1. 3 Effective Methods to Repair the Cracked Plastic Radiator of Car

2. Repairing the cracked radiator is a relatively quick and easy job, but you can save your money by locating the crack and fixing the problem yourself.

3. Various parts of the plastic radiator can leak. The leakage can be arises from the cracked hose or the body of the radiator itself.

4. Before you perform the actual repair of the car, the first thing you need to examine the fittings that can lead to the radiator.

5. In this cases, the leakage is coming from the radiator, put the old clothes on, roll up the sleeves and go through the below steps.

6. Detect the crack

7. The easiest method to detect the cracked radiator by letting the engine running until the temperature is normally high.

8. It will take half an hour before building the pressure and shut off the engine so, the pressure removes the coolant from the crack.

9. Mark cracked area with a marker and wait for the tank to cool down and take the cap off. At last, check the crack is either above or below the coolant level.

10. If it is below the level, drain some coolant until the crack visible. Remove the lower hose cap to drain the radiator tank.

11. Prepare the crack area

12. To clean the crack area pour a little acetone over the toothbrush and start to scrub the crack and its surrounding areas.

13. Once the acetone dissipates, you can continue the scrubbing process until the area is dry and contain no moisture on the surface.

14. For drying the cracked area of the radiator, you can also use the hairdryer and hold it close to the crack.

15. If the moisture is resurfaced again, then you have to keep the blowing over the crack until the place is dry completely.

16. Perform the actual repair

17. You can press the soldering iron against the tie until it begins to melt or just working like a sealant and press the tie to wrap it into the crack.

18. You can slowly move along the cracked area and ensure that it could melt well enough to seal the crack.

19. Keep melting them in one place until the tie and its surrounding areas turn into a hot liquid. Melt the entire crack and wait for the liquid to harden.

20. At last, cut off all the unused area of the tie and fill the coolant in the radiator to complete the test and make sure that the crack is sealed completely.

21. Conclusion

22. To fix the cracked plastic radiator of your car yourself, you need a new found knowledge and a little elbow grease.

23. In this way, you can repair the cracked plastic radiator of your car without taking any professional's help.

24. https://www.greengaragewp.com/ https://www.facebook.com/407gogreen/ https://plus.google.com/1163815442551278 98773