1. ALL CAPS TITLE
Source Author Name(s) & Affiliation (University/Lab/Company)
Presented by: Your Group Name & Member Names
For the final capstone presentation this slide will change to:
All Caps Title
Presenter’s Firstname Lastname
Affiliation (such as EKU, Dept. of Technology, NET program) 1

2. OUTLINE Overview of the presentation (5-7 phrases)
Presentation could have between slides
Usually conference or journal articles, and several other online sources as well, are organized into multiple sections:
Abstract, Introduction, Problem statement/Project information, Proposed design/ Implementation Techniques, Results, Conclusions, Future work, etc. Examine the Abstract and Conclusions section for identifying the big ideas and results of the published work.
If the resource you have selected is a video, try to identify the different logical sections it is organized into and analyze these as we had done for the article reviews in previous classes, such as those related to fiber-optic safety in NET ( ReviewNumber.pdf). You can also look at other related videos for information that goes into the different sections of the presentation for the Background. However, preferably only one source (article or video) should be identified and used as the primary resource for the group presentation. 2 2

3. MOTIVATION Show and Tell Highlight need with interesting facts
Broadly speaking why is this issue important?
No more than 5-7 phrases on each slide
Multiple slides may be used for motivating different aspects of the problem that is being solved through this technology or device 3 3

4. INTRODUCTION Background about issue
Any technical research you performed related to the topic (multiple slides may be used)
Perspectives of different sources about problem or issue
List essential theory needed for solving the problem or sub-problems 4 4

5. PROBLEM STATEMENT Specific problem being addressed – its scope
If sub-problems need to be solved list these (multiple slides may be used) 5 5

6. Assumptions
List the operating conditions or system constraints under which the problem is being solved
Any implicit or explicit assumptions about the product, the process, the ultimate users, the test conditions, intended vs. actual use 6 6

7. PROPOSED SOLUTION
List steps taken to solve the problem such as but not limited to:
Brainstorming (gist of ideas tried)
Proposed solution with justification
Arranging for software/hardware
Assembly
Testing and troubleshooting
Verifying results
This might continue on multiple slides 7 7

8. RESULTS List key results
Include lots of relevant images and multimedia only (maybe 1 or 2 goofy images in the presentation are OK)
Show simulation plots or clip if available
Show calculated results if available 8 8

9. CONCLUSIONS
Comment on significance of results – their applicability in the workplace
Each group member should comment on their individual learning about their specific capstone project through the resource selection and group presentation activity (at least one slide per group member) 9 9

10. FUTURE WORK Discuss implications of work – positive and negative
Possible extensions to project
Invite audience for suggestions
Thank the audience
Provide your permanent contact
Include appropriate image or clip art
- Plan for 3-5 audience questions ahead of time 10 10

11. REFERENCES
Provide complete APA citation of the sources you referred to, along with persistent links
For the final capstone presentation, provide an APA reference to your PowerPoint as well as the project videos that will be produced for hosting through the EKU department of Applied Engineering & Technology 11 11

12. ACKNOWLEDGEMENTS
If any external photos, images, videos from other sources were used in the presentation acknowledge their use
Provide a thumbnail of image/video along with online/author information
You may acknowledge the assistance or contributions of others in the project 12 12