1. Panther II Hybrid Rocket Final Semester Overview
Florida Institute of Technology
January 14, 2008

2. What We’ve Accomplished
Propulsion
Conducted two static test fires of motor
Obtained enough material to make several more fuel grains
Airframe
Conducted multiple fin calculations
Ground Support Equipment
Evaluated Launch Rail modification structural stability
Payload
Designed electronics board
Ordered parts

3. Propulsion Goals Finalize Motor Specifications
Conduct more static test fires
Compare thrust curve to desired trajectory data
Deliver final weight, dimensions, etc. to other subteams
Oversee propulsion components (fuel grain, motor installation, etc.) for all firings

4. Airframe Goals
Finalize Airframe specifications, including body length, fin size, etc.
Order necessary parts
Input airframe parameters into UCAT for trajectory analysis
Construct airframe

5. Ground Support Equipment (GSE)
Rail Modifications:
Finish specifications
Order metal
Machine and construct rail
Rocket support
Obtain and familiarize with necessary tubing, electronics and other ground-based rocket equipment
Oversee all GSE procedures during all launches

6. Payload Complete circuits Assemble payload Code all electronics
Create “dummy” payload
No electronics, but similar weight and dimensions to actual payload
Used for Cape Launch
Launch payload from Palm Bay

7. Launch Goals Develop Test Directive
Detailed procedure and instructions for day of launch
Finalize transportation and all other procedures necessary
Continue discussion with SAIC
Aiming for a mid-year launch, hopefully May!