Presentation is loading. Please wait.

Presentation is loading. Please wait.

Grid Code Development Forum – 6 September 2017

Similar presentations


Presentation on theme: "Grid Code Development Forum – 6 September 2017"— Presentation transcript:

1 Grid Code Development Forum – 6 September 2017
Modifications Progress Update Grid Code Development Forum – 6 September 2017

2 GC0036 and GC0079 Review of Harmonics Assessment Standards and Processes (GC0036) This joint workgroup was established in 2010 to update the ENA administered standard on harmonics, G5/4. This standard is referenced in both codes. As the update to the standard does not directly result in code changes it is proposed to withdraw this code modification The Grid Code Panel have requested a progress paper be submitted to the next Panel meeting for discussion on 20 September It was also recently agreed that a facilitation modification be raised Frequency Changes during Large Disturbances and their effect on the total system - Phase 2 (GC0079) Phase 2 of the work being carried out by this joint workgroup deals with protection settings for <5MW generators and started in The driver for the work is from the System Operator, however code changes will only be to the Distribution Code and will only impact D-connected generators. This modification was recently consulted on and closed on 1 September 2017

3 GC0048, 68 90, and 91 GC0048, GC0090 and GC0091 These modifications will all be formally withdrawn following the acceptance of GC0104 at the next DCRP meeting. The GCRP Technical Secretary will send out a formal outlining that all of these defects are covered within the new modifications that have been raised (GC0100, GC0101, GC0102 and GC0104) GC0068: Grid Code New and Revised Unit Data & Instructions: This Modification has been approved by the Authority. However, implementation is contingent upon getting an agreed date for EBS go-live

4 GC0094 and GC0095 GC0094: Relevant Electrical Standards:
This Modification was withdrawn by the Proposer The GCRP Technical Secretary notified Industry of this and SSE will be taking over as Proposer for this Modification Following the raising of GC0103 SSE will be withdrawing this modification shortly GC0095 Transmission System Operation Guideline (TSOG): Modification on hold until formal modifications raised, further update to be given to Grid Code Panel in September

5 GC0096 and GC0097 GC0096: Storage, Definition and Assignment of Technical Requirements for Storage Technologies: This Modification is at Workgroup stage New timetable was submitted to the July GCRP meeting. The timetable was approved 20 Working day Workgroup Consultation Workgroup Report to be submitted to the October Panel meeting GC0097:TERRE: The solution for Grid Code processes is being progressed at Workgroup and a new timetable was approved at the last Panel meeting. The Workgroup Report will be presented to the January 2018 Panel meeting

6 GC0098 and GC0099 GC0098: Using GB Grid Code data to construct the EU Common Grid Model in accordance with Regulation (EU) 2015/1222 (CACM) and Regulation (EU) 2016/1719 (FCA) This modification was resubmitted to the July Grid Code Panel. The Panel agreed for the modification to proceed to Code Administrator Consultation and to follow the Self-Governance process. The Code Administrator Consultation for this modification closed on the 12 September 2017, find more information on our website GC0099: Establishing a common approach to interconnector scheduling consistent with the single intraday market coupling processes set out within Regulation (EU) 2015/1222 (CACM) GC0099 was raised at the May GCRP. P356 has been raised at the BSC Panel and the two modifications are working as a Joint Workgroup. The Workgroup is currently drafting the Workgroup Consultation

7 GC0100, GC0101 and GC0102 GC0100: EU Connection Codes GB Implementation – Mod 1 This modification was raised at the May GCRP. This Modification was accepted and the Workgroup need to Report back to the November GCRP meeting. The Workgroup are finalising the Workgroup Consultation. The responses will be discussed at meetings in October GC0101 EU Connection Codes GB Implementation – Mod 2 GC0102 EU Connection Codes GB Implementation – Mod 3 was raised at the June GCRP. This Modification was accepted and the Workgroup need to Report back to the November GCRP meeting. To be discussed today

8 GC0103 GC0103: Introduction of Harmonised Applicable Electrical Standards Raised as an urgent modification and discussed at Special Grid Code Panel meeting on 27 July 2017 The Authority sent their decision letter on 30 August 2017 outlining their decision that this modification should not be treated as urgent Initial Workgroup meeting to be held on 18 September 2017 If you want to be a Workgroup member please get in touch by ing

9 GC0104 GC0104: EU Connection Codes GB Implementation – Demand Connection Code Raised as modification and discussed at Grid Code Panel meeting in August 2017 Panel accepted the modification and agreed to move it to workgroup Initial Workgroup meeting to be held today


Download ppt "Grid Code Development Forum – 6 September 2017"

Similar presentations


Ads by Google