1. Product Model Vertical Flange Rod Hangers
Fixmart Data Sheet V01
Product Model Vertical Flange Rod Hangers
Vertical Flange Rod Hangers combine a Vertical Flange Clip with a Rod Hanger. These can be used to suspend threaded rod from roof purlins and steel beams.
Technical data supplied by the manufacturer
Typical Use
E-Klips Product
These Vertical Flange Rod Hangers are supplied in boxes of 25 pieces.
Available in sizes M8 and M10 they are suitable for flange thicknesses of mm
Part Number
Flange Width
Hole Diameter
Load Rating (kg)
AV155-AM8T
1.5 – 4.0mm M8 68
AV155-AM10T
M10
Remark: This technical data sheet replaces all previous versions. The technical data contained herein is given in good faith and we cannot be held liable for any errors, inaccuracies, omissions or editorial failings. The information detailed in this technical data sheet is given by way of indication and is not exhaustive, users should contact either the seller or the manufacturer of the product for additional technical information concerning its use, if they think the information in their possession needs to be clarified in any way.
Solutions, Service and Supplies to the Trade Springhead Enterprise Park, Springhead Road, Northfleet, Kent DA11 8HJ T F E