samsung-SAIT

8. Jan 2007
Motion
Motion to approve 07/0580r1, 07/0581r1 07/0582r1 for the golden sets for mandatory PHY simulation
Moved by S. Kato
Seconded by I. Lakkis
Yes - 30
No - 0
Abstain – 1
Motion passed
Su-Khiong Yong, Samsung-SAIT