Presentation is loading. Please wait.

Presentation is loading. Please wait.

Study of vacuum stability at cryogenic temperature

Published bySheena Wilkins Modified over 5 years ago

Similar presentations

Presentation on theme: "Study of vacuum stability at cryogenic temperature"— Presentation transcript:

1 Study of vacuum stability at cryogenic temperature
WP4 - Activity at LNF Berlin 30/05/2017 Marco Angelucci Roberto Cimino

2 Beam Screen Temperature
Working Pressure (<10-11) BS Temperature Range LHC SR Power = 0.13 W/m FCC SR Power = 40 W/m Berlin 30/05/17 Marco Angelucci

3 Study the behaviour of different surfaces (treated sample)
Temperature Find right working temperature is a fundamental point for vacuum stability. Work near a gas desorption temperature could generate great pressure oscillations. Study of adsorption/desorption behaviour near critical temperature is mandatory to understand vacuum stability Study the behaviour of different surfaces (treated sample) Berlin 30/05/17 Marco Angelucci

4 Vacuum Stability Interaction With Electrons Desorption
Interaction With Photons Interaction With Electrons Photoelectron Emission Secondary Electron Emission Heat Load Electron Cloud Interaction With Ions Desorption Berlin 30/05/17 Marco Angelucci

5 Scanning Tunneling Microscopy
LNF-Lab Now Two Different Ultra-High Vacuum Systems equipped with: X-Ray/UV Photoemission High Temperature Manipulator Low Energy Electron Diffraction Secondary Electron Yield Spectroscopy Surface Preparation Gas-Line Low Temperature Manipulator (≈ 9 K) New Mass Spectrometer Raman Spectroscopy Scanning Tunneling Microscopy Berlin 30/05/17 Marco Angelucci

6 LNF-Lab Activities I Adsorption process of Argon (Ar) and Carbon- Monoxide (CO) on atomically sputtered Cu surface at low temperature (with SEY) Desorption process of Ar and CO from heated Cu sample (with SEY and TPD) Interaction between electrons and Ar films (SEY) Berlin 30/05/17 Marco Angelucci

7 LNF-Lab Activities I Adsorption process of Argon (Ar) and Carbon- Monoxide (CO) on atomically sputtered Cu surface at low temperature (with SEY) Desorption process of Ar and CO from heated Cu sample (with SEY and TPD) Interaction between electrons and Ar films (SEY) Berlin 30/05/17 Marco Angelucci

8 Argon Adsorption (SEY)
Adsorption process of Argon on Cu sample at 10 K General behaviour Two different regions with characteristic trends Low Energy (<50 eV) Thick Film (TF) High Energy (>50 eV) Single Layer (SL) Berlin 30/05/17 Marco Angelucci

9 Argon Adsorption (SEY)
Two different regions with characteristic trends Low Energy (<50 eV) Thick Film (TF) High Energy (>50 eV) Single Layer (SL) Berlin 30/05/17 Marco Angelucci

10 Argon Results I Adsorption Process (LT)
Formation of a Thick Film (TF) at high coverage (increasing of SEY) Formation of a Single Layer (SL) on Cu at LT (characteristic peaks) Berlin 30/05/17 Marco Angelucci

11 LNF-Lab Activities II Study the adsorption process on “As received” and treated samples Berlin 30/05/17 Marco Angelucci

12 LNF-Lab Activities I Adsorption process of Argon (Ar) and Carbon- Monoxide (CO) on atomically sputtered Cu surface at low temperature (with SEY) Desorption process of Ar and CO from heated Cu sample (with SEY and TPD) Interaction between electrons and Ar films (SEY) Berlin 30/05/17 Marco Angelucci

13 Argon Desorption (SEY)
Adsorption Desorption TF SL Berlin 30/05/17 Marco Angelucci

14 Argon Desorption (SEY)
Temperatures 17 K 24 K Berlin 30/05/17 Marco Angelucci

15 Argon Desorption (SEY)
Desorption process: Cu sample heated up to 100 K Sample “Cleaned” SEY returns to the initial value Slight differences due to possible residual impurities on the surface Berlin 30/05/17 Marco Angelucci

16 Argon Desorption (TPD)
Test of Temperature Programmed Desorption (TPD) with Mass Spectrometer P1 P2 P3 Ar Different desorption process of TF from Manipulator (Peak 1) and TF/SL from sample (Peak 2 and 3) TF-Manip. @ 22 K TF-Sample @ 30 K 37 K Berlin 30/05/17 Marco Angelucci

17 Argon Results Adsorption Process (LT) Desorption Process (Heating)
Formation of a Thick Film (TF) at high coverage (increasing of SEY) Formation of a Single Layer (SL) on Cu at LT (characteristic peaks) Desorption Process (Heating) System returns to the original state with slight differences Possibility to follow formation of SL from TF Possibility to measure desorption temperature with SEY and TPD Berlin 30/05/17 Marco Angelucci

18 Different Temperatures measured with TPD and SEY
Argon Results Desorption Process Different Temperatures measured with TPD and SEY More studies of desorption induced by electrons Berlin 30/05/17 Marco Angelucci

19 LNF-Lab Activities II Study the adsorption process on Ar and CO on “As received” and treated samples Test for TPD measurements with new mass spectrometer Measure desorption with SEY and TPD at the same time Berlin 30/05/17 Marco Angelucci

20 LNF-Lab Activities I Adsorption process of Argon (Ar) and Carbon- Monoxide (CO) on atomically sputtered Cu surface at low temperature (with SEY) Desorption process of Ar and CO from heated Cu sample (with SEY and TPD) Interaction between electrons and Ar films (SEY) Berlin 30/05/17 Marco Angelucci

21 Argon Adsorption II (SEY)
We can summarize the results observed for Ar adsorption on Cu sample at 10 K 10 Berlin 30/05/17 Marco Angelucci

22 e--Argon Interaction (SEY)
Subsequent SEY scans on the Ar-dosed Cu sample 10 Berlin 30/05/17 Marco Angelucci

23 e--Argon (SEY) Continuous SEY scans
GAS ON: Adsorption GAS OFF: e- Desorption e- bombardment induced different behaviour SEY at 930 decreases as a function of time SEY at 10 eV remains constant Berlin 30/05/17 Marco Angelucci

24 e--Argon (SEY) SEY measured in different points
New Point presents different SEY spectra with the same features of SEY with large amount of Ar Berlin 30/05/17 Marco Angelucci

25 Argon Results II (SEY) Beam-Layer Interaction
Argon Thick film interacts with primary electrons and desorbs Berlin 30/05/17 Marco Angelucci

26 Beam Interaction Thermal Desorption Non-Thermal Desorption
Electron beam dependence (size, energy …) Berlin 30/05/17 Marco Angelucci

27 Adsorption process of Carbon Monoxide on Cu sample at 10K
CO Adsorption (SEY) Adsorption process of Carbon Monoxide on Cu sample at 10K General behaviour Two different regions High Energy (>50 eV) Low Energy (<50 eV) eV decreases during deposition from 1.4 to 1.1 Formation of CO Thick Film (TF) Characteristic peak of TF at 65 eV Berlin 30/05/17 Marco Angelucci

28 Adsorption process of Argon on Cu sample at 10K
CO Adsorption (SEY) Adsorption process of Argon on Cu sample at 10K Low Energy behaviour Two different regions High Energy (>50 eV) Low Energy (<50 eV) Characteristic peaks at different low energies Formation of Argon Single Layer (SL) Berlin 30/05/17 Marco Angelucci

29 CO Results (SEY) Adsorption Process (10 K)
Formation of a TF with Low SEY Characteristic peaks for SL in the Low Energy Region Berlin 30/05/17 Marco Angelucci

30 Low-Energy SEY Different LE-SEY structures
CO Ar 10 Different LE-SEY structures depending from adsorbed gases Berlin 30/05/17 Marco Angelucci

31 Emitted electrons depends to e- primary energy
Low Energy SEY Secondary e- Reflected e- Cimino et al., PRL 93 (2004) Emitted electrons depends to e- primary energy Berlin 30/05/17 Marco Angelucci

32 Low Energy SEY Different contributions to SEY
Important contribution of reflected e- between 0 and 50 eV Cimino et al., PRL 93 (2004) Berlin 30/05/17 Marco Angelucci

33 Low-Energy SEY Different LE-SEY structures
CO Ar 10 Different LE-SEY structures depending from adsorbed gases Study of reflected e- contribution Berlin 30/05/17 Marco Angelucci

34 Important Results Follow Adsorption process checking the High- Energy SEY (HE-SEY) Distinguish Single Layer (SL) from Thick Film (TF) formation by Low-Energy SEY (LE-SEY) Quantify the number of adsorbed layers on surface Measure the desorption temperature of TF and SL with SEY and TPD Measure Work Function (WF) variation Berlin 30/05/17 Marco Angelucci

35 Important Task Distinguish electron-induced from thermal desorption
Study the contribution of reflected e- to Low- Energy SEY Study the influence of the adsorbed gas in the Low- Energy SEY Berlin 30/05/17 Marco Angelucci

36 Activities/Upgrades Different Gases adsorption (CO, CO2, CH4 ...) (pure and mixture) Electron desorption Thermal Programmed Desorption (TPD) Low-Energy SEY Measurements on treated samples (received) New gas line Additional electron gun (Tests) New High-resolution Mass Spectrometer (Mounted) Maintenance of Electron Analayzer (Hardware and Software Tests) Berlin 30/05/17 Marco Angelucci

37 ... Which will reconvene in
e—cloud conference ... Which will reconvene in Elba in June 2018 Berlin 30/05/17 Marco Angelucci

Download ppt "Study of vacuum stability at cryogenic temperature"

Similar presentations

Secondary Ion Mass Spectrometry

Secondary Ion Mass Spectrometry
AMCF Materials Characterization School 2012 X-Ray Photoelectron Spectroscopy Tim Morgan.

AMCF Materials Characterization School 2012 X-Ray Photoelectron Spectroscopy Tim Morgan.
Electron Spectroscopies of InN grown by HPCVD Department of Physics and Astronomy Georgia State University Atlanta, Georgia Rudra P. Bhatta Solid State.

Electron Spectroscopies of InN grown by HPCVD Department of Physics and Astronomy Georgia State University Atlanta, Georgia Rudra P. Bhatta Solid State.
L.B. Begrambekov Plasma Physics Department, Moscow Engineering and Physics Institute, 115409 Moscow, Russia Peculiarities, Sources and Driving Forces of.

L.B. Begrambekov Plasma Physics Department, Moscow Engineering and Physics Institute, Moscow, Russia Peculiarities, Sources and Driving Forces of.
Dynamic hydrogen isotope behavior and its helium irradiation effect in SiC Yasuhisa Oya and Satoru Tanaka The University of Tokyo.

Dynamic hydrogen isotope behavior and its helium irradiation effect in SiC Yasuhisa Oya and Satoru Tanaka The University of Tokyo.
AUGER ELECTRON SPECROSCOPY. Auger Electron Spectroscopy (AES) was developed in the late 1960's deriving its name from the effect first observed by Pierre.

AUGER ELECTRON SPECROSCOPY. Auger Electron Spectroscopy (AES) was developed in the late 1960's deriving its name from the effect first observed by Pierre.
Low SEY Engineered Surface for Electron Cloud Mitigation

Low SEY Engineered Surface for Electron Cloud Mitigation
XPS and SIMS MSN 506 Notes.

XPS and SIMS MSN 506 Notes.
1 Results for period Jan 5 th – Nov 21 st ‘08 W.F. van Dorp, C.W. Hagen, T.E. Madey With grateful acknowledgements to Boris Yakshinskiy, Shimon Zalkind,

1 Results for period Jan 5 th – Nov 21 st ‘08 W.F. van Dorp, C.W. Hagen, T.E. Madey With grateful acknowledgements to Boris Yakshinskiy, Shimon Zalkind,
Epitaxial Overlayers vs Alloy Formation at Aluminum- Transition Metal Interfaces Richard J. Smith Physics Department Montana State University Bozeman MT.

Epitaxial Overlayers vs Alloy Formation at Aluminum- Transition Metal Interfaces Richard J. Smith Physics Department Montana State University Bozeman MT.
R. Cimino COULOMB’05, Senigallia, Sept 15, 05. 1 Surface related properties as an essential ingredient to e-cloud simulations. The problem of input parameters:

R. Cimino COULOMB’05, Senigallia, Sept 15, Surface related properties as an essential ingredient to e-cloud simulations. The problem of input parameters:
Alloy Formation at the Epitaxial Interface for Ag Films Deposited on Al(001) and Al(110) Surfaces at Room Temperature* N.R. Shivaparan, M.A. Teter, and.

Alloy Formation at the Epitaxial Interface for Ag Films Deposited on Al(001) and Al(110) Surfaces at Room Temperature* N.R. Shivaparan, M.A. Teter, and.
Single Molecule Dissociation by Tunneling Electrons.

Single Molecule Dissociation by Tunneling Electrons.
X-ray Photoelectron Spectroscopy —— Application in Phase-switching Device Study Xinyuan Wang A53073806.

X-ray Photoelectron Spectroscopy —— Application in Phase-switching Device Study Xinyuan Wang A
Deuterium retention mechanisms in beryllium M. Reinelt, Ch. Linsmeier Max-Planck-Institut für Plasmaphysik EURATOM Association, Garching b. München, Germany.

Deuterium retention mechanisms in beryllium M. Reinelt, Ch. Linsmeier Max-Planck-Institut für Plasmaphysik EURATOM Association, Garching b. München, Germany.
P=n 0 k B T or n 0 =p/k B T ideal gas atom density 2.69 × 10 25 m −3 at normal conditions ( 273.15 K and 101.325 kPa) k B the Boltzmann constant, T the.

P=n 0 k B T or n 0 =p/k B T ideal gas atom density 2.69 × m −3 at normal conditions ( K and kPa) k B the Boltzmann constant, T the.
Composition and thickness dependence of secondary electron yield for MCP detector materials Slade J. Jokela, Igor V. Veryovkin, Alexander V. Zinovev, Jeffrey.

Composition and thickness dependence of secondary electron yield for MCP detector materials Slade J. Jokela, Igor V. Veryovkin, Alexander V. Zinovev, Jeffrey.
1 Electron Cloud in LHC V. Baglin CERN AT-VAC, Geneva 1. Mecanism and Recipies 2. LHC Vacuum Chambers 3. Diagnostics 4. Conclusions Vincent Baglin Electron.

1 Electron Cloud in LHC V. Baglin CERN AT-VAC, Geneva 1. Mecanism and Recipies 2. LHC Vacuum Chambers 3. Diagnostics 4. Conclusions Vincent Baglin Electron.
Metal photocathodes for NCRF electron guns Sonal Mistry Loughborough University Supervisor: Michael Cropper (Loughborough University) Industrial Supervisor:

Metal photocathodes for NCRF electron guns Sonal Mistry Loughborough University Supervisor: Michael Cropper (Loughborough University) Industrial Supervisor:
Methods in Surface Physics Experimentation in Ultra-High Vacuum Environments Hasan Khan (University of Rochester), Dr. Meng-Fan Luo (National Central University)

Methods in Surface Physics Experimentation in Ultra-High Vacuum Environments Hasan Khan (University of Rochester), Dr. Meng-Fan Luo (National Central University)

Similar presentations

Ads by Google