1. MIN AND MAX TIMING PATHS
BASAVARAJU.Y.G
1SI16LVS03

2. INTRODUCTION
The total delay for the logic to propagate through a logic path is referred to as the Path delay
Path delay corresponds to the sum of the delays through the various logic cells and nets along the path.
There are multiple paths through which the logic can propagate to the required destination point.

3. EXAMPLE

4. Cont..
The paths corresponding to the maximum timing and minimum timing are referred to as the max path and min path respectively.
A max path between two end points is the path with the largest delay.
A min path is the path with the smallest delay with the largest delay.

5. EXAMPLE FOR MAX & MIN TIMING PATHS
The output of first D-FF is propagate to circuit output through U0R4,UNAND6 takes less time known as Min path whereas the same propagate to output through UNAND0,UOR2,UNAND6 takes more time known as Max path.