1. H EAT P IPE / H EAT E XCHANGERS -By Maniks http://www.maniks.com/heat-pipe-heat-exchangers.html

2. H EAT P IPE Introduction  Maniks Heat Pipe?  What are Heat Pipes/Heat Exchangers?  Working Principle  Working of Maniks Heat Pipe  Why Maniks?  Heat Pipes in Various IndustriesWhy Maniks’s Heat Pipe?  Heat Pipe Applications http://www.maniks.com/heat-pipe-heat-exchangers.html

3. H EAT P IPE  Maniks Heat Pipe : http://www.maniks.com/heat-pipe-heat-exchangers.html

4. What are Heat Pipes/Heat Exchangers? Heat pipe is Heat transfer devices. They are Hollow cylindrical pipes, filled with a small/little amount of working fluid that evaporates to produce heat.Heat pipe This heat then rejected from another end for its application on various industrial processes. For example, heat pipe is used in Air Conditioning and Refrigeration application. A heat pipe is a closed evaporator-condenser cylindrical system sealed under vacuum with a small amount of working fluid. http://www.maniks.com/heat-pipe-heat-exchangers.html

5.  Working Principle: The working of a heat pipe is base on the principles of Thermal Conductivity and Phase Transfer. Basically heat pipe is a closed tube with an internal wick material and small amount of working fluid of which one end situated is in the heat generation section and other end at heat dissipation area. Heat transfer is done by high thermal conductivity and dissipation is done to desired location by using the phenomena known as “ capillary action”. http://www.maniks.com/heat-pipe-heat-exchangers.html

6.  Heat Pipe Working :  Maniks heat pipe is constructed with a wick or capillary structure, a working fluid and a vacuum sealed tube.  One end of the pipe is kept in the heat generating area and other end will be operating as a condensation or heat dissipation unit.  The wick structure lines the inner surface of the heat pipe and is saturated with the working fluid.  The wick structure plays very important role to perform capillary action for heat transfer process. http://www.maniks.com/heat-pipe-heat-exchangers.html

7. Why Maniks? ManiksManiks is a traditional supplier of electromechanical devices since last three decades. They have proven their prominence for contribution in heat pipes repeatedly. Maniks products are always with the best quality and performance. Following points will help us to know how Maniks heat pipe is a better choice. Heat pipes have lot many advantageous points over the conventional thermal pipes they are as follows High Thermal Conductivity (10,000 to 100,000 W/m K) Reliable Passive operation Low Cost Shock/Vibration tolerant Freeze/thaw tolerant

8. Heat Pipes in Various Industries:  Electronics and Electrical devices cooling: Heat pipes are used to cool transistors and high density semiconductors by extraction of heat from these devices.  Heat Exchangers: Power industries use heat pipe heat exchangers as air heaters on boilers.  Aerospace applications: Heat pipes have also proven in aerospace applications that transmit thermal energy at rates millions of times greater and with a superior energy-to-weight ratio which can be gained from the most efficient solid conductor.  Other applications: Production, medicine and human body temperature control, engines and automotive industry etc. http://www.maniks.com/heat-pipe-heat-exchangers.html

9.  Heat Pipe Applications:  Apart from above applications heat pipes have been used in the following areas  Waste Heat Recovery from Air Conditioners  Heat Pipe Air Preheaters for BoilersAir Preheaters  Waste Heat Boilers to Recovery Heat  Heat Recovery at the Kiln Furnace  Spray Drying http://www.maniks.com/ http://www.maniks.com/heat-pipe-heat-exchangers.html