1. X-Camme 2010 ML
A easy software for a complex object

2. X-Camme 2010 ML Excel Motion curves Cams type CAD Integration Workshop
The cam is often the principal part of an automatic machine. Design and cutting cams are complex operations. X-Camme was developed the first time for a packaging machines industry and at the same time for a cams cutting workshop
Excel
Motion curves Cams type
CAD Integration
Workshop

3. EXCEL

4. X-Camme is like Microsoft Excel
Home-made software often became "old". So calculation files repository is no more available X-Camme input and output are stored in an Excel xls file, an "officiale" standard for next years for all peoples.

5. Excel: a standard for customizations
X-Camme is a software for cams design and cutting and a frameworks for customization and other software development
Input
Output
Chart
Customization

6. CAMS type

7. Cams type In X-Camme there are classical type of cams Flat radial cam
With Translating Roller Follower,
With Oscillating Roller Follower
With Translating Flat-Faced Follower  
Cylindrical (Barrel) cam
With Translating Roller Follower
With Oscillating Roller Follower  
Globoidal  
Flat oscillating

8. Motion synthesis
You can use x-camme with complex cinematic system, to generate cams profile from last element motion In this case, X-Camme is a motion law generator for Adams, Mechanism or other CAD embedded multibody software.

9. Motion curve

10. More and more motion curves
In X-Camme there is al lot of motion curve: older, newer, standard or user- defined laws.
Simple Polynomial curves (constant velocity (Parabolic Displacement, Cubic Displacement)
trigonometrical Curves (harmonical, cyclidal, elliptcal, biharmonic, mod. trapezoidal, universal 7 steps)
Fourier series (Freudestein, Gutman and Weber)
Polynomial 7 step (SMS-3, SMT-3, SMCV-3)
Polydyne (Dudley , Peisekah)
Polynomial by bondary condition
Spline (fit or control points)
User defined equation

11. CAD INTEGRATION

12. 3D model and 2D draft
The 3D model is used for cinematic and dynamic simulation and for CNC cutting machine programming There is a different procedure to generate CAM in each CAD, because different surface commands

13. thinkDesign
X-Camme is a thinkDesign add-in available in the think3 setup CD The 3D model is made by x-camme completely

14. WORKSHOP

15. From excel to CNC cutting machine
You can save the part program file for CNC from X-Camme You can also customize the part program file (like with a cam post processor)

16. x-camme USERS

17. X-Camme freeware is a global standard
The X-Camme freeware version can calculate only 4 motion step. More than 1400 users from all the word downloaded X-Camme freeware.

18. Some complete version users