Presentation is loading. Please wait.

Presentation is loading. Please wait.

SPD cable length and rack location

Published byBlaze McBride Modified over 5 years ago

Similar presentations

Presentation on theme: "SPD cable length and rack location"— Presentation transcript:

1 SPD cable length and rack location
Status 01/02/08 RB24-side A RB26-side C RACKS I 18 I 19 RACKS A 13 A 14 PATCH PANEL A PATCH PANEL 0 PATCH PANEL 1 PATCH PANEL 2 PIXEL DETECTOR PATCH PANEL 3 PATCH PANEL 4 PATCH PANEL I Min=2m Max=3m Min=30m Max=40m 1.5m 15m 21m 1.13m 1.13m Patch Panel PCB 4.5m 1.5m Patch Panel PCB section E section C section B section A section F section G section I 18m Optical Patch panel 3.5m 4.5m DATA 60 opt. Fibers 109.85m CLK & SERIAL Optical patch panel PP0T Location: under TPC PP0T 70m section D 85m section H RACK D 120 PX24CR4 PX24CR1 Optical Splitter 60 opt. Fibers ~85m Trigger Module 120 opt. Fibers 109.7m 20 DDL 120 opt. Fibers SPD Fiber lengths: Trigger Crate L3-56PC,X09 Detector bias cables LV.PS + senses + temp. cables section F In green section already installed in the pit optical. Fibers

2 RB24 side 1.8V (60 cables) Total Vdrop@6A = 2.25V
2.5V (60 cables) = 1.69V Bias (10 coax cables) 3 x 60 Optical fibers DETECTOR to PP2 (1.3m) kapton cables type: -CERN EDA V2 (0.75m) -CERN EDA V2 (0.35m) = 0.055V 60 kapton cables CERN EDA V2 (1.13m) = 0.124V Diamond singlemode 9/1225/900/3000 green Patchcord Mu-Mu Patchcord Duplex Mu-Mu PP1 (~3m) (2.5mm²) = 0.18V (0.5mm²) = 0.076V Cable with 12 COAX 9/125/900/3000 green PP0 (~21m) (5mm²) = 1V (0.5mm²) = 0.8V Racks A (~15m) = 0.72V (0.5mm²) = 0.576V Rack A To power supplies (2m) To Rack CR4 (~85m) 12 micro coax in a cable RB24 side

3 RB26 side 1.8V (60 cables) Total Vdrop@6A = 2.56V
2.5V (60 cables) = 1.9V Bias (10 coax cables 3 x 60 Optical fibers DETECTOR to PP3 (1.3m) kapton cables type: -CERN EDA V2 (0.75m) -CERN EDA V2 (0.35m) = 0.055V 60 kapton cables CERN EDA V2 (1.13m) = 0.124V Diamond singlemode 9/1225/900/3000 green Patchcord Mu-Mu Patchcord Duplex Mu-Mu PP4 (4~5m) (2.5mm²) = 0.4V (0.5mm²) = 0.17V Cable with 12 COAX 9/125/900/3000 green Rack I (min30 Max 40m) (5mm²) = 1.92V (0.5mm²) = 1.536V Cable with 12 COAX To Power supplies (2m) = 0.18V (0.5mm²) = 0.076V To Rack D (~70m) RB26 side

4 ITS PIXEL CABLE LIST (RB24 section A) MCM power supply
Patch panel 1 Patch panel 2 ~3m 2.5V pin2 Cable:0.5mm² 0V pin1 Sense + pin5 AWG28 Sense - pin4 Fil blanc sur détrompeur Temp + pin9 Connector CANNON Sub D9 pins male AWG28 Temp - pin8 Fil blanc sur détrompeur X 60 Conducteurs dénudés Sur 25cm Tresse sur 1m

5 ITS PIXEL CABLE LIST (RB24 section A) Pixel chips power supply
Patch panel 1 Patch panel 2 ~3m 1.8V Pin A2 1:1V8 2:1V8 3:0V 4:0V Cable:2.5mm² 0V Pin A1 Condensateur pin2+, 3- Sense + pin2 AWG28 Sense - pin1 Fil blanc sur détrompeur spare + pin4 AWG28 spare - Pin 3 Fil blanc sur détrompeur Connector CANNON Sub-D 7w2 contacts mixtes male Conducteurs dénudés Sur 25cm X 60 Tresse sur 1m

6 ITS PIXEL CABLE LIST (RB24 section A) Bias power supply Patch panel 1
~3m Bias1 Micro coax 25 CANNON male 25 CANNON female 0V Bias12 Micro coax 0V 12 micro coax in a cable x10 CONNECTEUR 25 PINS CANNON female CH0 PIN1+, 14- CH1 PIN2+, 15- CH2 PIN3+, 16- CH3 PIN4+, 17- CH4 PIN5+, 18- CH5 PIN6+, 19- CH6 PIN7+, 20- CH7 PIN8+, 21- CH8 PIN9+, 22- CH9 PIN10+, 23- CH10 PIN11+, 24- CH11 PIN12+, 25- CONNECTEUR 25 PINS CANNON male CH0 PIN1+, 14- CH1 PIN2+, 15- CH2 PIN3+, 16- CH3 PIN4+, 17- CH4 PIN5+, 18- CH5 PIN6+, 19- CH6 PIN7+, 20- CH7 PIN8+, 21- CH8 PIN9+, 22- CH9 PIN10+, 23- CH10 PIN11+, 24- CH11 PIN12+, 25- Tresse sur 1m

7 ITS PIXEL CABLE LIST (RB24 section B) MCM power supply
Patch panel 0 Patch panel 1 21m Connector Sub D 9 pins male 2.5V Connector Sub D 9 pins female Cable:0.5mm² 0V Sense + Sense - Temp + Temp - 1 = 0V (black) 2 = 2V5 (blue) 3 = not connected 4 = S- (white) 5 = S+ (Red) 6 = not connected 7 = not connected 8 = com.Temp (white) 9 = Temp (blue) 1 = 0V (black) 2 = 2V5 (blue) 3 = not connected 4 = S- (white) 5 = S+ (Red) 6 = not connected 7 = not connected 8 = com.Temp (white) 9 = Temp (blue) X 60 Tresse sur 40cm Tresse sur 40cm

8 ITS PIXEL CABLE LIST (RB24 section B) Pixel chips power supply
Patch panel 0 Patch panel 1 ~21m 1.8V Connector CANNON Sub-D 7w2 contacts mixtes male Connector CANNON Sub-D 7w2 contacts mixtes female Cable:5mm² 0V Sense + AWG28 Sense - spare + AWG28 spare - A1 = 0V (black) A2 = 1V8 (blue) 1 = S- (white) 2 = S+ (Red) 3 = spare- (white) 4 = spare+ (blue) 5 = not connected A1 = 0V (black) A2 = 1V8 (blue) 1 = S- (white) 2 = S+ (Red) 3 = spare- (white) 4 = spare+ (blue) 5 = not connected X 60 Tresse sur 40cm Tresse sur 40cm

9 ITS PIXEL CABLE LIST (RB24 section B) Bias power supply Patch panel 0
~21m Bias1 Micro coax 25 CANNON male 25 CANNON female 0V Bias12 Micro coax 0V 12 micro coax in a cable x10 CONNECTEUR 25 PINS CANNON female CH0 PIN1+, 14- CH1 PIN2+, 15- CH2 PIN3+, 16- CH3 PIN4+, 17- CH4 PIN5+, 18- CH5 PIN6+, 19- CH6 PIN7+, 20- CH7 PIN8+, 21- CH8 PIN9+, 22- CH9 PIN10+, 23- CH10 PIN11+, 24- CH11 PIN12+, 25- CONNECTEUR 25 PINS CANNON male CH0 PIN1+, 14- CH1 PIN2+, 15- CH2 PIN3+, 16- CH3 PIN4+, 17- CH4 PIN5+, 18- CH5 PIN6+, 19- CH6 PIN7+, 20- CH7 PIN8+, 21- CH8 PIN9+, 22- CH9 PIN10+, 23- CH10 PIN11+, 24- CH11 PIN12+, 25- Tresse sur 40cm Tresse sur 40cm

10 ITS PIXEL CABLE LIST (RB24 section C) MCM power supply Patch panel 0
RACKS A Patch Panel Patch panel 0 15m 2.5V Connector Sub D 9 pins male Connector Sub D 9 pins female 0V Cable:0.5mm² Sense + AWG28 Sense - Temp + Temp - AWG28 1 = 0V (black) 2 = 2V5 (blue) 3 = not connected 4 = S- (white) 5 = S+ (Red) 6 = not connected 7 = not connected 8 = com.Temp (white) 9 = Temp (blue) 1 = 0V (black) 2 = 2V5 (blue) 3 = not connected 4 = S- (white) 5 = S+ (Red) 6 = not connected 7 = not connected 8 = com.Temp (white) 9 = Temp (blue) X60 Tresse sur 40cm Tresse sur 40cm

11 ITS PIXEL CABLE LIST (RB24 section C) Pixel chips power supply
RACKS A Patch Panel Patch panel 0 Connector CANNON Sub-D 7w2 contacts mixtes male 15 m 1.8V Connector CANNON Sub-D 7w2 contacts mixtes female Cable:5mm² 0V Sense + Sense - AWG28 spare + AWG28 spare - A1 = 0V (black) A2 = 1V8 (blue) 1 = S- (white) 2 = S+ (Red) 3 = spare- (white) 4 = spare+ (blue) 5 = not connected A1 = 0V (black) A2 = 1V8 (blue) 1 = S- (white) 2 = S+ (Red) 3 = spare- (white) 4 = spare+ (blue) 5 = not connected X60 Tresse sur 40cm Tresse sur 40cm

12 ITS PIXEL CABLE LIST (RB24 section C) Bias power supply Patch panel 0
~15m Bias1 Micro coax 25 CANNON male 25 CANNON female 0V Bias12 Micro coax 0V 12 micro coax in a cable x10 CONNECTEUR 25 PINS CANNON female CH0 PIN1+, 14- CH1 PIN2+, 15- CH2 PIN3+, 16- CH3 PIN4+, 17- CH4 PIN5+, 18- CH5 PIN6+, 19- CH6 PIN7+, 20- CH7 PIN8+, 21- CH8 PIN9+, 22- CH9 PIN10+, 23- CH10 PIN11+, 24- CH11 PIN12+, 25- CONNECTEUR 25 PINS CANNON male CH0 PIN1+, 14- CH1 PIN2+, 15- CH2 PIN3+, 16- CH3 PIN4+, 17- CH4 PIN5+, 18- CH5 PIN6+, 19- CH6 PIN7+, 20- CH7 PIN8+, 21- CH8 PIN9+, 22- CH9 PIN10+, 23- CH10 PIN11+, 24- CH11 PIN12+, 25- Tresse sur 40cm Tresse sur 40cm

13 ITS PIXEL CABLE LIST (RB24 section D) Bias power supply
Racks CR4 HV Power Supply CAEN A1519 Patch panel 0 ~85m Bias1 Micro coax 25 CANNON female 0V Bias12 Micro coax 37 pins CANNON male CH0 + PIN 33 CH0 - PIN 35 CH1 + PIN 32 CH1 – PIN 34 CH2 + PIN 12 CH2 – PIN 14 CH3 + PIN 11 CH3 – PIN 13 CH4 + PIN 28 CH4 - PIN 30 CH5 + PIN 27 CH5 – PIN 29 CH6 + PIN 7 CH6 – PIN 9 CH7 + PIN 6 CH7 – PIN 8 CH8 + PIN 23 CH8 – PIN 25 CH9 + PIN 22 CH9 – PIN 24 CH10 + PIN 2 CH10 – PIN 4 CH11 + PIN 1 CH11 – PIN 3 25 pins CANNON female CH0 + PIN 1 CH0 - PIN 14 CH1 + PIN 2 CH1 – PIN 15 CH2 + PIN 3 CH2 – PIN 16 CH3 + PIN 4 CH3 – PIN 17 CH4 + PIN 5 CH4 - PIN 18 CH5 + PIN 6 CH5 – PIN 19 CH6 + PIN 7 CH6 – PIN 20 CH7 + PIN 8 CH7 – PIN 21 CH8 + PIN 9 CH8 – PIN 22 CH9 + PIN 10 CH9 – PIN 23 CH10 + PIN 11 CH10 – PIN 24 CH11 + PIN 12 CH11 – PIN 25 0V 12 micro coax in a single cable x12

14 ITS PIXEL CABLE LIST (RB24 section E) MCM power supply
CAEN 3009 PS Anderson Connectors 30A RACKS A Patch Panel ~1.5 m 2.5V Connector CANNON Sub-D 9 pins female Cable:0.5mm² 0V Sense + Sense - AWG28 Connecteur AMP 4 pins temp + AWG28 temp - Pin CANNON sans connecteur X60

15 ITS PIXEL CABLE LIST (RB24 section E) Pixel chips power supply
CAEN 3009 PS Anderson Connectors 30A RACKS A Patch Panel ~1.5 m 1.8V Connector CANNON Sub-D 7w2 contacts mixtes female Cable:5mm² 0V Sense + Sense - AWG28 Connecteur AMP 4 pins spare + AWG28 spare - Fil blanc sur détrompeur X60

16 ITS PIXEL CABLE LIST (RB26 section F) MCM power supply
Patch panel 4 Patch panel 3 ~4.5m 2.5V pin2 Cable:0.5mm² 0V pin1 Sense + pin5 AWG28 Sense - pin4 Fil blanc sur détrompeur Temp + pin9 Connector CANNON Sub D9 pins male AWG28 Temp - pin8 Fil blanc sur détrompeur X 60 Conducteurs dénudés Sur 25cm Tresse sur 0.4m

17 ITS PIXEL CABLE LIST (RB26 section F) Pixel chips power supply
Patch panel 4 Patch panel 3 ~4.5m 1.8V Pin A2 1:1V8 2:1V8 3:0V 4:0V Cable:2.5mm² 0V Pin A1 Condensateur pin2+, 3- Sense + pin2 AWG28 Sense - pin1 Fil blanc sur détrompeur spare + pin4 AWG28 spare - Pin 3 Fil blanc sur détrompeur Connector CANNON Sub-D 7w2 contacts mixtes male Conducteurs dénudés Sur 25cm X 60 Tresse sur 0.4m

18 ITS PIXEL CABLE LIST (RB26 section F) Bias power supply Patch panel 4
~4.5m Bias1 Micro coax 25 CANNON male 25 CANNON female 0V Bias12 Micro coax 0V 12 micro coax in a cable x10 CONNECTEUR 25 PINS CANNON female CH0 PIN1+, 14- CH1 PIN2+, 15- CH2 PIN3+, 16- CH3 PIN4+, 17- CH4 PIN5+, 18- CH5 PIN6+, 19- CH6 PIN7+, 20- CH7 PIN8+, 21- CH8 PIN9+, 22- CH9 PIN10+, 23- CH10 PIN11+, 24- CH11 PIN12+, 25- CONNECTEUR 25 PINS CANNON male CH0 PIN1+, 14- CH1 PIN2+, 15- CH2 PIN3+, 16- CH3 PIN4+, 17- CH4 PIN5+, 18- CH5 PIN6+, 19- CH6 PIN7+, 20- CH7 PIN8+, 21- CH8 PIN9+, 22- CH9 PIN10+, 23- CH10 PIN11+, 24- CH11 PIN12+, 25- Tresse sur 1m

19 ITS PIXEL CABLE LIST (RB26 section G) MCM power supply
Patch panel I Patch panel 4 min 30m, max 40m Connector Sub D 9 pins male 2.5V Connector Sub D 9 pins female Cable:0.5mm² 0V Sense + Sense - Temp + Temp - 1 = 0V (black) 2 = 2V5 (blue) 3 = not connected 4 = S- (white) 5 = S+ (Red) 6 = not connected 7 = not connected 8 = com.Temp (white) 9 = Temp (blue) 1 = 0V (black) 2 = 2V5 (blue) 3 = not connected 4 = S- (white) 5 = S+ (Red) 6 = not connected 7 = not connected 8 = com.Temp (white) 9 = Temp (blue) X 60 Tresse sur 40cm Tresse sur 40cm

20 ITS PIXEL CABLE LIST (RB26 section G) Pixel chips power supply
Patch panel I Patch panel 4 min 30m, max 40m 1.8V Connector CANNON Sub-D 7w2 contacts mixtes male Connector CANNON Sub-D 7w2 contacts mixtes female Cable:5mm² 0V Sense + AWG28 Sense - spare + AWG28 spare - A1 = 0V (black) A2 = 1V8 (blue) 1 = S- (white) 2 = S+ (Red) 3 = spare- (white) 4 = spare+ (blue) 5 = not connected A1 = 0V (black) A2 = 1V8 (blue) 1 = S- (white) 2 = S+ (Red) 3 = spare- (white) 4 = spare+ (blue) 5 = not connected X 60 Tresse sur 40cm Tresse sur 40cm

21 ITS PIXEL CABLE LIST (RB26 section G) Bias power supply Patch panel I
min 30m, max 40m Bias1 Micro coax 25 CANNON male 25 CANNON female 0V Bias12 Micro coax 0V 12 micro coax in a cable x10 CONNECTEUR 25 PINS CANNON female CH0 PIN1+, 14- CH1 PIN2+, 15- CH2 PIN3+, 16- CH3 PIN4+, 17- CH4 PIN5+, 18- CH5 PIN6+, 19- CH6 PIN7+, 20- CH7 PIN8+, 21- CH8 PIN9+, 22- CH9 PIN10+, 23- CH10 PIN11+, 24- CH11 PIN12+, 25- CONNECTEUR 25 PINS CANNON male CH0 PIN1+, 14- CH1 PIN2+, 15- CH2 PIN3+, 16- CH3 PIN4+, 17- CH4 PIN5+, 18- CH5 PIN6+, 19- CH6 PIN7+, 20- CH7 PIN8+, 21- CH8 PIN9+, 22- CH9 PIN10+, 23- CH10 PIN11+, 24- CH11 PIN12+, 25- Tresse sur 40cm Tresse sur 40cm

22 ITS PIXEL CABLE LIST (RB26 section H) Bias power supply
Racks CR4 HV Power Suppl CAEN A1519 Patch panel I ~70m Bias1 Micro coax 25 CANNON female 0V Bias12 Micro coax 37 pins CANNON male CH0 + PIN 33 CH0 - PIN 35 CH1 + PIN 32 CH1 – PIN 34 CH2 + PIN 12 CH2 – PIN 14 CH3 + PIN 11 CH3 – PIN 13 CH4 + PIN 28 CH4 - PIN 30 CH5 + PIN 27 CH5 – PIN 29 CH6 + PIN 7 CH6 – PIN 9 CH7 + PIN 6 CH7 – PIN 8 CH8 + PIN 23 CH8 – PIN 25 CH9 + PIN 22 CH9 – PIN 24 CH10 + PIN 2 CH10 – PIN 4 CH11 + PIN 1 CH11 – PIN 3 25 pins CANNON female CH0 + PIN 1 CH0 - PIN 14 CH1 + PIN 2 CH1 – PIN 15 CH2 + PIN 3 CH2 – PIN 16 CH3 + PIN 4 CH3 – PIN 17 CH4 + PIN 5 CH4 - PIN 18 CH5 + PIN 6 CH5 – PIN 19 CH6 + PIN 7 CH6 – PIN 20 CH7 + PIN 8 CH7 – PIN 21 CH8 + PIN 9 CH8 – PIN 22 CH9 + PIN 10 CH9 – PIN 23 CH10 + PIN 11 CH10 – PIN 24 CH11 + PIN 12 CH11 – PIN 25 0V 12 micro coax in a single cable x12

23 ITS PIXEL CABLE LIST (RB26 section I) MCM power supply
CAEN 3009 PS Anderson Connectors 30A RACKS I Patch Panel ~1.5 m 2.5V Connector CANNON Sub-D 9 pins female Cable:0.5mm² 0V Sense + Sense - AWG28 Connecteur AMP 4 pins temp + AWG28 temp - Pin CANNON sans connecteur X60

24 ITS PIXEL CABLE LIST (RB26 section I) Pixel chips power supply
CAEN 3009 PS Anderson Connectors 30A RACKS I Patch Panel ~1.5 m 1.8V Connector CANNON Sub-D 7w2 contacts mixtes female Cable:5mm² 0V Sense + Sense - AWG28 Connecteur AMP 4 pins spare + AWG28 spare - Fil blanc sur détrompeur X60

25 ITS PIXEL CABLE LIST (RB24)
Pixel chips & MCM Patch panel 2 Amp mate-N lok 1.8V 5.5A= 50mV 5.5A = 85mV Second bus extender First bus extender PIXEL BUS 0.75m 0.35m 0V P = 0.3W P = 0.5W Connection By soldering points 2.5V 0.4A = 100mV ZIF JST connector MCM extender 1.13m MCM 0V P = 0.04W X 120 ERNI 26 pins First bus extender: EDA V2(CERN) Second bus extender: EDA V2(CERN) MCM extender: EDA V2(CERN) Patch panel connector 1.8V: 4 contacts: AMP/ TYCO female front panel AMP 4 contacts male on extender Patch panel connector MCM extender: ERNI 26 pins female SCEM MCM extender: ERNI 26 pins male

26 HALF SECTOR CABLING Pixel detector Patch panel 1 Patch panel 1 PCB
EDA V2 EDA V2 Cable 2 x 2.5mm² 1.8V 1000µF/16V Second bus extender 0.75m First bus extender 0.35m PIXEL BUS 1 1.8V senses AMP 4pins PIXEL BUS 2 X 6 Temp monitoring PIXEL BUS 3 PIXEL BUS 4 PIXEL BUS 5 PIXEL BUS 6 EDA V2 ERNI 26 pins 1.13m MCM 1 Cable 2 x 0.5mm² 2.5V 330µF MCM extender X6 MCM 2 2.5V senses MCM 3 SUB-D 25 PINS MCM 4 Bias cable 12 x coax In one cable MCM 5 MCM 6 Patch panel 1 PCB Pixel detector Patch panel 1

27 SPD sector equipped

Download ppt "SPD cable length and rack location"

Similar presentations

RPC Electronics Overall system diagram Current status At detector

RPC Electronics Overall system diagram Current status At detector
EMB PAR, 23 nov. 2001 P. Perrodo, LAPP, Annecy1 ATLAS EMB SERIE MODULE CABLING Experience started with three successive prototype modules (module 0) in.

EMB PAR, 23 nov P. Perrodo, LAPP, Annecy1 ATLAS EMB SERIE MODULE CABLING Experience started with three successive prototype modules (module 0) in.
Bagby L0 Workshop 9.25.03 L0 Infrastructure  Mapping  Installations u Horseshoe Area s Adapter Card u Cathedral s Low Voltage Fuse Panel u Platform s.

Bagby L0 Workshop L0 Infrastructure  Mapping  Installations u Horseshoe Area s Adapter Card u Cathedral s Low Voltage Fuse Panel u Platform s.
ITS TGeo geometry Status and challenges By Bjørn S. Nilsen The Ohio State University.

ITS TGeo geometry Status and challenges By Bjørn S. Nilsen The Ohio State University.
NA62 GTK Cables & Patch Panels. TCC8_GTK1 TCC8_GTK2_GTK3.

NA62 GTK Cables & Patch Panels. TCC8_GTK1 TCC8_GTK2_GTK3.
RPC Electronics Overall system diagram –At detector –Inside racks Current status –Discriminator board –TDC board –Remaining task.

RPC Electronics Overall system diagram –At detector –Inside racks Current status –Discriminator board –TDC board –Remaining task.
SPD general meeting Pixel bus and Pilot MCM Integration CERN October 8, 2002.

SPD general meeting Pixel bus and Pilot MCM Integration CERN October 8, 2002.
L. Greiner 1PXL BNL Safety Review– September 26, 2011 STAR HFT LBNL Leo Greiner, Eric Anderssen, Thorsten Stezelberger, Joe Silber, Xiangming Sun, Michal.

L. Greiner 1PXL BNL Safety Review– September 26, 2011 STAR HFT LBNL Leo Greiner, Eric Anderssen, Thorsten Stezelberger, Joe Silber, Xiangming Sun, Michal.
1 CARRIER BUS LAYOUT(a) ± 193 mm ladder1ladder2 15.86 mm 13.62 mm Pixel chip Michel Morel EP/ED 09/2000 32 x 425µ 256 x 50µ Decoupling capacitors 16. 8.

1 CARRIER BUS LAYOUT(a) ± 193 mm ladder1ladder mm mm Pixel chip Michel Morel EP/ED 09/ x 425µ 256 x 50µ Decoupling capacitors
Chamber PCB s, FEB s, Cooling, HV/LV Distribution 1)PCB designs-track widths, track to track distances … 2) Double sided and Multi layer, modular approach.

Chamber PCB s, FEB s, Cooling, HV/LV Distribution 1)PCB designs-track widths, track to track distances … 2) Double sided and Multi layer, modular approach.
Infrastructure for LHCb Upgrade workshop – MUON detector Infrastructure for LHCB Upgrade workshop: MUON power, electronics, cable Muon upgrade in a nutshell.

Infrastructure for LHCb Upgrade workshop – MUON detector Infrastructure for LHCB Upgrade workshop: MUON power, electronics, cable Muon upgrade in a nutshell.
1 CARRIER BUS LAYOUT(a) ± 193 mm ladder1ladder2 15.86 mm 13.62 mm Pixel chip Michel Morel EP/ED 09/2000 32 x 425µ 256 x 50µ Decoupling capacitors 16. 8.

1 CARRIER BUS LAYOUT(a) ± 193 mm ladder1ladder mm mm Pixel chip Michel Morel EP/ED 09/ x 425µ 256 x 50µ Decoupling capacitors
1 HV Bias Power Patch Panel for Scintillator KLM Gerard Visser Xiaowen Shi 2015-07-16 overview Schematics layout Parts.

1 HV Bias Power Patch Panel for Scintillator KLM Gerard Visser Xiaowen Shi overview Schematics layout Parts.
Printed 10/7/2011 SCOUT, REV5, WIRING KIT, GUIDE SONAR Connector: JST Length: 6.5 inches 28AWG Start: BreakFly End: Sonar 0, 1 FEMALE Connector: JST.

Printed 10/7/2011 SCOUT, REV5, WIRING KIT, GUIDE SONAR Connector: JST Length: 6.5 inches 28AWG Start: BreakFly End: Sonar 0, 1 FEMALE Connector: JST.
NA62 GigaTracKer Working Group meeting Integration and GTK-carrier PCB design April 9, 2013 Michel Morel.

NA62 GigaTracKer Working Group meeting Integration and GTK-carrier PCB design April 9, 2013 Michel Morel.
Saverio Minutoli INFN Genova 1 1 T1 Electronic status Electronics Cards involved: Anode Front End Card Cathode Front End Card Read-Out Control card VFAT.

Saverio Minutoli INFN Genova 1 1 T1 Electronic status Electronics Cards involved: Anode Front End Card Cathode Front End Card Read-Out Control card VFAT.
Readout electronics for the MUV detectors R. Fantechi 28/3/2012.

Readout electronics for the MUV detectors R. Fantechi 28/3/2012.
1 21.11.03 Anatoli Konoplyannikov Design and integration of HV, LED monitoring and calibration system for HCAL Overview of the subsystems design High voltage.

Anatoli Konoplyannikov Design and integration of HV, LED monitoring and calibration system for HCAL Overview of the subsystems design High voltage.
Long distance cable ( ) –Double DB9-to-DB9 cable (2x10 shielded twisted pair cable) SCEM 04.21.22.720.504.21.22.720.5 –AWG28, Impedance 113 Ω –9.6 CHF/m.

Long distance cable ( ) –Double DB9-to-DB9 cable (2x10 shielded twisted pair cable) SCEM –AWG28, Impedance 113 Ω –9.6 CHF/m.
1 5 December 2012 Laurent Roy Infrastructure / Electronics Upgrade -Cabling (long distance) -Rack and Crate (space, electrical distribution, cooling) -Detector.

1 5 December 2012 Laurent Roy Infrastructure / Electronics Upgrade -Cabling (long distance) -Rack and Crate (space, electrical distribution, cooling) -Detector.

Similar presentations

Ads by Google