Presentation is loading. Please wait.

Presentation is loading. Please wait.

Manufacturing Unit 5, Lesson 2 Explanation Presentation 5.2.1

Published bySimon Hutchinson Modified over 6 years ago

Similar presentations

Presentation on theme: "Manufacturing Unit 5, Lesson 2 Explanation Presentation 5.2.1"— Presentation transcript:

1 Manufacturing Unit 5, Lesson 2 Explanation Presentation 5.2.1
© 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

2 The Unit Big Idea The designed world is the product of a design process, which provides ways to turn resources - materials, tools and machines, people, information, energy, capital, and time - into products and services. © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

3 The Lesson Big Idea Manufacturing technologies produce quality goods at low prices, and apply the properties of materials to ensure the desired function of a product. © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

4 Material Properties The physical properties of the material are a basic reason for selecting the material The performance of a product requires various behaviors and types of properties. Example, a material could have particularly desirable electrical conductivity properties and perform poorly in maximum strength. © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

5 Material Properties Often a compromise/trade-off among the needed properties must be made To be consistent with the processing selected And the structural state desired or possible. © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

6 Categories of Materials
Materials can be categorized as the following: Metals Ceramics Plastics Semiconductors Composites © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

7 Metals Materials that are normally combinations of metallic elements.
Elements, when combined, have electrons that are non-localized, As a consequence, have generic types of properties. © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

8 Metals Metals are good conductors of heat and electricity.
Quite strong, but malleable Lustrous look when polished. Examples: copper, aluminum, titanium © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

9 Ceramics Compounds between metallic and nonmetallic elements
Include such compounds as oxides, nitrides, and carbides. They are insulating and resistant to high temperatures and harsh environments. Examples: clay, tungsten carbide, alumina, glass © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

10 Plastics & Polymers Organic compounds based upon carbon and hydrogen.
Very large molecular structures. Low density, not stable at high temperatures. Two types: Thermoset (can be melted and shaped once) Thermoplastic (can be melted and reshaped) Examples: nylon, polystyrene, rubber © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

11 Semiconductors Electrical properties intermediate between metallic conductors and ceramic insulators. Electrical properties are strongly dependent upon small amounts of impurities. Examples: silicon, germanium © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

12 Composites Composites consist of more than one distinct material type.
Examples: Fiberglass, a combination of glass and a polymer, concrete, plywood © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

13 Reflection Think about where you are sitting. What types of materials are surrounding you? Is your computer, laptop, or cell phone made of more than one type of material? © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

14 Properties of Materials
Properties of Materials can be categorized: Mechanical Electrical Magnetic Optical and Dielectric Thermal © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

15 Mechanical Properties
Tensile strength: measuring of resistance to being pulled apart Fracture toughness: the ability of a material containing a crack to resist fracture Fatigue strength: ability of material to resist various kinds of rapidly changing stresses Creep strength: ability of a metal to withstand a constant weight or force at elevated temperatures Hardness: property of a material to resist permanent indentation © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

16 Electrical Properties
Conductivity: measure of how well a material accommodates the movement of an electric charge Resistivity: opposition of a material to the flow of electrical current © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

17 Magnetic Properties Magnetic susceptibility : ratio of magnetization (M) to magnetic field (H) Curie temperature : temperature at which a material will lose magnetism Saturation magnetization: state reached when an increase in applied external magnetizing field H cannot increase the magnetization of the material further © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

18 Thermal Properties Coefficient of thermal expansion: how much a material will expand for each degree of temperature increase Heat capacity: amount of heat required to change a material’s temperature by a given amount Thermal conductivity: indicates a material’s ability to conduct heat © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

19 Manufacturing How do we apply the properties of materials?
Engineers use the material properties to select appropriate materials for product production. © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

20 Manufacturing Processes
Primary processes Turn raw materials into standard stock (timber cut into boards) Secondary processes Turn standard stock into finish products (boards turned into furniture) © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

21 Manufacturing Types Final manufactured Products can be one of three types: Custom Batch Continuous © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

22 Custom Manufacturing One of kind item made by a specialist
Product examples: yacht, clothing, purse © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

23 Batch Manufacturing Products are made in batches.
The components of a product are completed at a workstation before they move to the next one. Product Examples: bakery items, paints, special edition shoes © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

24 Continuous Manufacturing
Products are made with no interruption to the production line from the input to output. Product examples: cars, food products, bricks © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

25 Interchangeable Parts
The invention of interchangeable parts in the 1700s innovated manufacturing. Interchangeable parts are parts that are identical, meaning to replace the part, you do not have to make a custom piece. There is already one the same size. © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

26 Interchangeable Parts
The interchangeability of parts increased the effectiveness of all manufacturing processes. An example would be a windshield wiper blade that can be used on multiple vehicle models. © 2011 International Technology and Engineering Educators Association, STEMCenter for Teaching and Learning™ Foundations of Technology ©International Technology Education Association Center to Advance the Teaching of Technology & Science Engineering byDesign™

Download ppt "Manufacturing Unit 5, Lesson 2 Explanation Presentation 5.2.1"

Similar presentations

These aren’t really ‘properties’ – more like definitions that relate to what’s happening microscopically. The goal here is to relate structure to properties.

These aren’t really ‘properties’ – more like definitions that relate to what’s happening microscopically. The goal here is to relate structure to properties.
TED 316 – Structural Design

TED 316 – Structural Design
1 ) ) Kingdom of Saudi Arabia, Ministry of Higher Education, Jazan University, Preparatory Year Deanship. Practical Production Tech. & Workshop.

1 ) ) Kingdom of Saudi Arabia, Ministry of Higher Education, Jazan University, Preparatory Year Deanship. Practical Production Tech. & Workshop.
Modern Composite Material A material that is made from two or more constituents for added strength and toughness  Glass reinforced plastic (GRP)  Carbon.

Modern Composite Material A material that is made from two or more constituents for added strength and toughness  Glass reinforced plastic (GRP)  Carbon.
Introduction to Materials

Introduction to Materials
Materials.

Materials.
Design for Engineering Unit 8 Material Science and Engineering

Design for Engineering Unit 8 Material Science and Engineering
PHYSICAL PROPERTIES OF MATERIALS Chapter 3. Density Melting point Specific heat Thermal conductivity Thermal expansion Electrical properties Magnetic.

PHYSICAL PROPERTIES OF MATERIALS Chapter 3. Density Melting point Specific heat Thermal conductivity Thermal expansion Electrical properties Magnetic.
Material Science and Materials Processing (Day 1) Class

Material Science and Materials Processing (Day 1) Class
Course Name : Material Science

Course Name : Material Science
Selection Criteria Properties Availability Cost Manufacturability

Selection Criteria Properties Availability Cost Manufacturability
Ceramics Mixture of metallic and non-metallic elements (clay products). Traditional: whiteware, tiles, brick, sewer pipe, pottery, and abrasive wheels.

Ceramics Mixture of metallic and non-metallic elements (clay products). Traditional: whiteware, tiles, brick, sewer pipe, pottery, and abrasive wheels.
Chapter 9 Characteristics of Metallic Materials. Objectives Four major classifications – ferrous,non ferrous, high temperature super alloy, and refractories.

Chapter 9 Characteristics of Metallic Materials. Objectives Four major classifications – ferrous,non ferrous, high temperature super alloy, and refractories.
Materials - Metals Ken Youssefi PDM I, SJSU.

Materials - Metals Ken Youssefi PDM I, SJSU.
Answer the following in complete sentences: 1.How is controlling light useful to humans? Provide 2 examples in your answer. 2.What are two biotechnologies.

Answer the following in complete sentences: 1.How is controlling light useful to humans? Provide 2 examples in your answer. 2.What are two biotechnologies.
Forging new generations of engineers. Organics Metals and Alloys Polymers Ceramics Composites.

Forging new generations of engineers. Organics Metals and Alloys Polymers Ceramics Composites.
Selection Criteria Properties Availability Cost Manufacturability

Selection Criteria Properties Availability Cost Manufacturability
Manufacturing materials – IE251 Chapter 1 Chapter 1, Slide 1 IE 251 Manufacturing matesrial l Instructor: Dr. Mohamed Ali Eissa Saleh s Room: …………....

Manufacturing materials – IE251 Chapter 1 Chapter 1, Slide 1 IE 251 Manufacturing matesrial l Instructor: Dr. Mohamed Ali Eissa Saleh s Room: …………....
1 Properties of materials. 2 Classes of Materials Materials are grouped into categories or classes based on their chemical composition. Material selection.

1 Properties of materials. 2 Classes of Materials Materials are grouped into categories or classes based on their chemical composition. Material selection.
Fundamentals of Material Science and Engineering - Introduction Engr. Lina D. dela Cruz Chemical Engineering Department Technological Institute of the.

Fundamentals of Material Science and Engineering - Introduction Engr. Lina D. dela Cruz Chemical Engineering Department Technological Institute of the.

Similar presentations

Ads by Google