Presentation is loading. Please wait.

Presentation is loading. Please wait.

Central Intravenous Line Placement

Similar presentations


Presentation on theme: "Central Intravenous Line Placement"— Presentation transcript:

1 Central Intravenous Line Placement
Wendy Blount, DVM

2 Practical Hematology Anemia 101 Blood Loss Anemia Hemolysis
Non-Regenerative Anemia Transfusion Medicine Polycythemia Bone Marrow Disease Coagulopathy Central IV Lines Leukophilia Leukopenias Splenic Disease

3 Why Place a Central Line?
When serial blood values are needed. Avoids pain, trauma and bruising Can get blood from a fractious cat without actually touching it Makes repeated blood draws from difficult animals possible Maintains integrity of the veins for easy placement of the next IV catheter

4 Why Place a Central Line?
When do we need serial values? Diabetic ketoacidosis Renal failure requiring diuresis Liver failure hypoproteinemia “mean as a snake” diabetics who need a glucose curve Hemolytic anemia

5 Why Place a Central Line?
When you need central venous access Drugs that are caustic Doxycycline IV Diazepam CRI fro severe seizures Total Parenteral Nutrition (TPN) Partial Parenteral Nutrition (PPN) Monitoring Central Venous Pressure (CVP) CVP = pressure in the RA When giving IV fluids to dogs with right congestive heart failure

6 Why Place a Central Line?
Central Venous Pressure Normal 5-8 cm H20 in dogs 2-3 cm H20 in cats Increased CVP can result in signs of right heart failure >10 cm in dogs >8 cm in cats Trends are probably more important than absolute values Approximated by caval bounce on AFAST® DH view

7 Why Place a Central Line?
Central Venous Pressure Approximated by caval bounce on AFAST® DH view Normal caval bounce is 50% Poor filling with less bounce is “flat” Distension without bounce is “fat”

8 Why Place a Central Line?
Central Venous Pressure

9 Videos Medial saphenous in a cat
Through the needle catheter w/ clam shell

10 Stephen Garner Nacogdoches TX

11 Videos Jugular vein in the dog Seldinger Guidewire Technique

12 Videos Jugular vein in the dog Seldinger Guidewire Technique
J1040 – 20g x 8cm J1040A – 20g x 13cm J1041 – 18g x 8cm J1041A – 18g x 13cm J1042 – 16g x 13cm J1042A – 16g x 20cm J1043, J1043A Also Double Lumen and Triple Lumen caths

13 Videos Jugular vein in the dog Tear Away Introducer Technique

14 Videos Jugular vein in the dog Tear Away Introducer Technique
J1437 – 20g x 5inch J1437A – 18g x 6cm J1437B – 18g x 8cm J1437C – 18g x 12cm J1437D – 16g x 8cm J1437E – 16g x 12cm Also Double Lumen caths

15 Around the Needle Catheter
AngioCath® style Standard Teflon large bore IV catheter – gauge x 3-4 inches Smaller for kittens, puppies, toy breeds J0457A – Pebax® 14g x 5.5inch J0457B – Pebax® 10g 5.5inch

16 Around the Needle Catheter
AngioCath® style J0458A – polyurethane 14g x 5.25 inch J0458B – polyurethane 16g x 5.25 inch J0458C – polyurethane 16g x 3 inch J0458D – polyurethane 14g x 3.5 inch J0458E – polyurethane 12g x 5.25 inch J0458F – polyurethane 18g x 2.5 inch

17 Around the Needle Catheter
Place the pet in lateral or dorsal recumbency and prep the jugular furrows If you wish, make a stab incision through skin, just medial or lateral to one of the jugular veins

18 Around the Needle Catheter
This helps if dehydrated or hypovolemic Pass the stylet with catheter into the jugular vein Attach syringe to minimize blood spillage

19 Around the Needle Catheter
Advance catheter into the jugular vein

20 Around the Needle Catheter

21 Around the Needle Catheter
Attach extension set, so you can disconnect without disturbing bandage I prefer luer lock extension sets J0467S, J0467Z J1317C

22 Around the Needle Catheter
Tape or suture catheter to the skin Recover from sedation Bandage Antibiotic dressing Cast padding Roll gauze Vetrap

23 Shielded Through Needle Cath
Intracath – 16-22G Venocath – 17G or 19G

24 Shielded Through Needle Cath
J – 20g x 32cm J – 18g x 45cm J – 16g x 32cm

25 Shielded Through Needle Cath
Three layers: Guide wire stylet (inner most) Polypropylene catheter Needle stylet (outer most) Needle Guard Clamps around the needle like a clamshell, to keep the needle from cutting the catheter in half

26 Shielded Through Needle Cath
Occlude jugular vein at thoracic inlet Insert the needle stylet into the vein With the catheter and bag attached (below) Or with the catheter and bag detached

27 Shielded Through Needle Cath
When you are in the vein: See “flash” up the catheter if it is attached Blood out the needle stylet if not attached

28 Shielded Through Needle Cath
Stop occluding the jugular vein Decreases flow of blood out the hub if bag not attached Thread the catheter by “milking it” through the sterile bag, or threading it into the open needle hub Thread in at least 3-4 inches in a small dog or cat – to the 4th ICS All the way in if dog is big enough To the right atrium, or least well into the thoracic inlet

29 Shielded Through Needle Cath
Place a 4x4 gauze at the venipuncture site an apply gentle pressure Withdraw the needle, leaving the catheter in place. Remove the protective bag Seat the catheter hub firmly into the needle stylet hub I like to use a drop of tissue glue to secure them together If there is movement here, the catheter can be sheared off the hub

30 Shielded Through Needle Cath
Apply the needle guard Secure closed with white tape Remove the wire stylet MAKE SURE the cath & needle hubs are attached (b attached to c) to each other before the stylet (a) is removed If not, you can remove the catheter (b) with the stylet (a) by mistake

31 Shielded Through Needle Cath
attach a 10-12cc syringe filled with saline or LRS Flush to make sure the catheter is patent Aspirate to make sure catheter is patent flush and aspirate about every minute, to make sure catheter is still patent and not kinked, while wrapping

32 Securing the Catheter The external part of the catheter should be placed just behind the ear

33 Securing the Catheter Place a white tape butterfly on the needle guard
Secures the needle guard closed Used to suture the guard to the skin I don’t use the suture holes in the needle guard Vetafil 2-0 or other Non- absorbable suture

34 Securing the Catheter

35 Securing the Catheter Place a small square of gauze with antibiotic ointment over the venipuncture site Change this every 2-3 days

36 Securing the Catheter Place ¼-1/2 inch padding between the needle guard and the skin Cotton, gauze or cast padding - prevents sores Be careful not to kink the catheter here

37 Securing the Catheter free flow kink

38 Securing the Catheter REMEMBER, you are flushing and aspirating every minute or so as you go, with syringe full of saline attached to the catheter hub Secure catheter to the neck with full circle white tape Clip a “bridle path” in the fur if needed

39 Securing the Catheter Attach the catheter hub to the outer layer of roll gauze with “split” white tape

40 Securing the Catheter Outer layer of Vetrap Cut hole over catheter
Can completely cover catheter with another loop of Vetrap when not in use.

41 Securing the Catheter Attach the catheter hub to the outer layer of Vetrap with “split” white tape

42 Securing the Catheter These photos show bandaging while anesthetized.
If sedation is required, I prefer to tape while sedated, then finish the bandage after awake and sitting sternal This prevents a bandage that is too tight

43 Kitty and Kanine Kollars
J1085X – xsmall – 4-7 lbs – 4-7 inch neck J1085 – petite – 6-9 lbs – 8-9 inch neck J1085A – small – lbs – inch neck J1085B – medium – lbs – inch neck J1085C – large – lbs – inch neck J1085D – xlarge – lbs – inch neck J1085P – 24 protector pads

44 Susan Johnson McDade TX

45 Taking Blood Samples Disconnect IV fluid line and cap
Flush the catheter with heparinized 3-5 cc saline Gently withdraw 5-6 cc of blood (dump syringe) Gently withdraw needed sample All values except platelets will be accurate Gently replace 5-6cc of blood in “dump syringe” Flush the catheter with 3-5cc saline

46 CVP Measurement Equipment Needed Flush patient’s IV catheter
Bag of fluids Fluid administration set IV extension set Three-way stopcock Manometer If you don’t have a manometer, you can tape IV tubing to a ruler with cm marks on it Flush patient’s IV catheter Fill the IV extension set with fluid Connect the IV extension set To patient jugular catheter at one end To 3-way stopcock at the other end (side) Stopcock off to patient

47 CVP Measurement

48 CVP Measurement Connect manometer to 3-way stop-cock (top)
This connection is the weakest point Support the manometer when turning the stopcock Connect the IV set and fill the line with fluids One end to the fluid bag (one side) The other end to the stopcock (other side)

49 CVP Measurement Turn the stopcock off to manometer, and make sure fluid flows freely into the patient Turn stopcock off to patient, and fill manometer with fluid to at least cm Make sure no air bubbles, which could cause vapor lock

50 CVP Measurement Patient should be in sternal or lateral recumbency
Place the -0- on the manometer at the level of the right atrium Midway between dorsal and ventral If in lateral recumbency

51 CVP Measurement Turn stopcock off to fluids, and allow fluid to fall until it rests at the patient’s CVP The meniscus will oscillate up and down as the heart beats and the patient breathes

52 Acknowledgements Maeckelbergh VA, Acierno MJ. Comparison of prothrombin time, activated partial thromboplastin time, and fibrinogen concentration in blood samples collected via an intravenous catheter versus direct venipuncture in dogs. Am J Vet Res 2008; 69:868–873.


Download ppt "Central Intravenous Line Placement"

Similar presentations


Ads by Google