1. Preparation of Components for the Mounting of
Max-Planck-Institut für Plasmaphysik, EURATOM Association, TI Greifswald
Preparation of Components for the Mounting of
Wendelstein 7-X
L. Reinke and the W7-X Team
Coil preparation Add-on components are completed
electric insulation
sensors and cables
header
pads
to coat the NSE-area
reflection foil
The components still require some completion works before they can be put together. The different components get an incoming inspection at IPP and then they are completed in the Component-Preparation for the assembly process.
mark of depth for grinding
Narrow – Support – Element
installation of pad and pad frame
burnishing the slide face
to fix the reflection foil
photogrammetry measuring points
installation of sensors and cables
Furthermore, tests and dimensional accuracy, inspection are accomplished
threads
surfaces
fits
mechanical rework
to form tail ends
through flow test of the conductor
An important requirement for the success is the effective cooperation of the different divisions (AS – Assembly, QM – Quality Management, MC – Magnets & Cryostat, DC – Design & Configuration and EN – Engineering).
25th SOFT, Rostock, Germany, 15 – 19 September 2008