1. Specification of Control Board
Model Name : FCB203WUT
Revision 1.0
RoHS Compliant
Copyright ⓒ FlatGate Co., Ltd
All Rights Reserved.

2. CONTENTS
1. Features
2. General Description
3. Block Diagram
4. Dimension ~6
5. Pin Information ~8
6. Reference Data
7. Setup for Operation (OSD)
8. Firmware Version Change
9. Panel Tuning

3. 1. FEATURES 2. GENERNAL DESCRIPTION
• State of the art high performance picture quality and low cost design
• Analog RGB, DVI(option)
• Full CRT multi-sync monitor compatibility
• Multi-sync capability up to Full-HD 60Hz,compatible standard DOS, VGA,SVGA
, XGA and SXGA VESA timing
• Expand DOS, VGA, SVGA and XGA to full screen display
• True color(16.7M) data processing and display driving
• Single control operated On-Screen-Display(hereafter “OSD”) user interface
• Full control of all relevant display and interface parameters via OSD Multi language support
• VESA DDC 1/2B compliant
• Compatible with VESA DPMS power saving modes
• Small form factor: 110 x 100 mm
• +12V/3A DC Single Power: 36 watts AC/DC power adapter recommended
• Operating temperature: 0 to 65℃
2. GENERNAL DESCRIPTION
This FCB203WUT( TTL, LVDS Version ) board is an advanced TFT-LCD Monitor Control Board, which enables a full replacement of conventional CRT monitor with a large size Active Matrix LCD module.
This board, a single layer circuit board, is suitable for video resolution up to Full 60Hz in all video modes and the display area of the module is fully used.
As this model is designed to act as a full monitor interface and to support various TFT-LCDs
under the Full HD resolution by BIOS option, the customers can line up their monitors with their
own identity. Besides the main function of analog/digital converting in this board the various
appealing On-Screen-Display Menu layout is also possible upon customer’s request.

4. 3. BLOCK DIAGRAM Scaler NT68xxxUFG DC-DC Converter OSD Control +5V
Analog RGB
DVI
(option)
TFT LCD Module
Inverter
LCD Power
LVDS Signal
+12V

5. 4. DIMENSION 4.1 Main Board Dimension (110 X 100 X 1.6 mm)
※ Option ( DVI )

6. 4.2 OSD Board Dimension (109 X 21 X 1.6 mm)

7. 5. PIN INFORMATION 5. 1 Pin Connectors
5.1.1 LCD I/F (CN301) for LVDS Single output
Pin No.
Function 1 NC 6
CLK+ 11
GND 16
YP0- 2 7
CLK- 12
YP1+ 17 3
YP3+ 8 13
YP1- 18 4
YP3- 9
YP2+ 14 19
VCC 5 10
YP2- 15
YP0+ 20
5.1.2 LCD I/F (CN403) for LVDS Dual output
Pin No.
Function 1
VCC 9
RXE3- 17
GND 25
RXO2+ 2 10
RXEC+ 18
RXE0+ 26
RXO2- 3 11
RXEC- 19
RXE0- 27
RXO1+ 4 NC 12
RXE2+ 20
RXO3+ 28
RXO1- 5 DE 13
RXE2- 21
RXO3- 29
RXO0+ 6 14 22
RXOC+ 30 7 15
RXE1+ 23
RXOC- 8
RXE3+ 16
RXE1- 24
5.1.3 VGA Input (J103)
Pin No.
Function 1
RED 5
Check Signal 9 NC 13
HSYNC 2
GREEN 6
GND 10 14
VSYNC 3
BLUE 7 11 15
DDC_SCL 4 8 12
DDC_SDA
5.1.4 LCD I/F (JP1) for TTL output
Pin No.
Function 1
ROT 11 B5 21 G5 31 R5 2
CLK 12 B4 22 G4 32 R4 3
MIRR 13
GND 23 33 4 DE 14 B3 24 G3 34 R3 5 15 B2 25 G2 35 R2 6
Vsync 16 B1 26 G1 36 R1 7 17 B0 27 G0 37 R0 8
Hsync 18 28 38
Vcc 9 B7 19 G7 29 R7 39 10 B6 20 G6 30 R6 40

8. 5.1.12 Touch I/F (CN104) : JP101 Select 5V or 12V
5.1.5 VGA Input (CN106)
Pin No.
Function 1
HSYNC 5
BLUE 9
RED 13
GND 2 6 10 3
VSYNC 7
GREEN 11
DDC_SCL 4 NC 8 12
DDC_SDA
5.1.6 DVI Input (CN102)
Pin No.
Function 1
DATA2- 7
DDC SDA 13
DATA3+ 19
GND 2
DATA2+ 8 NC 14
+5V 20
DATA5- 3 9
DATA1- 15 21
DATA5+ 4
DATA4- 10
DATA1+ 16
HPD 22 5
DATA4+ 11 17
DATA0- 23
CLOCK- 6
DDC SCL 12
DATA3- 18
DATA0+ 24
CLOCK+
5.1.7 DVI Input (CN304)
Pin No.
Function 1
DATA R+ 6
GND 11
CLOCK- 16 2
DATA R- 7
DATA B+ 12 17
+5V 3 8
DATA B- 13
DDC SCL 18
HPD 4
DATA G+ 9 14
SYNC DET 19 5
DATA G- 10
CLOCK+ 15
DDC SDA 20
5.1.8 DC IN (J101)
Pin No.
Function 1
GND 2
12V 3
5.1.9 DC IN (CN101)
Pin No.
Function 1
12V 2 5V 3
GND
OSD I/F (CN10)
Pin No.
Function 1
Menu 4 Up 7
LED_RED 10
( Volume ) 2
Select 5
GND 8
Power 11
( IR ) 3
Down 6
LED_GRN 9
( Source ) 12
( +5V )
Inverter I/F (J106)
Pin No.
Function 1
12V 3
GND 5
Backlight On/Off 2 4 6
Dim ADJ.
Touch I/F (CN104) : JP101 Select 5V or 12V
Pin No.
Function 1
Vcc 2
GND 3

9. 6. REFERENCE DATA 6.1 Limited Values 6.2 Features Symbol Description
Min
Max
Unit
VDD
+12V DC Power supply
11.4
12.6 V
IDD
Input current
+3.0 A
Vi(RGB)
Video input signal
-0.3
+1.0
6.2 Features
Parameter
Value
Unit
Overall dimensions
Width
110 mm
Height
100
Max. output resolution
1920 dots x 1080 lines
Data processing
8 x 3[R,G,B]
Bits
Input impedance 75
Ohm
Video -
Sync
Sync polarities
+/-
Sync levels
5.0 V
Supply voltage
12.0
Max. number of colors
16.2M
Colors
Operating temperature
0~65 °C
Storage temperature
-20 ~70
Max.weight
T.B.D

10. 7. Setup for Operation
The OSD (On Screen Display) provides certain functions to have clear image and others.
The control functions defined on OSD operation are as below.
7.1 Functions on OSD Menu
OSD Menu
Description
Display
Brightnes
Contrast
Clock
Phase
H Position
V Position
Sharpness
Adjust the brightness of the screen
Adjust the contrast of the screen
Adjust the horizontal size of the screen's image
Adjust the focus of the screen's image
Adjust the horizontal position of the screen's image
Adjust the vertical position of the screen's image
Adjust the sharpness of the screen's image
Audio
Volume
Mute
Adjust volume
Adjust mute on/off
Color
9300
7500
6500
User Red
Green
Blue
9300, 7500 and 6500 Temperature and user Temperature, Red, Green & Blue
Language
Select one of the nine language
OSD
OSD Time Out
OSD Position
Transparen
Auto Setting
Recall
Adjust the display time of osd
Adjust the position of osd
Adjust the transparency of osd
Automatically adjust the Horizontal position, Vertical position,
Horizontal size, and Phase
Window's background or characters should be displayed on your
Full screen prior to proceed this function.
Initialize to default value
Source
Analog
DVI
Select input source one of Analog and DVI.
Misc
Light Enable
Light Contrast
Light Bright
Light H Start
Light H Width
Light V Start
Light V Width
This function is used when highlight special area.
Enable or disable the Light window.
Adjust the contrast of the Light window.
Adjust the bright of the Light window.
Adjust the horizontal position of the Light window.
Adjust the horizontal size of the Light window.
Adjust the vertical position of the Light window.
Adjust the vertical size of the Light window.

11. 8. Firmware Version Change
The table below shows the model names of LCD panel, LCD power,
No.
Firmware Version
Note 01
V1.00
Reference Firmware
9. Panel Tuning
The table below shows the Data, LCD Name, LCD power, Inverter, Resolution,
No.
Date
Panel Name
Power
Inverter
Resolution
Note 01
LM150X08
3.3V
FIF B
1024x768 02
LM190E08 5V
0150LG-75-2P
1280x1024 03
LM201U04
12V
1309WB-12V
1600x1200 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27