1. FLOTATION OF PLATINUM GROUP METAL (PGM) ORES

2. PGM Minerals There are over 100 PGM minerals
These minerals are subjected to a wide range of elemenlat substitution
There is a large variation between stochiometric formula and compositions of the given mineral from various locations.
It is common to find these minerals with sulphide deposits
PGM
İdeal Formula
Other Elements Present
Braggite
(PtPd)S
(PtNiPd)S
Cooperite
PtS
Kotulskite
PtTe
(PdPt)(TeBiSb)

3. PGM Deposits PGM concentration should be between 100-1000 ppm
PGM are associated with Cu, Ni and precious metals
Almost all of PGM deposits contain Ni minerals
PGM deposits are classified as;
PGM-dominated deposits
Ni-Cu dominated deposits
PGM-Dominated Deposits
Merensky type
Hydrothermal
Placer

4. PGM Deposits Merensky type Hydrothermal Deposits
Basaltic magma (pyroxene and peridotite zones)
The main sulphides are pyrrhotite, chalcopyrite, pentlandite and pyrite
Rich in floatable silicates (talc) and chromite
Busheld Complex (South Africa), Great Dyke Zone (Zimbabwe), Stillwater Complex (Montana, USA)
Hydrothermal Deposits
Pyroxene and peridotite zones affected by supergene alteration.
The main sulphides in the ore include pyrite, chalcopyrite, pyrrhotite, covellite and marcasite with associations of electrum, pentlandite and PGM.
New Rambler Deposit (Wyoming, USA)

5. PGM Deposits Placer Deposits
Processed in the Soviet Union, Canada, Columbia and the United States.
Alaskan-type ultramafic rocks enriched in PGM, in particular in the vicinity of concentration of chromite and with alpine ultramafic bodies.
As a process of weathering there is a marked change in Pt/(Pt– Pd) ratio
Examples of this include the placer related to the Norilsk sulphide deposits and deposits found in Ural region USSR.

6. Effect of Mineralogy on Selection of Concentration Process
Ores amenable to
gravity preconcentration
Flotation
Hydrometallurgy
Ores Amenable to Gravity Preconcentration
PGM occur as minerals of high density,
High degree of liberation (no middling)
the grain-size distribution suitable for gravity techniques
Placer deposits are suitable for this process
The principal PGM minerals include Pt-Fe alloys (Pt2Fe, (Ir,Pt))

7. Ores Amenable to Flotation
PGM Sulphide Dominated Deposits
PGM are in general associated with base metal sulphides, as grain boundaries between sulphides and silicates, or solid solution.
PGM are recovered in a bulk Cu/Ni/Co/PGM concentrate
In many cases these ore types contain floatable non-opaque gangue minerals, including talc, chlorites, etc.
PGE Dominated Deposits
Low sulphide content and PGM concentration in a range between 5 and 30 g/t.
Merensky Reef of the Bushveld Complex in South Africa.
Stillwater Complex in Montana, USA.

8. Flotation of PGM Ores
PGM carriers (i.e. pyrrhotite, pyrite, pentlandite, etc.) have different flotation properties under some flotation conditions.
The selectivity between sulphide minerals and gangue minerals is important
In the majority of cases, a hydrophobic gangue depressant has to be used.
Pyrrhotite is a relatively slow floating mineral, especially monoclinic pyrrhotite, which is usually present in these ore types.
The floatability of pyrrhotite also decreases when using certain hydrophobic mineral depressants, such as guars and dextrins.
The flotation of pyrrhotite may improve with small additions of copper sulphate (CuSO4).
Chalcopyrite and pentlandite float well using a xanthate collector and in certain operations, the recovery can reach greater than 90%.
Violarite is the least floatable mineral of all the sulphides and represents a major loss of PGM in the flotation tailing from a number of operations.
Reagents:
pH (Natural)=9-10
Collectors: SIBX+Dithiophosphate or Mercaptan
Frothter: DOW250 or similar
Depressant: Guar gum or CMC
Activator: Cu SO4

9. Flotation of Sulphide Dominated Ore

10. High- Chromium PGM Containing Ores

11. Reagent Scheme and Metallurgical Results
Amplats (Merensky Reef, South Africa)
Sulphide-dominated PGM ore composed of Cu, Ni, pyrrhotite and some pyrite.
This ore contains a fair amount of floatable gangue minerals
Grind: P80 of about 105 µm
Reagents:
CuSO4 = 200–300 g/t,
CMC = 200–400 g/t,
Amyl xanthate = 100–250 g/t, dithiophosphate = 40–80 g/t
Metallurgy:
Total PGM concentrate grade = 70–85 g/t,
PGM recovery = 82–85%

12. Reagent Scheme and Metallurgical Results
Barrier Reef Plant (South Africa)
High-chromium PGM ore.
Main gangue minerals are chromite with some silicates, calcite and clay-like slimes
Grind: P80 = 150 μm for stage 1; P80=90μm for stage 2
Regrind: Cleaner tailings
Reagents:
Xanthate mixture = 250–300 g/t; mercaptan = 30–50 g/t;
modified guar = 50–100 g/t;
CuSO4=50–100 g/t
Metallurgy:
Total PGM in concentrate = 80–110 g/t at 2.75% Cr2O3,
PGM recovery = 83%50