1. Collision Observing Detection System
Robert, Rony, Logan, and Nick

2. Overview Project Goal Summary Current Progress Demonstration
Possible Improvements
?????

3. Goals/Motive
To develop a kit to have collision detecting sensors for cars that do not have them already installed
To provide blind spot detection
To provide object detection for parking assistance
To display all information to driver cleanly on an iOS application
To ensure the kit is easy to install on any vehicle

4. Current Status: Sensors
Have created a case that houses 3 sensors connected to Arduino Mega
Two sensors are angled for blind spot detection
One sensor is angled to face directly behind the car for parking assistance
The case attaches to the car with suction cups
The Arduino communicates with the application using Bluetooth
The case is also equipped with a rechargeable power supply

6. Current Status: iOS App
Communicates with Arduino using Bluetooth
Receives the distances each sensor is detecting
Allows the user to see data from sensors by displaying colors on screen
Blind spots: red if object is detected, green if clear
Parking: panel goes from green to red as the car gets closer to an object

8. Demonstration

9. Possible improvements
Add user configurability for sensor ranges
Allow user to incorporate more sensors to the kit
Create a more aerodynamic case
Improve wiring and heat distribution for the sensor apparatus
Android App?

10. QUESTIONS???

11. Thank You