1. ATLAS ITk CO₂ Cooling pipe routing Common Mechanics meeting
13/09/2018
ATLAS ITk CO₂ Cooling pipe routing
Common Mechanics meeting
26 October 2016
C. Bortolin, D.Giakoumi, B. Verlaat, L. Zwalinski

2. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
13/09/2018
Presentation Outline
Proposals for the locations for the PP2 manifold and the transfer lines routing into the Barrel region based on on-site investigation and discussion with ATLAS PO
Manifold Zones space availability-Sectors 5 & 13
Pipe routing from barrel area to PP2 manifold
Pipe routing from PP2 manifold outside the Barrel region
Feed-throughs on IDEP
Back-up slides: Alternative solutions
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

3. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
Outline of on site investigation
Visit to the ATLAS Cavern to identify possible manifold locations and piping passages
Discussion of the proposed locations/routings with the Atlas PO
Input from the PO on additional services and passages that cannot be used
Visit of ATLAS Cavern with the Project Office representatives
Retuning of the proposed locations after the last ATLAS visit and the PO recommendations
The predominant proposals after the last discussion with PO are presented
Details on the piping integration shall be defined by the PO (new engineer arriving to work on integration CATIA models)
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

4. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
13/09/2018
Manifold Zones – Space availability
Itk manifold location
IBL manifold location
A. Sector 5 Platform on IBL manifold level (Strips)
B. Sector 13 Platform between Muon BML-BIL (Pixel) A A B B
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

5. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
Manifold Zones – Space availability in Sector 5
Platforms next to IBL manifold
Sector 5 A
Platforms next to IBL manifold
C-side View B
Sector 13
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

6. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
Manifold Zones – Space availability in Sector 13
Platform between Muon BML-BIL
Space below metal bars
Concern: Not to block access below floor because new cables are foreseen a
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

7. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
Barrel → Sector 5 manifold:
A. Gaps between IDEP fingers
B. Gaps on Muon BIL on sectors 1, 3, 7 (150 mm)
Gap similar as sector 3
Gaps through inner muon layer
Sector 3
150 mm
Sector 7
Sector 1
C-side View
The large gaps between the muon chambers of S1, S3 & S7 give a very open path to the S5 platform proposed for the manifold. If use sectors 3&5 will have a symmetric system
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

8. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
Barrel → Sector 5 manifold:
A. Gaps between IDEP fingers
B. Gaps on Muon BIL on sectors 1, 3, 7 (150 mm)
Sector 3
Panoramic View
Sector 7
Sector 1
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

9. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
Sector 5 Manifold → external Detector Area
Gap between IBL junction box platform-external gate (balcony level 7)
IBL Junction box
Pipe routing
Towards C side
Towards USA cavern
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

10. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
Sector 5 Manifold → external Detector Area
Gap between IBL junction box platform-external gate (balcony level 7)
18x50mm OD lines can be fed through
350 mm
250 mm
Magnet people to be asked if can go below or must only use the side gap
Empty cable tray
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

11. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
Sector 13 Manifold to → IDEP
A. From IDEP through 1st muon layer
From Top
From Bottom
Some are covered with a ventilation pipe, can they be removed?
From Below
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

12. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
Sector 13 Manifold to → IDEP
B. From IDEP through 1st and second muon layer
From Top
From Bottom
Muon chamber moves for opening
Gap already contains vacuum hoses
From Below
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

13. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
13/09/2018
Sector 13 manifold→ External detector area
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

14. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
13/09/2018
Gaps on IDEP – How many flex lines do we need to fit?
Based on the layout presented by the detector groups a 5kW flex line is chosen as baseline for PP2 to PP1 distribution
The total number of flex lines foreseen is 38 (Pixel)+36 (Strips)=74 lines (37 per side)
The vacuum shielded diameter is estimated to be 50mm
Source= Bart Verlaat
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

15. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
13/09/2018
Gaps on IDEP
Gaps between fingers
W:325mm
D:100mm
Feed-throughs
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

16. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
13/09/2018
Gaps on IDEP
At present it looks feasible to route 37x 50mm flex hoses out of each IDEP
IDEP finger gaps,
70 x 350mm each
→5 flexlines
325 mm
70 mm
325 mm
Calorimeter large gaps,
160 x 350 mm each
→14 flexlines
160 mm
IDEP Feed-throughs: 325 x 100mm
9 flex lines/feed-through
2 feed-through/sector
18 flexlines/sector*
325 mm
100 mm
W:325mm
D:100mm
*Based on 50mm OD flex lines-Packing factor=1.2
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

17. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
Gaps on IDEP
-37 lines must escape from the IDEP
-Each feed-through can fit max 14 lines
C Side IDEP feed-throughs
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

18. Gaps on IDEP C Side IDEP feed-throughs 13/09/2018
ATLAS CO2 Meeting, 28 June 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

19. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
Backup Slides
-Alternative proposals for sector 13 manifold space
-Alternative proposals for routing from Sector 5 manifold to external detector area
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

20. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
Sector 13 Manifold
B, C: Sector 13: Platform between Muon BIL-BML, over metal rack (0.4 x0.5 x2.5m) or on the area of existing PP2 box
D: Sector 13 Platform between Muon BML-BOL
Instead of existing PP2 box
Sector 5 a b c
staircase
C-side View
b, c d
Sector 13
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski 4

21. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
Sector 13 Manifold → external Detector Area
Gap next to small Wheel muon layer
Light on the end of the tunnel
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

22. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
Sector 5 Manifold → external Detector Area
A. Gap between IBL junction box platform-external gate (balcony level 7)
B. Replacing ventilation pipe exiting at level 7
C. Gap between Muon BML-small Wheel
D. Free space on Sector 4
C-side View
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

23. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
Sector 5 Manifold → external Detector Area
A. Gap between IBL junction box platform-external gate
B. Replacing ventilation pipe exiting at level 7
C. Gap between Muon BML-small Wheel
D. Free space on Sector 4
20cm
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski

24. C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski
Sector 5 Manifold → external Detector Area
A. Gap between IBL junction box platform-external
B. Ventilation pipe exiting at balcony on level 7
C. Gap between Muon BML-Small Wheel
D. Free space on Sector 4
gate
C-side
CATIA Cross Sections of Sector 4
Common Mechanics Meeting, 26 October 2016
C. Bortolin, D. Giakoumi, B. Verlaat, L. Zwalinski