1. prepared by R.A.Barlow 30/056/2016
CERN
TE-ABT-EC
LIU-ABT systems: PSB
BI.DIS10 controls
Agenda:
General controls (Roger Andrew Barlow)
Timing system (Christophe Chanavat)
IGBT’s R&D program (Tobias Stadlbauer & Luc Sermeus)
Fast interlocks studies (Felipe Cordobes Dominguez)
prepared by R.A.Barlow 30/056/2016

2. Generator prototype, Jura 6
BI.DIS10
Generator prototype, Jura 6
Status of technical progress
PLC program improvement
Recipe's added for settings
Some functionalities sill to be implement
New TIA library item for automated state machine control (in SCL)
To be desired in nearby future:
Integration of the triggering optical module inside the PFN
Optimization of capacitive dividers pickups
Fast interlocks integration
Review of logical connection to BIS ongoing (1 channel Vs. 4 channels) …still to be discussed by MPE group, now this looks more like 1 BIS system !

3. Slow control and cabling production
BI.DIS10
Slow control and cabling production
PLC controls production
95% PLC modules ordered, arrived ! + a few extra’s ...
FSU jobs created for the following:
ABTECMAINT-48 Installation components BI.DIS10 in BCER (Linac4/LS2)
ABTECPROD-18 Cablage des 6 PFN pour le BI.DIS10 (Naked shells ready) – September 2016 ?
ABTECPROD-20 JURA6 BI.DIS10 patch traversant prototype (Change-over proto) – HW done
ABTECPROD-21 Pre-production series for PLC crates BI.DIS10 (Master, OP, GPC, EDS) – on-going
FSU jobs created for the full production:
ABTECPROD-22 Production of series PLC crates for BI.DIS10 (Outside)
ABTECPROD-25 Patch panel de series pour BI.DIS10 au BCER (Outside)
ABTECPROD-19 Cablage des unites casette IGBT pour le BI.DIS10 (CERN?)
Chassis drawings and cabling drawings done, aim to have all this ready by end of MAY-2016 (on-time).
PDC production envisaged for September..., however and due to CL workload this will probably be realised in December 2016

4. PP prototype design for generator changeover
BI.DIS10
PP prototype design for generator changeover
PP for generator changeover strategy
Status of technical progress
PP prototype cut out done
Improvement for coaxial feedthroughs, new inserts supports 5mm coax, improved attenuation factor, lower risk of reflections...
Still to be carried out, modification to JURA6 cage to adapt switch-over strategy.

5. JU6 H/W for Timing and FSC
BI.DIS10
JURA6 HW status
JU6 H/W for Timing and FSC
KiT’s timing system
FSC system
Status of technical progress
Identified rack space for KiT’s system and FSC
Removal of old manual earthing switch
Technix PS to be lowered
New Ethernet connections demands

6. PFN shells cabling BI.DIS10 PFN ‘shells cabling’
Status of technical progress
Empty PFN shells, to be taken advantage for cabling (prior to coil assembly)
Needs all fans + ‘new’ fan assembly
Have all the PT100’s
To be cabled as per new drawings

7. DIC/DEC and UPS systems
BI.DIS10
DIC/DEC and UPS systems
DIC/DEC issues
Status of technical progress
DIC completed (99.9%), sent to EN/EL
Nearly 600 cables ! (guestimate on-par)
DEC to be finalized, pre inspection of number of cables in existing BI.DIS + campaign during EYETS to mark cables to be removed and file into a DEC.
UPS systems
RA302
UPS + standard outlet
RA303
RA304
RA305
RA306
RA435
RA301
RA329
RA328
 Standard outlet

8. BI.DIS10
Planning review

9. BI.DIS10
Documentation
PBU-MSMIA-ES Functional Specification BI.DIS10 Controls (EDMS ) Released
PSB-MSMIA-ES Engineering Specification BI.DIS10 controls (EDMS ) Under approval/In Work
PSB-MSMIA-ES Engineering Specification, Beam Interlock Specification For Booster BI.DIS10 with linac4 (EDMS ) In work
PSB-MSMIA-ES Functional Specification, BI.DIS10 Fast interlocks (EDMS ) Engineering check
PSB-MSMIA-ES Engineering Specification, BI.DIS10 Fast interlocks (EDMS ) In work
PSB-MSMIA-ES BI.DIS10 GENERATOR SPARE CONNECTION TO MAGNET PROCEDURE (EDMS ) Under approval
PSB-EQCOD-XX-XXX – Functional Specification, Operational requirements for the controls of the new distributor BI.DIS10 – EDMS ??? – In Work