1. 2N® Access Unit RFID
(125kHz or 13.56MHz)

2. VERTICALS 2N® Access Unit RFID Office Residential Industry Education
Government

3. Controller and RFID reader in one
2N® Access Unit RFID
Controller and RFID reader in one
combination of RFID reader and controller
connected via UTP cable to a network
low installation costs
augmentation of additional modules
2N® Access Unit combines door controller and RFID card reader in one complex device connected via UTP cable to the network which significantly decrease the cost of installation labor.
The unit can be augmented with additional modules (e.g. keypad, RFID reader, Bluetooth, Wiegand, etc.), which are appreciated in complicated installations.

4. Advanced event reporting
2N® Access Unit RFID
Advanced event reporting
network security
HTTPS connection
Certificates
802.1X protocol
records downloaded via SysLog
to security guard
To prevent criminals to gain an access to the wiring in order to compromise the device there is a tamper switch inside. It detects tampering attempts and triggers an alarm or sends an to security guard.
Network security is guaranteed by HTTPS connection, certificates and 802.1X protocol that protects the network against hackers.

5. Single cable installation
2N® Access Unit RFID
Single cable installation
easy installation:
PoE power supply
data
periphery
The access control unit can easily be got up and running by people without any installation experience. All without even having to go through intensive training or to pore over cryptic manuals.
All accessories such as REX, magnetic door contact or electrical strike / lock are connected directly to the unit.

6. NFC for door opening opening doors using smartphone
2N® Access Unit RFID
NFC for door opening
opening doors using smartphone
mobile application needed
Free
Available for Android on Google Play
applies to 13.56MHz reader
2N® Access Unit will allow you to open the door not only using an RFID card or key fob, but also using an NFC-enabled smartphones (Android 4.4 and higher).
The only thing you need is 2N® Mobile Key app that is available for free on Google Play
Applies only for 13.56MHz reader!

7. 2N® Access Unit RFID
CONNECTION TOPOLOGY

8. MOUNTING ACCESSORIES 2N® Access Unit RFID RJ45 pigtail Surface frame
916020
Surface frame
Backplate
Flush mount frame
Flush mount box
It is possible to connect almost any module from Helios IP Verso to this unit via Vbus cable as you are used to from current AU

9. ADDITIONAL ACCESSORIES
2N® Access Unit RFID
ADDITIONAL ACCESSORIES
Security Relay
Strike with contact
932061E
Door contact
Exit button
NFC license
916012
It is possible to connect almost any module from 2N IP Verso to this unit via Vbus cable as you are used to from current AU

10. 2N® Access Unit (13.56MHz + NFC)
2N® Access Unit RFID
PRODUCT VARIANTS
2N® Access Unit (125kHz)
916009
2N® Access Unit (13.56MHz + NFC)
916010

11. RFID Card reader (125kHz or 13.56MHz)
2N® Access Unit RFID
EXTENDING MODULES
RFID Card reader (125kHz or 13.56MHz)
Keypad module
Touch Keypad
Fingerprint Reader
It is possible to connect almost any module from Helios IP Verso to this unit via Vbus cable – it allows you to combine different technologies or to have a solution for both side protection of your door
Connection is made via special extension cable (length is 1, 3 or 5m)

12. EXTENDING MODULES 2N® Access Unit RFID Bluetooth module I/O module
I/O module
Extension cable
(1m)
(3m)
(5m)
It is possible to connect almost any module from 2N IP Verso to this unit via Vbus cable – it allows you to combine different technologies or to have a solution for both side protection of your door
Connection is made via special extension cable (length is 1, 3 or 5m)

13. Technical Specification
2N® Access Unit RFID
Technical Specification
Interfaces
Power supply: PoE (802.3af) and/or 12V ±15 % / 2A DC
Passive switch: dry and wet contact, up to 30V/1A AC/DC
Active output: up to 12V DC and 550mA
Inputs: passive / active mode (-30V to +30V DC)
RFID card readers
Supported 13.56MHz cards (only card S/N is read):
ISO/IEC 14443A: Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, Ultralight, Ultralight C
ISO/IEC 14443B: CEPAS, HID iCLASS
JIS X 6319: Felica
ISO/IEC 18092: SmartPhone with NFC/HCE support
Supported 125kHz cards: EM4100, EM4102, HID Prox