ITEC 275 Computer Networks – Switching, Routing, and WANs

ITEC 275 Computer Networks – Switching, Routing, and WANs
Week Seven 2017 Robert D’Andrea

Learning Activities Domain Name Server (DNS) Summarization
Agenda Learning Activities Domain Name Server (DNS) Summarization Root Owner DNS Routing tables Spanning Tree Protocol Rapid Spanning Tree Protocol Static versus Dynamic Routing Routing Protocols and Characteristics

DNS Domain Names

Interpreting a DNS domain names
DNS has a method of noting and interpreting the fully qualified path to a DNS domain name similar to the way full paths to files or directories are noted or displayed at a command prompt. For example, a directory tree path helps point to the exact location of a file stored on your computer. For Windows computers, the back slash (\) indicates each new directory that leads to the exact location of a file. For DNS, the equivalent is a period (.) indicating each new domain level used in a name.

Interpreting File Names
UNIX uses the concept of relative and absolute file names. If a file name is preceded by a forward slash (e.g. /bin), the name is absolute. If the name is without a leading slash, it is considered relative to your current working directory. Example1: Present location is /abc/xyz, I am want to remove /abc/xyz/read/hello.txt file. Using relative path: rm read/hello.txt

For DNS, an example of a domain name with multiple levels is the following, a fully qualified domain name (FQDN): host-a.example.microsoft.com. Unlike the file name example, a DNS FQDN, when read from left to right (/proc/bus/usb), moves from its most specific information (the DNS name for a computer called "host-a") to its highest or most general piece of information (the trailing period (.) that indicates the root of the DNS name tree). This example shows the four separate DNS domain levels that lead away from the specific host location of "host-a":

1. The "example" domain, which corresponds to a subdomain where the computer name "host-a" is registered for use. 2. The "microsoft" domain, which corresponds to the parent domain that roots the "example" subdomain. 3. The "com" domain, which corresponds to the top-level domain designated for use by business or commercial organizations that roots the "microsoft" domain. 4. The trailing period (.), which is a standard separator character used to qualify the full DNS domain name to the root level of the DNS namespace tree.

Root Servers When a computer on the Internet needs to resolve a domain name, it uses resolver software to do the lookup. A resolver breaks the name up into its labels from right to left. The first component is queried using a root server to obtain the responsible authoritative server. Queries for each name are performed until a name server returns the answer of the original query.

As of 2013, there are 13 root name servers, with names in the form letter.root-server.net. This does not mean that there are only 13 physical servers; each site uses redundant computer equipment to provide reliable service when hardware and software fail.

Route Summarization

Classful Boundary Summarization

Routing Tables

Bridge Protocol Data Unit (BPDU)
What are BPDUs? BPDUs are data messages that are exchanged across the switches within an extended LAN that uses a spanning tree protocol topology. BPDU packets contain information on ports, addresses, priorities and costs and ensure that the data ends up where it was intended to go. BPDU messages are exchanged across bridges to detect loops in a network topology. The loops are then removed by shutting down selected bridge interfaces and placing redundant switch ports in a backup, or blocked, state.

Bridge Protocol Data Unit (BPDU)

Stateless Auto-configuration

Stateless Auto Configuration is an important feature offered by the IPv6 protocol. It allows the various devices attached to an IPv6 network to connect to the Internet using the Stateless Auto Configuration without requiring any intermediate IP support in the form of a Dynamic Host Configuration Protocol (DHCP) server. A DHCP server holds a pool of IP addresses that are dynamically assigned for a specified amount of time to the requesting node in a Local Area Network (LAN).

Stateless Auto Configuration is a boom for the Network Administrators since it has automated the IP address configuration of individual network devices. Earlier, configuration of the IP addresses was a manual process requiring support of a DHCP server. However, IPv6 allows the network devices to automatically acquire IP addresses and also has provision for renumbering/reallocation of the IP addresses en masse. With a rapid increase in the number of network devices connected to the Internet, this feature was long overdue. It simplifies the process of IP address allocation by doing away with the need of DHCP servers and also allows a more streamlined assignment of network addresses there by facilitating unique identification of network devices over the Internet.

Switching and Routing Choices
Layer 2 transparent bridging (switching) Multilayer switching Spanning Tree Protocol enhancements VLAN technologies Routing Static or dynamic Distance-vector and link-state protocols Interior and exterior

Selection Criteria for Switching and Routing Protocols
Network traffic characteristics Bandwidth, memory, and CPU usage The number of peers supported The capability to adapt to changes quickly Support for authentication

Goals must be established Many options should be explored
Making Decisions Goals must be established Many options should be explored The consequences of the decision should be investigated Contingency plans should be made A decision table can be used. Decision tables are composed of rows and columns. Each row corresponds to a single rule, with the columns defining the conditions and actions of the rules.

Example Decision Table

Transparent Bridging (Switching) Tasks
What is Transparent Bridging? A transparent bridge is a common type of bridge that observes incoming network traffic to identify media access control (MAC) addresses. These bridges operate in a way that is transparent to all the network's connected hosts. A transparent bridge records MAC addresses in a table that is much like a routing table and evaluates that information whenever a packet is routed toward its location. A transparent bridge may also combine several different bridges to better inspect incoming traffic. Transparent bridges are used primarily in Ethernet networks.

Example of how transparent bridging works Transparent bridges save and maintain the source- route addresses of incoming frames by listening to all the connected bridges and hosts. They use a transparent bridging algorithm to a accomplish this. The algorithm has five components: Learning Flooding Filtering Forwarding Avoiding loops

Example of how transparent bridging works Consider three hosts, A, B and C, and a bridge with three ports. Host A is connected to Bridge Port 1, Host B is connected to Bridge Port 2 and Host C is connected to Bridge Port 3. Host A sends a frame to the bridge that is addressed to Host B. The bridge checks the frame's source address and creates an address and port number entry for Host A in its forwarding table. The bridge then examines the frame's destination address, but does not find it in its forwarding table. As a result, the bridge sends the frame to all the other ports (2 and 3). This is called flooding. The frame is then received by Host B and Host C, which also check the destination address. Host B recognizes a destination address match and sends a response to Host A.

Example of how transparent bridging works On the return path, the bridge adds an address and port number entry for Host B to its forwarding table. The bridge already has Host A's address in its forwarding table so it forwards the response only to Port 1. In this way, none of the Port 3 hosts are burdened with response requirements. Through this process, two-way communication between Host A and Host B is facilitated without the need for further flooding.

Ethernet switches and bridges use transparent bridging. A transparent bridge connects one or more LAN segments so that end systems on different segments can communicate with each other transparently. An end system sends a frame to a destination without knowing whether the destination is local or on the other side of the bridge.

Forward frames transparently Learn which port to use for each MAC address Flood frames when the destination unicast address hasn’t been learned yet Filter frames from going out ports that don’t include the destination address Flood broadcasts and multicasts

STP Definitions STP is a bridge protocol that uses the STA (Spanning Tree Algorithm) to find redundant links dynamically and create a spanning-tree topology database. Bridges exchange BPDU (Bridge Protocol Data Unit) messages with other bridges to detect loops. BPDU STP hello packet that is sent out at configurable intervals to exchange information among bridges in the network.

Connectivity to different segments
Transparent Bridging Connectivity to different segments

Switching Table on a Bridge or Switch
MAC Address Port B9 1 2 C-60-7C-01 3 C-02

Cisco Spanning Tree Protocol Enhancements
PortFast is a Cisco product feature. It supports the concept of a switch edge port. UplinkFast and Backbone Fast. UpLinkFast is a Cisco product feature that is configured on access layer switches. Improves the convergence time of STP. Unidirectional link detection is a hardware failure detection between switches. Loop Guard is a Cisco product feature. Supports the prevention of loops caused by blocking port erroneously moving to the forwarding state.

X X If a link fails, how long will STP take to recover?
Redundant Uplinks Core Layer X Distribution Layer Switch B Switch C Primary Uplink X Secondary Uplink Access Layer X = blocked by STP Switch A If a link fails, how long will STP take to recover? Use UplinkFast to speed convergence

Protocols for Transporting VLAN Information
Inter-Switch Link (ISL) Tagging protocol Cisco proprietary IEEE 802.1Q IEEE standard VLAN Trunk Protocol (VTP) VLAN management protocol is a switch-to-switch and switch-to-router configuration.

Protocols for Transporting VLAN Information
VLAN Trunk Protocol (VTP) The VLAN management protocol exchanges VLAN configuration changes as they are made to the network. VTP manages additions, deletions, and renaming of VLANs on a campus network without requiring manual intervention at each switch.

Selecting Routing Protocols
They all have the same general goal: To share network reachability information among routers They differ in many ways: Interior versus exterior Metrics supported hop count or bandwidth. Dynamic versus static and default Distance-vector versus link-sate Classful versus classless Scalability

Interior Versus Exterior Routing Protocols
Interior routing protocols are used within an autonomous system Exterior routing protocols are used between autonomous systems Autonomous system definitions: “A set of routers that presents a common routing policy to the internetwork”“ A network or set of networks that are under the administrative control of a single entity”

Routing Protocol Metrics
A metric is the determining factor used by a routing algorithm to decide which route to a network is better than another Examples of metrics: Bandwidth - capacity Delay - time Load - amount of network traffic Reliability - error rate Hop count - number of routers that a packet must travel through before reaching the destination network Cost - arbitrary value defined by the protocol or administrator

Cisco’s On-Demand Routing
Routing Algorithms Static routing Calculated before hand, offline Default routing “If I don’t recognize the destination, just send the packet to Router X” Cisco’s On-Demand Routing Routing for stub networks Uses Cisco Discovery Protocol (CDP) Dynamic routing protocol Distance-vector algorithms Link-state algorithms

Routing Algorithms Stub network has only one default path to non-local hosts and no outside network knowledge. Non-local stub network traffic uses a single logical path when traveling in and out of the network. A good example would be an individual or group that uses only one router to link to an internet service provider (ISP). The individual or group are considered stub networks by the ISP.

Routing Algorithms

To configure the default route to be 192.168.1.1:
Routing Algorithms The default route is the IP address of the next hop when no other routes are known. To configure the default route to be : config ter ip route An interface can be used as an alternative to and IP address. To use serial0/0 for destinations not in the routing table, use: ip route serial 0/0

Routing Algorithms A default route of a computer that is participating in computer networking is the packet forwarding rule (route) taking effect when no other route can be determined for a given Internet Protocol (IP) destination address. All packets for destinations not established in the routing table are sent via the default route. This route generally points to another router, which treats the packet the same way. If a route matches, the packet is forwarded accordingly, otherwise the packet is forwarded to the default route of that router. The process repeats until a packet is delivered to the destination. Each router traversal counts as one hop in the distance calculation for the transmission path.

Routing Algorithms

Cisco’s On- Demand Routing
Routing Algorithms Cisco’s On- Demand Routing The Cisco Discovery Protocol (CDP) is a Cisco proprietary protocol that, among other things, is used to discover other Cisco devices on either broadcast or non- broadcast media. CDP provides administrators with information that includes the IP address, software version, as well as the capabilities of the neighbor device. On-Demand Routing (ODR) is an enhancement to Cisco Discovery Protocol that advertises the connected IP prefix or prefixes of a stub router via CDP. ODR also supports VLSM (Variable Length Subnet Mask), which means that it can be used in just about any network.

Routing Algorithms Cisco’s On- Demand Routing ODR is a feature that provides IP routing for stub sites with minimum overhead. The overhead of a general, dynamic routing protocol is avoided without incurring the configuration and management overhead of static routing. A stub router can be thought of as a spoke router in a hub-and-spoke network topology where the only router to which the spoke is adjacent is the hub router. In such a network topology, the IP routing information required to represent this topology is fairly simple. These stub routers commonly have a WAN connection to the hub router, and a small number of LAN network segments (stub networks) are directly connected to the stub router.

Cisco’s On- Demand Routing (ODR)
Routing Algorithms Cisco’s On- Demand Routing (ODR) It is important to know that ODR is not a routing protocol. Instead, it is simply an enhancement/feature to CDP that is used to dynamically propagate routing information at Layer 2. The primary reasons ODR is often incorrectly referred to as a routing protocol is because it allows routers to dynamically exchange routing information. The second reason is because ODR is enabled using the router odr global configuration command.

Routing Algorithms ODR (On Demand Routing) allows routing information from hub/spoke topology to be exchanged with hub and entered into hub routing table without running any standard routing protocol. ODR is designed to be used in a partially meshed environment (e.g. Frame Relay networks) where a hub router maintains one link each to multiple stub routers (spokes routers). Therefore, for any spoke to communicate with another spoke, such traffic must pass through the hub. If each stub network is simply made up of the stub router and multiple hosts (much like remote location of a corporate organization). There is no need to run any routing protocols on the stub since all host are connected and the routes can be exchanged with hub router using ODR. Hub routing will install the routes in routing/forwarding tables as connected routes with next-hop address of each stub respectively.

Routing Algorithms ODR uses CDP protocol that runs by default on all Cisco devices. CDP is used by Cisco devices to learn and retrieve basic information about their connected neighbors. Therefore, disabling CDP on a router will also disable propagation of ODR traffic. The primary benefit of using ODR is that it is not CPU intensive and it consumes very little bandwidth.

Routing Algorithms

Routing Algorithms Cisco’s On- Demand Routing

Static Routing Example
Router A Router B Router C s0 s0 s0 s1 e0 e0 e0 Host A Host B Host C RouterA(config)#ip route Send packets for subnet 50 to (Router B)

Default Routing Example
Interior Routing Protocols RIPv1 – classful RIPv2 – classless OSPF – Build an entire topology ISIS – IGRP – older CISCO protocol EIGRP – Enhanced Interior CISCO protocol Exterior Routing Protocol BGP

Routing Protocols Provide Discovery of new networks Automatic route updating Best path determination Failover – load balancing Eliminates human error

Distance Vector Routing Protocols Neighboring routers communicate with each other to keep their routing tables updated. A view of the entire network is through all routers connected together. Link State Routing Protocols Share link information (up or down) build a routing table based on the topology that has been built.

Default Routing

Router A Router B Router C s0 s0 s0 s1 e0 e0 e0 Host A Host B Host C RouterA(config)#ip route If it’s not local, send it to (Router B)

Distance-Vector Routing
Router maintains a routing table that lists known networks, direction (vector) to each network, and the distance to each network Router periodically (every 30 seconds, for example) transmits the routing table via a broadcast packet that reaches all other routers on the local segments Routers update their routing table, if necessary, based on received broadcasts

Distance-Vector Routing Tables
Router A Router B Router A’s Routing Table Router B’s Routing Table Network Distance Send To Port 1 Router B Network Distance Send To Port Router A

Routers send updates only when there’s a change
Link-State Routing Routers send updates only when there’s a change Router that detects change creates a link-state advertisement (LSA) and sends it to neighbors Neighbors propagate the change to their neighbors Routers update their topological database if necessary

Distance-Vector Vs. Link-State
Distance-vector algorithms keep a list of networks, with next hop and distance (metric) information Link-state algorithms keep a database of routers and links between them Link-state algorithms think of the internetwork as a graph instead of a list When changes occur, link-state algorithms apply Dijkstra’s shortest-path algorithm to find the shortest path between any two nodes

Link-State Routing Protocol

Choosing Between Distance-Vector and Link-State
Choose Distance-Vector Simple, flat topology Hub-and-spoke topology Junior network administrators Convergence time not a big concern Choose Link-State Hierarchical topology More senior network administrators Fast convergence is critical

Choosing between Distance Vector and Link State Protocols
Routing Information Protocol (RIP) Version 1 and 2 Interior Gateway Routing Protocol (IGRP) Enhanced IGRP Border Gateway Protocol (BGP) Link-State Open Shortest Path First (OSPF) Intermediate System-to- Intermediate System (IS-IS)

Routing protocol: A protocol used by a router.
Routing Protocols Routers talk to routers on the network, sharing information with each other. Routed protocol: IP Routing protocol: A protocol used by a router. Distance Vector routing protocols include RIP, RIPv1, RIPv2, IGRP, and EIGRP Routers communicate with neighboring routers. Distance = Metric

Link State routing protocols include OSPF and ISIS
Routers communicate with all other routers. They exchange link state information to build a topology of the entire network. What direction of interface are you going out of? Link State refers to the interface connections or “links” to other routers and networks.

Routing Protocols What is convergence? Convergence is when all routers in the network have the same picture of the network.

Routing Information Protocol (RIP)
First standard routing protocol developed for TCP/IP environments RIP Version 1 is documented in RFC 1058 (1988) RIP Version 2 is documented in RFC 2453 (1998) Easy to configure and troubleshoot Broadcasts its routing table every 30 seconds; 25 routes per packet Uses a single routing metric (hop count) to measure the distance to a destination network; max hop count is 15

Includes the subnet mask with route updates
RIP V2 Features Includes the subnet mask with route updates Supports prefix routing (classless routing, super netting) Supports variable-length subnet masking (VLSM) Includes simple authentication to foil crackers from sending routing updates.

IGRP Solved Problems with RIP
15-hop limitation in RIP IGRP supports 255 hops Reliance on just one metric (hop count) IGRP uses bandwidth, delay, reliability, load (By default just uses bandwidth and delay) RIP's 30-second update timer IGRP uses 90 seconds

Adjusts to changes in internetwork very quickly
EIGRP Adjusts to changes in internetwork very quickly Incremental updates contain only changes, not full routing table Updates are delivered reliably Router keeps track of neighbors’ routing tables and uses them as feasible successor Same metric as IGRP, but more granularity (32 bits instead of 24 bits)

Open Shortest Path First (OSPF)
Open standard, defined in RFC 2328 Adjusts to changes quickly Supports very large internetworks Does not use a lot of bandwidth Authenticates protocol exchanges to meet security goals Is an IP routing protocol that is completely link state.

OSPF Metric A single dimensionless value called cost. A network administrator assigns an OSPF cost to each router interface on the path to a network. The lower the cost, the more likely the interface is to be used to forward data traffic. On a Cisco router, the cost of an interface defaults to 100,000,000 divided by the bandwidth for the interface. For example, a 100- Mbps Ethernet interface has a cost of 1.

OSPF Areas Connected via Area Border Routers (ABRs)
Area 0 (Backbone) ABR ABR ABR Area 1 Area 2 Area 3

Intermediate System-to-Intermediate System.
IS-IS Intermediate System-to-Intermediate System. Link-state routing protocol. Designed by the ISO for the OSI protocols. Integrated IS-IS handles IP also.

IS-IS The IS-IS routing protocol is a link state protocol for interior routing. It is an ISO standard and is completely defined in [ISO/IEC-10589]. The ES-IS neighbor greeting protocol is used in conjunction with IS-IS. For its hierarchical routing, IS-IS divides the network into non-overlapping IS-IS areas and its routers are categorized as Level 1 or Level 2 routers, or both. Level 1 routers are responsible for routing packets between LANs within an IS-IS area, and Level 2 routers forward packets between IS-IS areas.

IS-IS IS-IS is a routing protocol designed to move information efficiently within a computer network, a group of physically connected computers or similar devices. It accomplishes this by determining the best route for datagrams through a packet-switched network. The protocol was defined as an international standard within the Open Systems Interconnections (OSI) reference design

Border Gateway Protocol (BGP)
Allows routers in different autonomous systems to exchange routing information Exterior routing protocol Used on the Internet among large ISPs and major companies Supports route aggregation Main metric is the length of the list of autonomous system numbers, but BGP also supports routing based on policies

Border Gateway Protocol (BGP)

Internet Protocol (EGP)
During the early days of the Internet, an EGPversion 3 (EGP3) was used to interconnect Autonomous Systems. Currently, BGP version 4 is the accepted standard for Internet routing and has essentially replaced the more limited EGP3.

Internet Control Message Protocol (ICMP)
ICMP works at the Network layer and is used by IP for many different services. ICMP is a management protocol and messaging service for IP. Its messages are carried as IP datagrams.

Routing Protocols Summary
Distant vector: RIP and IGRP Link-state: OSPF Hybrid: EIGRP

Transparent bridging is used on modern switches
Summary The selection of switching and routing protocols should be based on an analysis of Goals Scalability and performance characteristics of the protocols Transparent bridging is used on modern switches But other choices involve enhancements to STP and protocols for transporting VLAN information There are many types of routing protocols and many choices within each type

What are some options for enhancing the Spanning Tree Protocol?
Review Questions What are some options for enhancing the Spanning Tree Protocol? What factors will help you decide whether distance-vector or link-state routing is best for your design customer? What factors will help you select a specific routing protocol? Why do static and default routing still play a role in many modern network designs?

Spanning Tree Protocol Rapid Spanning Tree Protocol
This Week’s Outcomes Spanning Tree Protocol Rapid Spanning Tree Protocol Static versus Dynamic Routing Routing Protocols and Characteristics

Due this week 6-1 – Concept questions 5

Questions, comments, concerns?
Q & A Questions, comments, concerns?

ITEC 275 Computer Networks – Switching, Routing, and WANs

Similar presentations

Presentation on theme: "ITEC 275 Computer Networks – Switching, Routing, and WANs"— Presentation transcript:

Similar presentations

About project

Feedback

Log in

Auth with social network:

ITEC 275 Computer Networks – Switching, Routing, and WANs

Similar presentations

Presentation on theme: "ITEC 275 Computer Networks – Switching, Routing, and WANs"— Presentation transcript:

Similar presentations

About project

Feedback