Presentation is loading. Please wait.

Presentation is loading. Please wait.

Population Genetic Calculations

Similar presentations


Presentation on theme: "Population Genetic Calculations"— Presentation transcript:

1 Population Genetic Calculations
Dr. Nichols Coronado HS

2 Fitness A fundamental concept in evolutionary theory is “fitness”, which can defined as the ability to survive and reproduce. Reproduction is key: to be evolutionarily fit, an organism must pass its genes on to future generations. Basic idea behind evolution by natural selection: the more fit individuals contribute more to future generations than less fit individuals. Thus, the genes found in more fit individuals ultimately take over the population. Natural selection requires 3 basic conditions: 1. there must be inherited traits. 2. there must be variation in these traits among members of the species. 3. some inherited traits must affect fitness

3 Genetics of Populations
A “population” is a group of organisms of the same species that reproduce with each other. There is only one human population: we all interbreed. The “gene pool” is the collection of all the alleles present within a population. We are mostly going to look at frequencies of a single gene, but population geneticists generally examine many different genes simultaneously.

4 Allele and Genotype Frequencies
Each diploid individual in the population has 2 copies of each gene. The allele frequency is the proportion of all the genes in the population that are a particular allele. The genotype frequency of the proportion of a population that is a particular genotype. For example: consider the MN blood group. In a certain population there are 60 MM individuals, 120 MN individuals, and 20 NN individuals, a total of 200 people. The genotype frequency of MM is 60/200 = 0.3. The genotype frequency of MN is 120/200 = 0.6 The genotype frequency of NN is 20/200 = 0.1 The allele frequencies can be determined by adding the frequency of the homozygote to 1/2 the frequency of the heterozygote. The allele frequency of M is 0.3 (freq of MM) + 1/2 * 0.6 (freq of MN) = 0.6 The allele frequency of N is /2 * 0.6 = 0.4 Note that since there are only 2 alleles here, the frequency of N is 1 - freq(M).

5 Heterozygosity and Polymorphism
A gene is called “polymorphic” if there is more than 1 allele present in at least 1% of the population. Genes with only 1 allele in the population are called “monomorphic”. Some genes have 2 alleles: they are “dimorphic”. In a study of white people from New England, 122 human genes that produced enzymes were examined. Of these, 51 were monomorphic and 71 where polymorphic. On the DNA level, a higher percentage of genes are polymorphic. Heterozygosity is the percentage of heterozygotes in a population. Averaged over the 71 polymorphic genes mentioned above, the heterozygosity of this population of humans was

6 Hardy-Weinberg Equilibrium
Early in the 20th century G.H. Hardy and Wilhelm Weinberg independently pointed out that under ideal conditions you could easily predict genotype frequencies from allele frequencies, at least for a diploid sexually reproducing species such as humans. For a dimorphic gene (two alleles, which we will call A and a), the Hardy-Weinberg equation is based on the binomial distribution: p2 + 2pq + q2 = 1 where p = frequency of A and q = frequency of a, with p + q = 1. p2 is the frequency of AA homozygotes 2pq is the frequency of Aa heterozygotes q2 is the frequency of aa homozygotes

7 Hardy-Weinberg Example
Taking our previous example population, where the frequency of M was 0.6 and the frequency of N was 0.4. p2 = freq of MM = (0.6)2 = 0.36 2pq = freq of MN - 2 * 0.6 * 0.4 = 0.48 q2 = freq of NN = (0.4)2 = 0.16 These H-W expected frequencies don’t match the observed frequencies. We will examine the reasons for this soon.

8 Necessary Conditions for Hardy-Weinberg Equilibrium
The relationship between allele frequencies and genotype frequencies expressed by the H-W equation only holds if these 5 conditions are met. None of them is completely realistic, but all are met approximately in many populations. If a population is not in equilibrium, it takes only 1 generation of meeting these conditions to bring it into equilibrium. Once in equilibrium, a population will stay there as long as these conditions continue to be met. 1. no new mutations 2. no migration in or out of the population 3. no selection (all genotypes have equal fitness) 4. random mating 5. very large population

9 Testing for H-W Equilibrium
If we have a population where we can distinguish all three genotypes, we can use the chi-square test once again to see if the population is in H-W equilibrium. The basic steps: 1. Count the numbers of each genotype to get the observed genotype numbers, then calculate the observed genotype frequencies. 2. Calculate the allele frequencies from the observed genotype frequencies. 3. Calculate the expected genotype frequencies based on the H-W equation, then multiply by the total number of offspring to get expected genotype numbers. 4. Calculate the chi-square value using the observed and expected genotype numbers. 5. Use 1 degree of freedom (because there are only 2 alleles).

10 Japanese Blood Type Personality Chart
Type A Best Traits Conservative, reserved, patient, punctual, perfectionist and good with plants. Worst Traits Introverted, obsessive, stubborn, self conscious, and uptight Type B Creative and passionate. Animal loving. Optimistic and flexible Forgetful, irresponsible, individualist Type AB Cool, controlled, rational. Sociable and popular. Empathic Aloof, critical, indecisive and unforgiving Type O Ambitious, athletic, robust and self-confident. Natural leaders Arrogant, vain and insensitive. Ruthless My Boyfriend is Type B in Korean, written and directed by Choi Seok-Won

11 Example Wild oats is a common plant in California, the cause of the golden-brown hillsides all summer out there. Wild oats can pollinate itself, but the pollen also blows in the wind so it can cross fertilize. The task is to estimate the relative proportions of these two types of mating. Data for the phosphoglucomutase (Pgm) gene: 104 AA, 9 AB, 42 BB = 155 total individuals H-W calculations: freq of A = /2 * 9 = / 155 = 0.7 freq of B = 1 - freq(A) = 0.3 exp heterozygotes = 2pq = 2 * 0.7 * 0.3 = 0.42 (freq) * 155 = 65.1 F = 1 -(obs hets) / (exp hets) = / 65.1 = F = 0.84 This is a very inbred population: most matings are self-pollination.

12 Inbreeding Depression and Genetic Load
For most species, including humans, too much inbreeding leads to weak and sickly individuals, as seen in this example of mice inbred by brother-sister matings. Inbreeding depression is caused by homozygosity of genes that have slight deleterious effects. It has been estimated that on the average, each human carries 3 recessive lethal alleles. These are not expressed because they are covered up by dominant wild type alleles. This concept is called the “genetic load”. However, it has been argued that some amount of inbreeding is good, because it allows the expression of recessive genes with positive effects. The level of inbreeding in the US has been estimated (from Roman Catholic parish records) at about F = , which is approximately equivalent to each person mating with a fifth cousin. gen litter size % dead by 4 weeks 7.50 3.9 6 7.14 4.4 12 7.71 5.0 18 6.58 8.7 24 4.58 36.4 30 3.20 45.5

13 Mutation Mutation is unavoidable. It happens as a result of radiation in the environment: cosmic rays, radioactive elements in rocks and soil, etc., as well as mutagenic chemical compounds, both natural and artificially made, and just as a chance event inherent in the process of DNA replication. However, the rate of mutation is quite low: for any given gene, about 1 copy in is a new mutation. Mutations provide the necessary raw material for evolutionary change, but by themselves new mutations do not have a measurable effect on allele or genotype frequencies.

14 Migration Migration is the movement of individuals in or out of a population. Migration is necessary to keep a species from fragmenting into several different species. Even as low a level as one individual per generation moving between populations is enough to keep a species unified. Migration can be thought of as combining two populations with different allele frequencies and different numbers together into a single population. After one generation of random mating, the combined population will once again be in H-W equilibrium.

15 Migration Examples Population X has 20 individuals with frequency of the A allele = Population Y has 10 individuals with frequency of the A allele = The two populations mix. What is the frequency of A in the final population? There are = 30 individuals in the final population, for a total of 60 copies of the gene. For population X, 40 * 0.8 = 32 copies are A, and 8 are a. For population Y, 20 * 0.2 = 4 copies are A, and 16 are a. Adding these together, the final population has = 36 A alleles and = 24 a alleles. Out of 60 alleles, the frequency of A is 36/60 = 0.6 A real example: African Americans have a large proportion of African ancestry, but also some European ancestry. The Duffy blood group has an allele with a frequency of 0 among West African populations, and an average frequency of 0.43 among European populations. Other blood groups can also be used in this technique: very little assortative mating occurs on the basis of blood group. In Oakland CA, African-Americans are reported to have about 22% European ancestry In Charleston South Carolina, the proportion is about 3.7%

16 Selection Selection is the primary factor driving evolution. Genes that confer increased fitness tend to take over a population. Note that random events also play a big factor: sometimes a “good” gene is lost due to chance events. Also, a gene that confers increased fitness in one environment may confer decreased fitness in another environment. Selection can occur at many places in the life cycle: the embryo might be defective, the fetus might not survive to birth, the immature offspring might be killed, the individual might not be able to find a mate or might be sterile. We will simplify all of this by assuming that the gametes are produced at random and combine at random, to produce a population of zygotes in H-W equilibrium. Then, we will apply selection to the zygotes, killing off different proportions of the different genotypes. Fitness is a function of the genotype. We will define the “relative fitness” of the best genotype as equal to 1.0, and the fitnesses of the two other genotypes as equal to or less than 1.

17 Selection Against Recessive Homozygote
This situation is what happens with a recessive genetic disease. Heterozygotes and dominant homozygotes are indistinguishable and have the same relative fitness: The recessive homozygote has the genetic disease and a fitness less than 1. The exact fitness depends on the nature of the disease. Start with a population where p = 0.6 and q = 0.4, and assume that the aa homozygote has a relative fitness of 0.1 (i.e. 90% of the aa offspring die without reproducing). The zygotes produces (in H-W equilibrium) are 0.36 AA, 0.48 Aa, and 0.16 aa. Selection on the zygotes reduces the aa’s by 90%, to However, proportions must add to 1.0, so we divide each proportion by a correction factor. The correction factor is the sum of the remaining proportions: = So, after selection, the frequency of AA is 0.36 / = The frequency of Aa is 0.48 / = The frequency of aa is / = Final allele frequencies: A = /2 * 0.56 = a = 1 - freq(A) = 0.3.

18 Selection Favoring the Heterozygote
Some genes maintain 2 alleles in the population by having the heterozygote more fit than either homozygote. An example is HbS, the sickle cell hemoglobin allele. In rural West Africa, where malaria is endemic and medical support is rudimentary, the relative fitness of the HbA homozygote is estimated at 0.85, due to susceptibility to malaria. The relative fitness of the HbS homozygote is estimated at approximately 0, with almost none reaching reproductive age due to sickle cell disease. The heterozygote is the most fit, so it given a relative fitness of Under these conditions, it is possible to predict an equilibrium frequency of the HbS allele of about This is approximately what is seen in various West African countries.

19 Genetic Drift Genetic drift is the random changes in allele frequencies. Genetic drift occurs in all populations, but it has a major effect on small populations. For Darwin and the neo-Darwinians, selection was the only force that had a significant effect on evolution. More recently it has been recognized that random changes, genetic drift, can also significantly influence evolutionary change. It is thought that most major events occur in small isolated populations. Simple example: A population of 1 female and 2 males, where the female chooses only 1 male to mate with. Assume that the female has the Aa genotype, male #1 is AA, and male #2 is aa. initially the allele frequencies are 0.5 A and 0.5 a if male #1 gets to mate, the offspring will have a 0.75 A, 0.25 a frequency if male #2 mates, the offspring will be 0.25 A and 0.75 a.

20 Fixation of Alleles Genetic drift causes allele frequencies to fluctuate randomly each generation. However, if the frequency of an allele ever reaches zero, it is permanently eliminated from the population. The other allele, whose frequency is now 1.0, is “fixed”, which means that all individuals in the population will be homozygous for that allele. This continues for all future generations (in the absence of mutation). The average rate at which alleles become fixed is a function of the population size. The larger the population, the longer it takes for fixation to occur.

21 Population Bottlenecks and Founder Effect
Bottlenecks and the founder effect are closely related phenomena. Founder effect: If a small group of individuals leaves a larger population and develops into a separate, isolated population, the allele frequencies in the new population are determined by the allele frequencies in the founders. Since these frequencies are probably different from those found in the general population, the new population will have a different set of frequencies. This is especially true for rare alleles, which can suddenly become prominent if one of the founders has the rare allele.

22 Founder Effect Example
Founder effect example: the Amish are a group descended from 30 Swiss founders who renounced technological progress. Most Amish mate within the group. One of the founders had Ellis-van Crevald syndrome, which causes short stature, extra fingers and toes, and heart defects. Today about 1 in 200 Amish are homozygous for this syndrome, which is very rare in the larger US population. Note the effect inbreeding has here: the problem comes from this recessive condition becoming homozygous due to the mating of closely related people.

23 Bottlenecks A population bottleneck is essentially the same phenomenon as the founder effect, except that in a bottleneck, the entire species is wiped out except for a small group of survivors. The allele frequencies in the survivors determines the allele frequencies in the population after it grows large once again. Example: Pingalop atoll is an island in the South Pacific. A typhoon in 1780 killed all but 30 people. One of survivors was a man who was heterozygous for the recessive genetic disease achromatopsia. This condition caused complete color blindness. Today the island has about 2000 people on it, nearly all descended from these 30 survivors. About 10% of the population is homozygous for achromatopsia This implies an allele frequency of about 0.26.

24 Human Bottleneck The human population is thought to have gone through a population bottleneck about 100,000 years ago. There is more genetic variation among chimpanzees living within 30 miles of each other in central Africa than there is in the entire human species. The tree represents mutational differences in mitochondrial DNA for various members of the Great Apes (including humans).


Download ppt "Population Genetic Calculations"

Similar presentations


Ads by Google