Presentation is loading. Please wait.

Presentation is loading. Please wait.

LEARNING TARGET WATER CYCLE What are the atmospheric conditions needed for various processes of the water cycle to occur? Instructional Approach(s): The.

Similar presentations


Presentation on theme: "LEARNING TARGET WATER CYCLE What are the atmospheric conditions needed for various processes of the water cycle to occur? Instructional Approach(s): The."— Presentation transcript:

1 LEARNING TARGET WATER CYCLE What are the atmospheric conditions needed for various processes of the water cycle to occur? Instructional Approach(s): The teacher should introduce the essential question and the standard that aligns to the essential question. Standard: S6E3b. Relate various atmospheric conditions to stages of the water cycle

2 Water Cycle Diagram Instructional Approach(s): Each student should complete the Water Cycle Pretest [linked on the resource page]. The teacher should use the pretest to determine if the stages of the water cycle should be reviewed or if the teacher can move forward with atmospheric conditions related to the water cycle. If differentiation is needed, see the curriculum map for possible resources.

3 Remembering the Water Cycle
Instructional Approach(s): The teacher should use the diagram to review the main stages of the water cycle. Water Vapor Molecules

4 Stages of the Water Cycle are connected to atmospheric conditions.
Turn to an elbow partner and discuss what is meant by atmospheric condition and possible examples. Instructional Approach(s): The teacher should present the information on the slide and have students partner up to discuss the meaning of atmospheric condition. . Partners can be determined by the students or the teacher can provide more specific directions such as turn to the person directly in front/behind you or to the right/left of you, etc. It may be necessary to have a group of three if you have an uneven number of students. Do not allow more than 30 seconds to 1 minute of discussion time. The teacher should be walking around listening and redirecting discussions as needed. The teacher can briefly discuss student responses. When ready, click to the next slide to discuss the answer.

5 Atmospheric condition refers to the state of the atmosphere in terms of temperature and wind and clouds and precipitation. Instructional Approach(s): The teacher should present the information on the slide.

6 Use your graphic organizer to record important information during the lesson.
Instructional Approach(s): The teacher should give each student a copy of the Water Cycle & Atmospheric Conditions Graphic Organizer [linked on the resource page] to record important information during the lesson.

7 Evaporation Instructional Approach(s): The teacher should use the slide to introduce evaporation.

8 Water Vapor Molecules Heat evaporates water into water vapor (gas). Water vapor molecules fit into spaces among the molecules that make up air. Instructional Approach(s): The teacher should present the information on the slide while the students record the important information on their graphic organizer.

9 Humidity is the amount of water vapor in the air.
Instructional Approach(s): The teacher should present the information on the slide. Humidity will be covered more in depth in the next unit with weather. However, the teacher may want to have the students add humidity to their graphic organizer (near the water vapor molecules).

10 Instructional Approach(s): The teacher should use the slide to illustrate that humidity represents the amount of water vapor in the air and that higher humidity means there are more water vapor molecules in the air. In relation, it means the temperature is warmer because in warmer temperatures, the particles move faster and don’t easily come together. Do not focus on the term relative humidity.

11 How does temperature affect evaporation?
What atmospheric condition occurs due to evaporation? *Higher temperatures = more evaporation. *More evaporation = higher humidity (more water vapor in the air) Instructional Approach(s): The teacher should present the information on the slide while the students record the important information on their graphic organizer.

12 COOLING temperatures change water vapor to liquid water.
Instructional Approach(s): The teacher should present the information on the slide.

13 Clouds form when water vapor condenses and cools in tiny droplets around small particles of dust.
Instructional Approach(s):The teacher should present the information on the slide while the students record the important information on their graphic organizer.

14 Dew Point is the temperature at which air is saturated (full) and condensation forms.
Instructional Approach(s): The teacher should present the information on the slide. The teacher should not focus on the term “dew point”. Use the slide to illustrate that as the water vapor molecules move further up into the atmosphere they begin to cool until they slow down enough to condense.

15 Other Forms of Condensation
Condensation can occur whenever air becomes saturated (holding as much water vapor as it can). Instructional Approach(s): The teacher should present the information on the slide.

16 Other Forms of Condensation
When water vapor molecules suspended in the atmosphere at or near the earth's surface cool and condense, fog can occur. Fog is a cloud next to the surface of the Earth. Instructional Approach(s): The teacher should present the information on the slide while the students record the important information on their graphic organizer.

17 Other Forms of Condensation
Dew forms when water condenses from the air, usually at night, onto cool surfaces near the ground. Frost forms when temperatures are near 0°C. Instructional Approach(s): The teacher should present the information on the slide while the students record the important information on their graphic organizer.

18 Lab/Demonstration of Condensation
Instructional Approach(s): Use 1-2 of the condensation labs/demonstrations [linked on the curriculum map] to reinforce the concept of condensation.

19 Think, Pair, Share: Using your knowledge, explain why condensation occurs on the glass shown below. Instructional Approach(s): Have students turn to a partner and discuss the question on the slide. Partners can be determined by the students or the teacher can provide more specific directions such as turn to the person directly in front/behind you or to the right/left of you, etc. It may be necessary to have a group of three if you have an uneven number of students. Do not allow more than 30 seconds to 1 minute of discussion time. The teacher should be walking around listening and redirecting discussions as needed. The teacher can briefly discuss student responses. *Answer: the ice water in the glass cools the warmer air surrounding it to its “dew point” so the water vapor molecules around the glass condense (change from gas to liquid) on the glass.

20 Condensation Precipitation Water droplets combine and grow too large for the atmosphere to support their weight and the droplets fall. Instructional Approach(s): The teacher should present the information on the slide.

21 Precipitation Condensation
Rain Sleet Snow Hail Air temperature = type of precipitation to form Instructional Approach(s): The teacher should present the information on the slide while the students record the important information on their graphic organizer. Show the animation at the bottom of the slide to illustrate the formation of rain, sleet, and snow. Falling water passes through a layer of freezing air near the surface Water vapor changes directly to a solid because of freezing temperature Water falling in temperatures above freezing Water freezes inside a cloud before it falls. Thunderstorms

22 The atmospheric condition that affects each stage of the water cycle
Condensation Precipitation The atmospheric condition that affects each stage of the water cycle Temperature Instructional Approach(s): The teacher should present the information on the slide while the students record the important information on their graphic organizer.

23 The atmospheric condition that affects each stage of the water cycle
Turn to an elbow partner and discuss how temperature affects each stage of the water cycle. The atmospheric condition that affects each stage of the water cycle Temperature Instructional Approach(s): Students should partner up to discuss how temperature affects each stage of the water cycle. Partners can be determined by the students or the teacher can provide more specific directions such as turn to the person directly in front/behind you or to the right/left of you, etc. It may be necessary to have a group of three if you have an uneven number of students. Do not allow more than 30 seconds to 1 minute of discussion time. The teacher should be walking around listening and redirecting discussions as needed. The teacher can briefly discuss student responses.

24 http://commons. wikimedia. org/w/index. php
Instructional Approach(s): The teacher should use the linked animation to illustrate the concepts of the lesson.

25 Summarizer Instructional Approach(s): Each student should complete the summarizer. The teacher should use the summarizer to determine the level of student mastery and if differentiation is needed.


Download ppt "LEARNING TARGET WATER CYCLE What are the atmospheric conditions needed for various processes of the water cycle to occur? Instructional Approach(s): The."

Similar presentations


Ads by Google