1. WP3 Local Control and Automation Hub,
Peter Rosengren, Ulf Wingstedt, Peter Kool

2. WP3 Objectives Specify middleware architecture
Develop WSN interfaces for data extraction from sensors.
Define the INERTIA energy ontology
Define external protocols for exporting data from local gateway/hub
Develop device managers for use in pilot
Develop prototype for semantic middleware
Develop occupancy flow matching algorithms

3. Tasks T3.1 Inertia Semantic Middleware Specification
T3.2 DER Device Managers
T3.3 Inertia Ontology, Inference Rules & Semantic Devices
T3.4 Multi-Sensoral Activity Flow Detection & Modeling in controlled environments
T3.5 Ambient and personalised UI & User profiling mechanism

4. T3.2 DER Device Managers M6-M18
Partners: CNet (7), ENG (4), Tecnalia(4), Indesit (5)
Develop device managers (IoT Devices, semantic components) for sensors/devices to be used in pilot
Extend the LinkSmart DDK with new types of sensors and DERs
Extend WS interface and provide RESTful interface

5. T3.2 Subtasks
Provide reference LinkSmart implementations for the following devices and frameworks
EnOcean family of sensors and actuators
Building Management System via OPC
Plugwise family of energy metering units
INDESIT Dishwasher via ZigBee
CERTH occupancy detection
TECNALIA physical/virtual DER components

6. T3.2 Progress this period EnOcean family of sensors and actuators
Ready for deployment with an initial set of environmental sensors and switches.
Building Management System via OPC
Implementation started. OPC software installed at CERTH with remote access available.
Plugwise family of energy metering units
Ready for deployment.
INDESIT Dishwasher via ZigBee
Initial verification of hardware/software and communication completed.
CERTH occupancy detection
Not started.
TECNALIA physical/virtual DER components

7. T3.2 Next steps EnOcean family of sensors and actuators
Testing with dimmer and light sensor (CNET)
Building Management System via OPC
Finalize IoTDevice development for OPC Client (CNET)
Plugwise family of energy metering units
No further work planned.
INDESIT Dishwasher via ZigBee
Finalize IoTDevice development (CNET, INDESIT)
CERTH occupancy detection
Verification of requirements and options for integration (CNET)
Investigate possibility for additional integration with existing Alarm System (CNet)
TECNALIA physical/virtual DER components
Definition of required DER components within the CERTH pilot (TECNALIA)
Verification of requirements and options for integration (TECNALIA, CNET)
Overall: Refine and define final information models for DERs

8. Deliverables
D3.1 Semantic Middleware Architecture and INERTIA Ontology Specification, M12, CNet
D3.2 Semantic Devices & Device Managers Specification and Ontology update, M18, TUK
D3.3 Ambient User Interfaces, User Behavioural Profiling and Activity Flow Framework, M24, Hypertech

9. WP3 Issues Suggestion to move D3.2 to M24
T3.3 reports to D3.2, TUK is responsible for D3.2 and task leder for T3.3
Suggestion to move T3.2 deadline to M24
T3.2 reports in D3.2
All work cannot not likely be finalized before end of March.
Role of ENG in T3.2 is not clear due to ENEL leaving the project.